Water pumps

Pressure: 8.5 bar

... Pump at pressures up to 125 psi (8.5 bar) with the L/S High-Performance pump head and the included L/S 16HP high-pressure tubing Easy-to-use precision drives offer precise speed control and digital display of rpm—ideal ...

Flow: 5 l/min - 20 l/min

... TPS-5——TPS-20 Voltage:120/260V Frequency:50/60Hz Power:5-18W AirFlow：5-20L/min ...

Flow: 19 ft³/min
Pressure: 80 psi

... gallon drum). Ensure that the drum pump is securely attached to the drum. Next, turn the knob of the Drum Storm counterclockwise. In less than 2 minutes, a high-powered vacuum fills up the drum. The drum and the pump ...

Flow: 826 l/min - 1,548 l/min
Pressure: 0 bar - 400 bar
Power: 0 kW - 700 kW

... PF 770 series horizontal septuplex plunger pumps, are designed for pumping high pressure water, water emulsion and other fluids.* PF 770 ensure the most constant hydraulic flow with the minimum pulsations and ...

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

... Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting ...

Flow: 0.0032 m³/h - 0.026 m³/h

... lubrication. The results are better pump performance and longer pump life. This diaphragm pump is simplex but is field-convertible to duplex, includes a 1/3 horsepower motor, and 316 stainless steel liquid ...

... air-driven pump produces medium to high liquid pressures and services oil, water and compatible chemicals. The Model S-216-J standard pump is offered in ten ratios (area of large air ...

Flow: 0 l/h - 1,000 l/h
Pressure: 8 bar

... Standard micrometric manual adjustment 1mm per turn Optional electric actuator, 4-20 mA or 0-10 V command with manual override Optional motor with integrated inverter for frequency control Silver painted aluminium ...

Flow: 75 l/min
Pressure: 0 bar - 8.4 bar
Head: 84 m

Flow: 0 m³/h - 4,000 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 220 m

... abandon of mechanical seal pumps). Design features Pumps of the series CN MAG-M are horizontal single-stage volute casing pumps It is a modular configuration of either bare shaft end or close-coupled ...

Flow: 29.5 l/min
Pressure: 14 bar - 417 bar

... This is a PVX pump that is highly versatile and designed for use in operations related with mobile applications and also industries. It is applicable to provide dependable and long term service as it is equipped with maximum shaft speed ...

... form of a flat plate, is mounted at an oblique angle on the end of the pump shaft. Notched teeth are located in peripheral stator bars to chop the material during passage through the pump. Rotation of the impeller reduces ...

Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW

... The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their unique crankcase, ...

Flow: 2 m³/min - 45 m³/min
Head: 60 m - 120 m
Power: 1.5 kW - 15 kW

Flow: 300 m³/h
Pressure: 24 bar

... Product overview: The screw pump can be used to transport neutral or corrosive liquids, clean or abrasion liquids, liquids that contain gas or are prone to bubble formation, high or low viscosity liquids, including ...

Flow: 0 m³/h - 440 m³/h
Pressure: 0 bar - 24 bar

... The Compact C Range progressing cavity pump has been manufactured by Mono to offer you a transfer pump designed to fit into compact spaces, whilst reliably performing to the maximum duty ...

Flow: 0 m³/h - 350 m³/h
Pressure: 0 bar - 5 bar

... Steimel seawater pumps are used for cooling via heat exchanger of high and medium-speed diesel and gas engines. The gear driven pump is flange-mounted to the engine’s gear box. Belt driven pump is available ...

Flow: 0 m³/h - 550 m³/h
Pressure: 10 bar - 16 bar
Head: 0 m - 105 m

... • TKF-M series pumps has designed for pumping non-abrasive and small particulars liquids. • Pump diamensions are acceptable TS EN 733 standard. • Suction and discharge flanges are suitable standard ...

Flow: 10.5 l/s - 400 l/s
Head: 25.4 m - 94.2 m

... ZGB(P) slurry pumps is horizontal cantilever single-stage, single-suction, double-case and high head of delivery centrifugal slurry pump. Series ZGB(P) UP-to-date generation Slurry Pump with large ...

Flow: 10.5 l/min
Pressure: 2 bar - 8 bar

... 31221/OT Air-operated rotary gear pump for dispensing fluids such as oil, antifreeze, diesel and water. Stainless steel pump body (mod. 31221), brass gears, Viton gaskets and stainless steel shaft. ...

Flow: 5 m³/h - 3,500 m³/h
Head: 4 m - 105 m

... FIELDS OF APPLICATIONS • Water supply and booster stations. • Irrigation, sprinkling, drainage processes. • Tank systems. • Hot-cold water circulation in cooling systems. • Pumping of condensed water. • ...

Flow: 1 l/h - 20 l/h
Pressure: 15 psi - 145 psi
Power: 30 kW

... metering pump is LIGAO newly designed digital pump with an advanced microprocessor control board. The innovative big LED screen display the instant flow rate and the accumulated flow for easy reading. It has the same ...

Flow: 0 us gal/min - 120 us gal/min
Head: 70'00"
Power: 0.75, 0.4, 0.5 kW

... MOTOR 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class ‘F’ (155ºC), rated IP68. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are enclosed with high ...

... The electronically commutated water circulation pump (WUP) with its brushless DC motor is a dependable alternative to conventional motor vehicle pumps with their wear-prone mechanical ...

Flow: 121, 112 l/min
Head: 12, 11 m
Power: 0.25 kW

... Energy saving Capacity dry running Available PP- PVDF Attacks: Rigid duct flexible piping Flanged ...