Dickow Pumpen crude oil pumps

Flow: 0 m³/h - 1,400 m³/h
Pressure: 25 bar
Head: 0 m - 250 m

... Product-side SiC sleeve bearings allow dry contact with the pumped fluid; drive-side bearings are oil-lubricated rolling bearings. Internal circulation removes heat from eddy-current losses. Direct motor flange facilitates ...

Flow: 0 m³/h - 200 m³/h
Pressure: 16 bar
Head: 0 m - 150 m

... The NCV type is a single-stage inline volute pump with opposite suction and discharge nozzles. Axial thrust is balanced by relief bores; wear rings are standard on both suction and discharge sides. The pump shaft is coupled ...

Flow: 0 m³/h - 1,000 m³/h
Pressure: 16 bar
Head: 0 m - 250 m

... submersible pump with shaft seal based on the two-pipe principle (separate shaft guide pipe and pressure pipe). The hydraulic pump section is located in the container or in the pumped medium and is connected ...

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... pressure-side arrangement of the venting stage ensures complete deaeration of the suction line and pump casing.

Magnetic coupling and heat dissipation
The pump uses a permanent magnet coupling; the gap ...

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... throttle gaps. Wear rings on suction and pressure sides are standard. The pump shaft is supported by a cylindrical ball bearing and a double-sided angular contact ball bearing. Pumps can be operated in both clockwise ...

Flow: 0 m³/h - 600 m³/h
Pressure: 16 bar
Head: 0 m - 500 m

... standard on suction and pressure sides. The pump shaft is supported by a cylindrical ball bearing and a double-sided angular contact ball bearing. The pump uses grease lubrication.

Applications

• oil