HBM amplifiers
Voltage: 24, 110, 230 V
Current: 6 A
Frequency: 60, 50 Hz
The VNR21.22 control units are designed as interface for conductive level probes SL series. These electronic units are used to control liquids that have a minimum electrical conductivity of 1 S. The system is based on measurement ...
Voltage: 24, 230 V
Current: 5 A
Frequency: 50, 60 Hz
The VNR2300 control unit was designed as low cost interface for conductive level probes. These electronic units are used to control liquids that have a minimum electrical conductivity of 10 S. The system is based on measurement of the ...
Voltage: 230, 24 V
Current: 5 A
Frequency: 50, 60 Hz
This control unit with double measuring channels was designed as low cost interface for conductive level probes and is used to control liquids that have a minimum electrical conductivity of 8 S. The system is based on measurement ...
Voltage: 10 V - 30 V
Current: 200 mA
Frequency: 1 kHz
Fibre optics made of glass or plastic are used to transport the light from the sensor to the target and back.Fibre optics are especially suited for space-limited applications or for diffucult environmental conditions e.g. high temperature ...
Eickmann Elektronik GmbH&Co.KG
Voltage: 18 V - 240 V
Power: 18 W
Frequency: 45 Hz - 65 Hz
... distribution amplifier. Cost-Effective Capacity Microsemi's TSC 4340A fiber optic distribution amplifier provides a cost effective upgrade path, enabling networks to multiply the output from one UTCG ...
Microsemi
Voltage: 24 V - 260 V
Current: 300 mA
OPTOCOUPLED STATIC OUTPUTS • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. Each output is electrically insulated from each other, from power supply and from all the inputs. ...
BDC ELECTRONIC S.r.l.
Voltage: 24 V - 260 V
Current: 5 A
RELAY OUTPUT • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. The relay outputs have changeover N.O. + N.C. contacts electrically insulated from each other, from power supply ...
BDC ELECTRONIC S.r.l.
Voltage: 24 V - 260 V
Current: 300 mA
• OPTOCOUPLED STATIC OUTPUT • 1 Timed channel General Features: These units allow to amplify signals from NAMUR sensors or contacts. The delay time and hold time respect the input signal are adjustable through potentiometers on ...
BDC ELECTRONIC S.r.l.
Voltage: 24, 110, 230 V
Current: 4 mA - 20 mA
Frequency: 50 Hz - 60 Hz
... -proof models Applications - Power supply and switching amplifier for 2-wire transmitters - Switching amplifier for 4-wire active transmitters - Dedicated switching amplifier ...
Voltage: 5 V - 15 V
Current: 0 mA - 20 mA
ROGER™ GPS Line Amplifier is an amplifier that is used to allow for longer cable runs and/or signal splitting to several GPS Repeaters. It has a gain of +16dB at the GPS L1,L2 and GLONASS frequency ...
Roger-GPS Oy
Voltage: 115, 230, 24 V
ISG-A series: Single channel opto sensors with automatic setting, providing high sensitivity over the full range. ISG-N series: Single channel opto sensors with manual setting, providing high range, high power and dust immunity.
Pantron Instruments GmbH
The Fiber Optic Amplifier is a photoelectric sensor from the FX Series. It is designed with a standardized DIN rail fiber optic for mounting power supplies. This device comes with a Teach-in (FX4) or trimmer sensing adjusting (FX3).
Micro Detectors
Power: 10 W
... without band switching or swapping narrow band amplifiers resulting in faster and more accurate testing. The amplifier can be used in wireless communications and component testing wherever a highly linear ...
Giga-tronics Incorporated
Current: 4 mA - 20 mA
... in a more efficient and productive way. Reading its signal is difficult, but with an amplifier the job is made simpler, easier and more efficient. The amplifier is housed in an ABS enclosure allowing ...
Datum Electronics
Voltage: 10 V
Current: 4 mA - 20 mA
... series is suitable for use in strain gauges bridge like in 24 bit acquisition circuit, with a programmable gain. The digital amplifier is also utilized in 3 analog outputs, toward a supervision unit. The unit functions ...
ASA-RT s.r.l.
... • Charge amplifier 2661: This standard amplifier is used if there are no additional certificates required. • Charge amplifier 2667: This amplifier is ATEX certified ...
Voltage: 12 V - 24 V
EDFA Amplifier Flexible options such as Optical Booster, Preamplifier or In-line Amplifier Output power up to 23 dBm Data rate and protocol independent Amplifies multiple wavelengths over several hundred ...
MICROSENS GmbH & Co. KG
Voltage: 110, 220 V
Current: 100, 1 mA
Frequency: 50, 60 Hz
Voltage: 30 V
Current: 10 A
Frequency: 2 Hz - 20,000 Hz
Easy-to-use class-D power amplifier designed to work with electrodynamic shakers in the lab or in production. The nominal output power of the amplifier is 200 VA. Digital amplifier ...
RULA Technologies
Voltage: 44 V
Current: 11.5 A
Frequency: 20,000 Hz
Easy-to-use class-D power amplifier designed to work with electro-dynamic shakers in the lab or in production. The nominal output power of the amplifier is 500 VA. The amplifier is ...
RULA Technologies
Voltage: 78 V
Current: 18.5 A
Frequency: 20,000 Hz
Easy-to-use class-D power amplifier designed to work with electro-dynamic shakers in the lab or in production. The nominal output power of the amplifier is 1200 VA. The amplifier is ...
RULA Technologies
Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
EMGZ310.ComACT – Digital Tension Measuring Amplifier with Optional Operation via FMS-comACT App •Free FMS-ComACT app •3 key operation with LCD, simple procedures for offset and calibration. •Detachable terminal ...
FMS Force Measuring Systems AG
Voltage: 0 V - 10 V
Current: 0 mA - 20 mA
Power: 3 W
... standardized current and power outputs •14 bit resolution, cycle time 1 ms The EMGZ310 is a compact, digital strain gauge amplifier. It is designed for applications that involve the measurement or control of web tension ...
FMS Force Measuring Systems AG
Voltage: 0 V - 10 V
... Dual-Channel Amplifier for Profinet IO Features PROFINET IRT- or RT-Device Precise material tension over the entire measuring roller Communication cycle time ≥ 0.5 ms (IRT) Various installation ...
FMS Force Measuring Systems AG
Voltage: 207 V - 253 V
Current: 2 A
Power: 2 W
Application: Isolating switch amplifier with intrinsically safe control circuit class [Ex ia] IIC for inductive contacts according to DIN 19234 or NAMUR or mechanical contacts in hazardous industrial plants. Case:NORYL ...
Voltage: 230, 115 V
Current: 2 A
Power: 2 W
application: Bistable isolation amplifier with intrinsically safe control circuit class [Ex ib] IIC for Double inductive contacts according to DIN 19234 or NAMUR or mechanical contacts in explosion-hazardous industrial ...
Avago Technologies offers a broad selection of rf and microwave amplifiers including Power Amplifiers (PAs), Gain Blocks/Drivers, Low Noise Amplifiers (LNAs) and variable gain amplifiers ...
Voltage: 4.5 V - 5.5 V
Current: 110, 210 mA
Frequency: 2 MHz - 6,000 MHz
... wideband RF amplifiers are versatile building blocks that can easily be integrated into laboratory setups. With a bandwidth of 2MHz to 6GHz, they are ideal to boost the signals picked up by our EMC near field probes. ...
TEKBOX
Voltage: 5, 5.5 V
Current: 115, 225 mA
Frequency: 25 MHz - 3,000 MHz
... low power RF sources or to drive power amplifier stages. The TBDA1 wideband amplifiers are available with 14dB or 28dB gain. APPLICATION general purpose gain block RF driver amplifier
TEKBOX
Voltage: 5.5, 5 V
Current: 235 mA
Frequency: 25 MHz - 3,000 MHz
The TBMDA1 modulated wideband driver amplifier is designed in order to create an inexpensive signal source for immunity testing of electronic building blocks and products. It is designed to be driven by the tracking generator ...
TEKBOX
Voltage: 160 V
Current: 10 A
Power: 100 W
The MP104 is a high voltage, high output current, dual channel power amplifier targeted for piezo devices used to drive inkjet printer nozzles. Based on the Apex MP103, this next generation hybrid references the output ...
Apex Precision Product
Voltage: 200 V
Current: 10 A
Power: 100 W
The MP108 is a 10A, 200V power operational amplifier that features a very high 300kHz of power bandwidth for piezoelectric actuator and transducer drive applications. The MP108 has optional features such as four-wire ...
Apex Precision Product
Voltage: 100 V
Current: 15, 40 A
Power: 170 W
The MP111 is a 15A (40A PULSE), 100V power operational amplifier that features a very high 500kHz of power bandwidth for piezoelectric actuator and transducer drive applications. Pulse output current can reach 50A. The ...
Apex Precision Product
Voltage: 2.5 V
Frequency: 4 MHz
... Multiplier Applications - Analog computation Squaring circuits Modulation and demodulation Voltage controlled amplifiers Features - MLT04 replacement Four independent channels Four-quadrant ...
Voltage: 36 V
Applications Receiver for 24 V control systems A/D and D/C converters Signal conditioning Zero-crossing detectors I/Os, level shift Timing critical measurement equipment Time-to-digital converter interfaces (TDC) Features Independent ...
Applications Incremental encoders Features Differential scanning for track A and B Adjustable threshold for index track Z Gated index Z with switch-off capability Short-circuit-proof, TTL-compatible outputs 50mA LED current driver integrated Adjustable ...
Power: 0 W
Frequency: 2 GHz - 4 GHz
Broadcom’ MGA-31816 is a high linearity driver MMIC Amplifier housed in a standard QFN 3x3 16 lead plastic package. MGA-31816 is especially ideal for 50 ohm wireless infrastructure application operating from 1.5GHz ...
Broadcom
Voltage: 5 V
Voltage: 24 V
Current: 10 mA
Designed for strain gage sensors or potentiometers DIN rail fixture Front panel calibration shunt Compatible with the MCS trigger level modules The MCJ conditioner is fixed on a DIN rail in a polyamide casing. the I/O electrical connection ...
Voltage: 15 V
Current: 20 mA
Designed for strain gages sensors Format EUROPE Card version : ME 5400 Front rack panel : ME 5400 RL Front rack casing : MR 5400 CRL Constant sensor voltage excitation Adjustable gain with range switch and 10 turn potentiometer, located ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining