JAKSA NC solenoid valves

Pressure: 0 bar - 10 bar
DN: 2 mm
Voltage: 230, 12 V

2/2 VALVES FOR GAS CYLINDERS Models PL3/PL10 TECHNICAL DATA Internal parts: stainless steel Seals: NBR Fluid temperature: -10°C to +60°C Ambient temperature: max +50°C Voltage: 230, 115, 48, 24 V AC / 24, 12 ...

Pressure: 0 mbar - 500 mbar
DN: 12 mm - 50 mm
Voltage: 200, 230 V

... GAS LINE SHUTOFF VALVES NC *Connected to 230VAC through plug with built-in rectifier (included). Low-noise design for applications that require very quiet operation. Valves are ...

Temperature: -10 °C - 100 °C
Pressure: 10 bar - 1,000 bar
DN: 0.25 in

1000 BAR MAX SOLENOID VALVES NOTES: *80 W pull / 4 W hold PEEK is a non-elastic sealing material, a slight leakage on valve seat can be expected at low fluid pressure. OPTIONS: Other ...

Pressure: 10 bar - 500 bar
DN: 5 mm - 8.5 mm
Voltage: 200, 24 V

... DISPENSING AND SIMILAR USE SOLENOID VALVES PEEK is a non-elastic sealing material, therefore a slight leakage on valve seat can be expected at low fluid pressure. OPTIONS: Other ...

Pressure: 0 bar - 35 bar
DN: 0.125 in
Voltage: 24 V - 230 V

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Voltage: 230, 115, 48, 24 ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 15 bar
DN: 0.25, 0.125 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 75 bar
DN: 0.25, 0.125 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 35 bar
DN: 0.125, 0.25 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 10 bar
DN: 0.25, 0.125 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...

Temperature: -10 °C - 130 °C
Pressure: 0 bar - 8 bar
DN: 0.25, 0.375 in

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Fluid temperature: -10°C to +90°C (NBR); +130°C (EPDM, FPM, PTFE) Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms ...