Semi-automatic cupcake production line JETNUT 744

for the food industry

Our confectionery equipment production is located in Varna, Republic of Bulgaria. All our equipment has received declarations of conformity of our equipment to the requirements of the European Union. The NutFiller device is made in the form of a line that stage-by-stage, as delicately as possible, with high precision and accurately carries out the process of assembling the finished Nut. The order of operation of the device is as follows: Operators manually place Nut Shells* on the conveyor A step-by-step conveyor moves transport carts filled with Shells from one section of the line to another. The first section is the section for grading and preliminary visual control. Here the operator checks the integrity and correctness of the geometry of the Shells sent for alignment. If necessary, it rejects the damaged ones and replaces them with whole Shells. The parking time of the transport cart on the site (with 24 shells on board) is 14-16 seconds. Corresponds to the setting of the JetNut 744 furnace with which the NutFiller is synchronized. The second section is the section for aligning blanks before gluing. In this area, the shells on the transport trolley are aligned relative to each other using a special mechanism. Proper alignment is a guarantee of geometrically correct and accurate gluing of the Nut. The alignment time is the same – 14-16 seconds. The third section is the section for the final visual inspection of the Shells immediately before filling and gluing. The parking time of the cart with 24 Shells is 14-16 sec.