Controller for centralized lubrication system VIP5

The VIP5 controller has been designed with an extensive set of parameters that offer unrivalled ease and flexibility for controlling and monitoring your automatic lubrication system - from a simple timed system, injector, progressive or dual line system. Three operating modes have been designed into the VIP5 to offer control possibilities not found elsewhere in single, compact and affordable unit. No need for many different version of controllers any longer - the VIP5 does it all. CYCLE MODE: This "conventional" operating mode allows the lubrication system to remain on standby either with a time based system, an external signal or a combination of both. When using a combined mode you can decide if the timer should initiate a Lubrication cycle or flag an alarm condition because no signal has been detected within the timeout. PULSE MODE: This new operating mode allows the external signal to drive both the Standby and lubrication Phases whilst allowing you to connect your Cycle or pressure switch to monitor that your system is operating correctly during all the lubrication phase. A Suspend Timer function allows the system to suspend the lubrication phase if the driving external signal ceases. This operating mode is ideal for chain or conveyor lubrication where the quantity of lubricant is determined by the movement of the conveyor, yet the correct output of lubricant is determined by a cycle or pressure switch connected to the metering devices.