- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- Level switch >
- ELETTROTEC
ELETTROTEC level switches
Process temperature: -10 °C - 90 °C
0.5~1.0KG-cm torque 1 RPM speed SPDT switch output 220VAC or 24VDC supply IP65 protection class Pedal type options MSS series rotary paddle switches are used for level ...
ATEK SENSOR TECHNOLOGIE
Process temperature: -45 °C - 204 °C
Process pressure: 19 bar - 70 bar
... Reflectometry (TDR)-based, 24 VDC level detectors designed to accurately measure the various layers in interface level measurement applications. Encompassing a number of significant engineering accomplishments, ...
Magnetrol - AMETEK
Process temperature: -40 °C - 121 °C
Process pressure: 55, 103 bar
... ultrasonic level switches utilize ultrasonic contact technology for measuring level in clean liquid applications. These integrally mounted level switches offer either a 8-amp DPDT gold ...
Magnetrol - AMETEK
Process temperature: -40 °C - 85 °C
Process pressure: 138 bar
Echotel® Model 940 and 941 Ultrasonic Level Switches are compact integral units that utilize pulsed signal technology to perform high or low level measurement in a wide variety of liquid applications. ...
Magnetrol - AMETEK
Process temperature: -40 °C - 150 °C
Process pressure: 40, 25 bar
... again is produced and the output state reverts to indicate material absence. The tuning fork level switch can be widely applied to detect the min. and max. level in tanks, silos and ...
FineTek Co., Ltd.
Process temperature: -40 °C - 85 °C
Process pressure: 1 bar - 40 bar
... in the CIP and SIP cleaning applications, the surface roughness (Ra) level can be adjusted according to customer's needs, suitable for use in pharmaceutical and food processing industry applications. Working ...
FineTek Co., Ltd.
Process temperature: -10 °C - 100 °C
Process pressure: 60, 65 bar
... a variety of liquid level detection 。Unique SD22 design, switch body and tip disconnects USE 。Machine protection of fluid levels 。High and low level detection ...
FineTek Co., Ltd.
Process temperature: -40 °F - 145 °F
Process pressure: 1,000 psi
... simple and reliable on/off level switch. The compact one-piece unit is inserted through a standard 3/4-inch , probe dependent, NPT opening into the vessel so that the sensing element is positioned ...
AMETEK Drexelbrook
Process temperature: -40 °C - 70 °C
Process pressure: 1,000 psi
ThePoint Line Powered Level Switch and ThePoint Loop Powered An excellent product for most of your point level application needs. ThePoint offers many of the features and benefits of ...
AMETEK Drexelbrook
Process temperature: -40 °C - 85 °C
Process pressure: 1,000 psi
Our Best and most versatile point level switch for liquids, slurries, granulars, and interface applications. IntelliPoint needs no more than installing the sensor in your vessel and connect the power. ...
AMETEK Drexelbrook
Process temperature: -20 °C - 350 °C
Process pressure: 3, 4.5 MPa
LXT207 float-operated with test device level switches are suitable for controlling liquid level at horizontal mounting. The float equipped with an extended arm moves a couple magnetic mechanism to actuate ...
Golden Mountain Enterprise
Process temperature: -20 °C - 130 °C
The vertical float level switch consist of a float with a built in permanent magnet, and guide tube built in reed switch (one or more), when the float rise up or fall down in liquid that ...
Golden Mountain Enterprise
Process temperature: -20 °C - 130 °C
Process pressure: 10 bar
... Pressure: please refer to the float spécification Limited Working Température: please refer to the float spécification - Switch Mode: SPDT - __ Setting Point: One float point or Two float points - ; ]
Golden Mountain Enterprise
Aalborg® instruments’ Enhanced Optical Sensor Switch Hi-Low • Eliminates high or low flow rates from damaging your equipment and processes • Enhanced Sensor Switches are available with one or two ...
Process temperature: 0 °C - 50 °C
The MF is a float switch that turns up and down using the weight as the fulcrum. It is designed to be the smallest possible size. It is available in two types; contact "a" (normally-open contact) and contact "b" (normally-close ...
Process temperature: 0 °C - 50 °C
The RF is a float switch that turns up and down using the weight as the fulcrum. It can detect cut-in and cutout water levels with single float. The "Snap on-off" action ensures stable operations in clean ...
Process temperature: 0 °C - 50 °C
The MC is a heavy-duty type float switch with a shock absorber. Having equipped with a high grade micro switch, the MC-2 assures trouble-free operation in the liquid containing much suspended solids and ...
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
Electromagnetic level indicators to one or two contacts 1/2" Bsp threaded Connection SPST or SPDT Contacts USE: Made to ensure, with maximum safety, the minimum or minimum and maximum levels of liquids ...
Fratelli Giacomello
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
Electromagnetic level indicators to one or two contacts 3/4" Bsp threaded Connection SPST or SPDT Contacts USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks ...
Fratelli Giacomello
Process temperature: -20 °C - 120 °C
Process pressure: 0 bar - 10 bar
Electromagnetic level indicators at a control point M18x1 5 connection SPST or SPDT Contact USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic ...
Fratelli Giacomello
Process temperature: -30 °C - 80 °C
For limit level detection in conductive liquids as well as control jobs in connection with conductive rod and suspension electrodes -Narrow construction – width 22.5 mm -Adjustable sensitivity -Closed ...
NIVUS GmbH
Process temperature: -25 °C - 80 °C
For limit level detection of conductive liquids as well as control of conductive liquids in Ex areas, for connection of conductive rod and suspension electrodes -Ex-ia version, Zone 0 -Optical alarm and operation ...
NIVUS GmbH
Process temperature: -20 °C - 90 °C
... is interrupted (e.g. cable break) this is detected and displayed by the ER-107 and the source contact switches to alarm status. When the filling level of the container reaches the conductive pickup's ...
NIVUS GmbH
Process temperature: 0 °C - 150 °C
Process pressure: 0 bar - 10 bar
... also possible to detect non-conductive media. The level switch is particularly suitable for use with foaming media because the foam itself is not detected. The output of the level switch ...
KOBOLD Messring GmbH
Process temperature: -5 °C - 55 °C
... the liquid level falls and the probe is no longer submerged in the liquid. The Maximelder probe is mounted in the top area of the tank and generates an alarm when the liquid reaches the probe. The liquid levels ...
AFRISO-EURO-INDEX
Process temperature: -10 °C - 60 °C
... conductive liquids whose level is to be limited or controlled. The liquids such as water, emulsions or waste water must neither foam excessively nor be viscous or adhesive (bridging). CoFox® ELT 8 can be operated with ...
AFRISO-EURO-INDEX
Process temperature: -10 °C - 60 °C
• Specially designed for applications in the food industry • Detection of interface layers between liquids with different levels of conductivity (product, foam) • Adjustable delay helps to avoid unwanted ...
AFRISO-EURO-INDEX
Process temperature: 100, 70, 90 °C
... detecting 1 to 4 levels. It is available with or without an integrated temperature sensor. It can easily control minimum and maximum levels. The device can be used for safe control and monitoring of the ...
Process temperature: 0 °C - 80 °C
... float level switch which comprises of 1, 2, or 3 contacts. For model having a 1 contact, it has an integrated temperature sensor. This is the suitable equipment which offers a simple and an economical ...
Process temperature: 0 °C - 80 °C
... from Galvatek is a float switch with a simple and easy for use design specifically manufactured for liquid operations without covering. This device offer a smooth and cost-effective solution to control and check the liquid ...
Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
... and low level in the same tank whose hysteresis does not exceed 1.5 meter. These float level switches are used wherever magnetic level controllers can not be used because of impurities ...
ATMI
Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
This level regulator is technically similar to SOBA but smaller in size, ideal for small tanks. It detects the level by tilting the float which activates the contact connected to a panel control , ...
ATMI
Process temperature: 85 °C
Process pressure: 0 bar - 3.5 bar
... low level, the other as a high level, it is also possible to regulate severals levels. The SOBA level regulator are equipped with an external loaded resin ballast ...
ATMI
Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 15 bar
Level Switches made of Brass / NBR for mounting through top or through bottom G1/8" - Mounting thread 1 switch contact Applications General level measurement at tanks and ...
Barksdale
Process temperature: -30 °C - 160 °C
... damping of the vibration is detected by the electronics which switch the output relay after a configurable time delay. The vibrating rod level switch is the perfect solution for single ...
Delta Mobrey Limited
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 3.45 bar
The M8000-C miniature liquid level switch has a polypropylene stem and a polypropylene float. Polypropylene is typically suitable for use with acidic liquids such as those found in electroplating and ...
Madison Company
Process temperature: -25 °C - 80 °C
Process pressure: 10 bar
... fill level drops again, the float does as well and actuates the reed contact again. The switching function set at the factory • contact closes when the level rises • contact opens ...
SIKA
Process temperature: -30 °C - 80 °C
Compact single level vertical mount LS01 Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other cables and connectors. Specifications Contact ...
StandexMeder Electronics GmbH
Process temperature: -40 °C - 160 °C
Compact stainless steel single level vertical mount LS02 (S) Series Liquid Level Sensor used in level control, detection and monitoring. High power switch option, other ...
StandexMeder Electronics GmbH
Process temperature: 200 °C
Process pressure: 0 bar - 12 bar
Versatile stainless steel LS05 Series Liquid Level Sensor for single, multi and continuous level control, detection and monitoring capable of high temperature resistance up to 200°C (SS) and pressure ...
StandexMeder Electronics GmbH
Process temperature: -20 °C - 50 °C
Combined sewers overflow monitoring or Sewers overflow monitoring IJINUS presents the new overflow detector, incorporating CapAir® technology, an IJINUS patent, simplifying installation ...
Process temperature: -40 °C - 70 °C
... high-performance data logger for storage of measurement values. Water level measurement in water level stations with float shaft and in pipes from Ø 4 " Parameters: Water level ...
Process temperature: -40 °C - 100 °C
Process pressure: 7 bar - 25 bar
The electro-optical level sensor is used to monitor the level of liquids. The model LLS.ELS1150 is an enhanced electro-optical level switch from IMS sensors. The series ...
Process temperature: -40 °C - 100 °C
... Polarity, Over Voltage Protection • High Performance ASIC based compact Sensor • Technology: optical sensor • 1mm liquid level detecting precision • Low Power: 10mA with output low • Temperature range: -20~55℃ ...
Process temperature: -20 °C - 200 °C
Process pressure: 0 Pa - 2,500,000 Pa
... installed. FDM Mini Float Level Switch, Lquid Level Switch (Food Grade) FC/FD series is a magnetic float level switch type of product ...
Mütec Instruments GmbH
Process temperature: -40 °C - 80 °C
Process pressure: 0 bar - 10 bar
SCX1 Vibrating Probe Level Switch, Solid Level Switch, Bulk solids handling (Food Grade) The Finetek vibrating probe switch is highly versatile and ...
Mütec Instruments GmbH
Process temperature: -20 °C - 200 °C
Process pressure: 0 bar - 35 bar
The FC/FD series is a magnetic float level switch product line based upon two principles, buoyancy and magnetism. The floats of the FC/FD magnetic float level switch ...
Mütec Instruments GmbH
Process temperature: -50 °C - 180 °C
A level switch, is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
Process temperature: -20 °C - 120 °C
A level switch is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
Process temperature: -20 °C - 120 °C
A level switch is an instrument that allows, in containers or tanks, measuring the level of liquids and solids to identify if they reach or exceed a predetermined level. NF ...
GESA TERMOMETROS
The tuning fork level switch has piezoelectric components, which are used for driving and signal feedback to cause resonance of the probe. When a material level comes into contact with ...
RETTAR
Process temperature: -40 °C - 130 °C
Process pressure: 0 bar - 20 bar
The tuning fork level switch has piezoelectric components, which are used for driving and signal feedback to cause resonance of the probe. When a material level comes into contact with ...
RETTAR
Process temperature: 550 °C
Process pressure: 20 bar
The electrode rod of the RF admittance level switch is composed of a measuring electrode, a shielding electrode, and a grounding electrode. The three electrodes are isolated by insulating materials. When ...
RETTAR
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar
... magnetic reed switch contacts or a reed switch chain transmitter. One or more floats, free to slide along the guide tube, magnetically act on the contacts positioned at the intervention points, switching ...
Riels Instruments
Process temperature: -40 °C - 135 °C
Process pressure: -1 bar - 100 bar
... the event of a fluctuating level, for example when filling the tank. Compensation for foam, bubbles and condensation as well as for sticky fluids can be set in the Flex Programmer software. The CONTACT-RLBFI level ...
Riels Instruments
Process temperature: -20 °C - 120 °C
Process pressure: 10 bar
The RIL210 float level switch can be used for dirty liquids, water, petroleum, refrigerant oils. It tolerates the presence of metal particles, including ferrous ones, since the float does not carry a ...
Riels Instruments
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining