Peripheral pump BASIC

for liquidswith asynchronous motorstationary

Overview
Close-coupled peripheral pumps of the BASIC series are designed to pump clean liquids without abrasives or suspended solids. They are suitable for non-explosive liquids that are not aggressive to the pump materials.

Performance

• Liquid temperature: up to 35 °C for domestic use (CEI EN 60335-2-41) or up to 90 °C for other uses; ambient temperature not higher than 40 °C
• Flow rate: up to 3 m3/h
• Maximum head: up to 80 m

Technical features

• Pump body: cast iron G20 with cataphoretic treatment
• Motor bracket: cast iron G20 with cataphoretic treatment
• Impeller: stamped brass (UNI-EN 12165)
• Pump shaft: stainless steel AISI 420F
• Mechanical seal: carbon - ceramics

Motor
The drive motors are asynchronous squirrel-cage type, closed, with external ventilation.

• Single-phase models: incorporated motor protection and capacitor permanently connected
• Three-phase models: motor protection must be installed by the customer using equipment compliant with current standards
• Insulation class: F (Class B for Basic 50)
• Duty: S1
• Degree of protection: IP44 (motor)
• Terminal board protection: IP54

Technical specifications

• Product type: Close-coupled peripheral pump
• Series / model: BASIC
• Suitable liquids: clean liquids without abrasives or suspended solids; non-explosive and non-aggressive to pump materials
• Liquid temperature: up to 35 °C (domestic, CEI EN 60335-2-41); up to 90 °C for other uses
• Ambient temperature: up to 40 °C
• Flow rate: up to 3 m3/h
• Maximum head: up to 80 m
• Pump body: cast iron G20 with cataphoretic treatment
• Motor bracket: cast iron G20 with cataphoretic treatment
• Impeller material: stamped brass (UNI-EN 12165)
• Shaft material: stainless steel AISI 420F
• Mechanical seal: carbon - ceramics
• Motor type: asynchronous squirrel-cage, closed, external ventilation
• Single-phase: incorporated motor protection and permanently connected capacitor
• Three-phase: motor protection to be installed by customer
• Insulation class: F (Class B for Basic 50)
• Duty: S1
• Degree of protection: IP44 (motor); terminal board IP54