Centrifugal pump Drain TS series

for wastewaterelectricsubmersible

Highlights

• User-friendly – lightweight, ready-to-plug version (Plug&Pump)
• Perfect for mobile applications – robust, impact-resistant stainless steel housing
• Reliable operation – stainless steel-encapsulated motor with sheath flow cooling, mechanical seal and sealing chamber

Product selection (table)
Product description | Discharge port | Free ball passage of the hydraulics | Rated power P2 | Connection cable length L | Mains connection | Article number
Drain TS 32/9-A | Rp 1¼ | 10 mm | 0.3 kW | 10 m | 1~230 V, 50 Hz | 6043943
Drain TS 32/12-A | Rp 1¼ | 10 mm | 0.6 kW | 10 m | 1~230 V, 50 Hz | 6043945
Drain TSW 32/8-A | Rp 1¼ | 10 mm | 0.3 kW | 10 m | 1~230 V, 50 Hz | 6045167
Drain TSW 32/11-A | Rp 1¼ | 10 mm | 0.6 kW | 10 m | 1~230 V, 50 Hz | 6045166

Design
Submersible pump for stationary and portable wet installation. Pump with fitted float switch for fully automatic operation.

Liquid

• For the pumping in domestic areas of: sewage not containing faeces
• Wastewater (with small amounts of sand and gravel)

Equipment / function

• Self-switching thermal motor monitoring
• Integrated capacitor
• Fitted float switch

Type key
Example: Drain TSW 32/8-A/B 10M KA
TS = Series
W = Version: TSW = with twister function, TS = without twister function
32 = Nominal diameter of discharge connection
8 = Max. delivery head in m (example position in type key)
A = Version with float switch and plug
B = Version number
10M KA = Connection cable length

Technical data

• Mains connection: 1~230 V, 50 Hz
• Submerged operating mode: S1
• Non-immersed operating mode: S3 25%
• IP rating: IP68
• Insulation class: F
• Fluid temperature: 3 ... 35 °C (37 ... 95 °F)
• Fluid temperature, short-term for 3 min: 90 °C (194 °F)

Materials

• Pump housing: 1.4301 (AISI 304)
• Impeller: PCL (composite)
• Strainer: Stainless steel
• Motor housing: 1.4301 (AISI 304)
• Seal: On pump side: C/SiC (BQ1PFF); On motor side: NBR; Static: NBR
• Shaft end: 1.4301 (AISI 304)

Construction
Drain TS: Sewage pump with open multi-channel impeller and vertical threaded connection. Pump housing with strainer made of stainless steel, impeller made of composite material. Single-phase motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Oil-filled sealing chamber with double sealing: mechanical seal on the pump side and rotary shaft seal on the motor side. Connection cable with float switch and fitted plug (CEE 7/7).

Drain TSW: As Drain TS, with integrated turbulator (twister function) that guarantees permanent turbulence within the pump's intake area to prevent settling of sediments, ensuring a clean pump sump and reduced odour build-up.

Scope of delivery

• Pump
• Swing check valve, pre-assembled
• Hose connection, enclosed
• Installation and operating instructions

Caractéristiques / spécifications techniques

• Nom du produit: Drain TS/TSW 32
• Model variants: Drain TS 32/9-A, Drain TS 32/12-A, Drain TSW 32/8-A, Drain TSW 32/11-A
• Discharge connection: Rp 1¼
• Hydraulic free ball passage: 10 mm
• Rated power: 0.3 kW and 0.6 kW options
• Connection cable length: 10 m
• Mains: 1~230 V, 50 Hz
• Protection class: IP68
• Operating temperature range: 3–35 °C (short-term up to 90 °C)
• Materials: stainless steel pump and motor housing (AISI 304), composite impeller