Exhibit with us
*mydirectindustry  
English
  1. Electricity - Electronics
  2. Switch and Relay
  3. Electromechanical relay module
  4. Opto 22
video corpo

Electromechanical relay module GRV-OMRIS-8
DCACwith LED indicator

Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator - image - 2
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator - image - 3
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator - image - 4
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator - image - 5
Electromechanical relay module - GRV-OMRIS-8 - Opto 22 - DC / AC / with LED indicator - image - 6
Add to favorites
Compare this product

Characteristics

Type
DC, AC, electromechanical
Other characteristics
with LED indicator, 8-channel
Protection level
isolated
Load current

Max.: 5 A

Min.: 0 A

Load voltage

Max.: 250 V

Min.: 0 V

Description

Overview
  • Mechanical relay output module for groov EPIC providing 8 independent, isolated electromechanical Form C (changeover) channels.
  • Each channel can be wired normally open or normally closed to switch AC or DC loads.
  • Module cover includes an LED status indicator and a touch-sensitive pad that displays module information and wiring diagrams on the groov EPIC processor.
  • Channel-to-channel isolation and very low contact leakage when open make the module suitable for driving electronic coil contactors and mixed-load applications.
  • Mounts on a groov EPIC chassis with a GRV-EPIC-PR1 processor and integrates with other groov I/O modules (analog, discrete, serial).
  • Factory tested twice before shipment; warranty: 30 months.


Technical specifications
  • Number of Channels: 8
  • Line Voltage Range (nominal): 0–250 VAC or 5–30 VDC
  • Current Rating: 5 A per channel
  • Surge Current: 6 A peak for 1 second
  • Recommended Fuse / Circuit Breaker: 5 A at 250 VAC / > 30 VDC per channel (fusing not provided)
  • Leakage Current: < 2 µA @ 250 VAC
  • Contact Resistance: ≤ 100 mOhms
  • Turn-on Time: 8 ms
  • Turn-off Time: 4 ms
  • Operating Life (to specification): Min. 30,000 cycles at max. ratings
  • Mechanical Life: Min. 10,000,000 cycles
  • Transient Clamp Holding Voltage: 440 V
  • Transient Clamping Voltage (max.): 720 V
  • Isolation (coil-to-contact): 4000 VAC rms, 1 min., 10 mA detect/channel
  • Isolation (channel-to-channel): 300 VAC operating, 1500 V rms max.
  • Chassis Power Consumption: 1.4 W
  • Minimum groov EPIC Firmware Version: 1.0.0
  • Minimum PAC Project Version: 10.0000
  • Minimum Library Package for CODESYS Version: 1.0.0.0
  • Wire Size: 28–14 AWG
  • Wire Strip Length: 0.315–0.354 inches (8–9 mm)
  • Torque, connector screw: 2.5 in-lb (0.28 N·m)
  • Torque, hold-down screw: 3.5 in-lb (0.4 N·m)
  • Temperature (operating): -20 °C to +70 °C
  • Temperature (storage): -40 °C to +85 °C
  • Shock (misoperation): 5 G
  • Shock (survival): 100 G
  • Relative Humidity (non-condensing): 5–95%
  • Agency Approvals: UL/cUL (Class 1, Div 2); CE: ATEX (Category 3, Zone 2) and RoHS; DFARS; CB Scheme; UKCA
  • Warranty: 30 months

Catalogs

No catalogs are available for this product.

See all of Opto 22‘s catalogs

Other Opto 22 products

I/O

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.