- Environment - Health - Safety >
- Air Treatment and Noise Management >
- Fan >
- ORIENTAL MOTOR
ORIENTAL MOTOR fans
Air flow: 21,000 m³/h
Noise level: 64 dB
... premium propeller fan group in stainless steel AISI-304, blind overpressure and IE2 three-phase motor with IP-55 protection. The tether anchors on the roof are designed to suit all kinds of inclination. The supply ...
MET MANN
Air flow: 20.7 m³/h - 36.7 m³/h
Noise level: 64 dB
This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Air flow from 21,000 m3/h to 39,800 m3/h - Structure and overpressure ...
MET MANN
Air flow: 7,200, 5,500, 3,600 m³/h
Ceiling fans with DT protection casing can be used to recover the stratified heat on the roof in winter, using the fan in winter allows us to save energy up to 30%. Its use can be commercial and / or ...
MET MANN
Air flow: 150 m³/h - 4,900 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LSFG and MSFG with forward curving impeller is used for extraction within the industry or for comfort ventilation, depending on the variant. The fan is made of 100% galvanized ...
Geovent
Air flow: 250 m³/h - 24,100 m³/h
Rotational speed: 1,400 rpm - 2,800 rpm
GEOVENT centrifugal fan LEX and MEX with closed backward curving B-wheel and directly driven flange motor. The fan is used for extraction within the industry or for comfort ventilation. The fan ...
Geovent
Air flow: 25 m³/h - 6,720 m³/h
Rotational speed: 920 rpm - 2,800 rpm
GEOVENT Plastic Fans type RPV, LPV and MPV is a serie of acid proof plastic, designed for for extraction of gases and fumes from highly corrosive processes. For instance lab fume hoods, battery rooms, washers and chemical ...
Geovent
Air flow: 0 m³/h - 31,908 m³/h
Diameter: 630 mm - 1,000 mm
Rotational speed: 0 rpm - 1,100 rpm
... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes ...
Zhongshan EBS Technology Co., Ltd.
Air flow: 0 m³/h - 17,933 m³/h
Diameter: 350 mm - 630 mm
Rotational speed: 0 rpm - 1,785 rpm
... simulation technology, reasonably designed flow runner combined with ultra-efficient motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and makes ...
Zhongshan EBS Technology Co., Ltd.
Air flow: 0 m³/h - 20,710 m³/h
Diameter: 250 mm - 560 mm
Rotational speed: 0 rpm - 3,920 rpm
... simulation technology, reasonably designed flow runner combined with ultra-efficient EC motor create the high efficiency of the fan. [ Low Noise ] The designer closely combines aerodynamics and sound source, and ...
Zhongshan EBS Technology Co., Ltd.
Air flow: 13,600 m³/h - 72,400 m³/h
Diameter: 660 mm - 1,752 mm
Noise level: 65 dB - 74 dB
... closed environments Technical features of axial air extractors MTV G: - Very high air flow - 6-blade stainless steel fans - System for easy disassembly of the engine - Venturi mouthpiece in moplen - Patented ...
Air flow: 208 m³/h
Diameter: 60 mm
Rotational speed: 2,540 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 240 m³/h
Diameter: 60 mm
Rotational speed: 2,350 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 280 m³/h
Diameter: 60 mm
Rotational speed: 2,200 rpm
The TTG series consists of small tangential fans that are used where a high volume of air and low noise in a limited space is required. The fans are equipped with a ø60 mm fan, length ...
TECSYSTEM srl
Air flow: 2,500 m³/h
Noise level: 72 dB
• The JustAir Fan Turbine is the ideal solution for getting exhaust fumes outside from difficult-to-reach places while saving on space. It wins people over thanks to its low headroom design and low weight. The fan ...
Air flow: 3,180 m³/h - 44,430 m³/h
Diameter: 470 mm - 1,340 mm
Rotational speed: 385 rpm - 1,460 rpm
K and AC air circulators are available in different versions, with diameters ranging from 18" to 53". Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion resistance. ...
Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm
K air extractors are available in several versions, with diameters ranging from 26" to 56", direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel ...
Air flow: 1,200 m³/h - 1,200 m³/h
Rotational speed: 600 rpm - 1,300 rpm
DFB 16 Professional fans – battery powered This quiet running, battery powered fan is light and compact and can be used in public places like restaurants, bars, at events, workshops, as well as ...
Dantherm Group
Air flow: 2,200 m³/h - 19,200 m³/h
The highly durable Master mobile ventilators with high air flow are designed to support drying, heating and cooling equipment. It can be used in rooms to provide improved ventilation, air circulation and to dry moist areas. Available ...
Dantherm Group
Air flow: 2,600 m³/h
Master CD 5000 ventilator 2 600 m3/h Master portable ventilators support drying, heating and cooling equipment. Such devices can be used in rooms that need improved ventilation and air circulation, as well as help in drying moist areas. Available ...
Dantherm Group
Air flow: 0 m³/h - 18,000 m³/h
Diameter: 18 in
... each fan component – the casing, the impeller and motor – enables us to create fans that perfectly meet the requirements of high performances and low power consumptions.The wide range of different versions ...
Nicotra Gebhardt
Diameter: 200, 160, 125 mm
... Mounting The P-Max fans fit the different extractors in the following ways; 1. The wall bracket directly: Flexi Extractor Arms, Pro-Flex PRSV and Super-Max SMSV. 2. Together with Fan Bracket ...
Air flow: 1,300, 2,100, 3,000, 4,600 m³/h
The Plymoth V-Max central fans are designed specially for smoke. gas and lighter dust. Our fans are made of heavy steel plate and come complete with stands for mounting on floors, walls or ceilings. Energy ...
Mobile Fan for Smoke, Gases and lighter Dust Mobi-Fan is a powerful ventilator, which is easy to bring with you on service, repair and other temporary work. Perfect for extracting welding fumes, gases, ...
Air flow: 975 m³/h - 57,825 m³/h
Diameter: 10 mm - 19 mm
Rotational speed: 735 rpm - 2,920 rpm
... industrial fan with forward-bladed impeller. For high flow rates of clean or slightly dusty air, fumes and vapors. Maximum air temperature: 60°C;with cooling fan 300°C. Special constructions on request. ...
CORAL
Air flow: 147.5 m³/h - 925 m³/h
Rotational speed: 2,760 rpm - 2,910 rpm
Centrifugal fan with forward curved blades or open blades for low flow rates and medium and high heads. Suitable for exhaust gas, flue gas and granular material suction. Direct-coupled execution only. Maximum air temperature: ...
CORAL
Ducted helical fan with nylon-glass impeller and alternatively cast aluminum impeller. Suitable for moving large volumes of air at low pressure even in the presence of dust or fumes. Maximum air temperature: 60°C. Special ...
CORAL
Air flow: 250 m³/h - 3,000 m³/h
The J series of exhaust fans is especially engineered for use in ATEX categorized zones. The fans are manufactured in diverse versions, each optimized for use in zones with dust-prone environs or dust ...
Air flow: 250 m³/h - 3,000 m³/h
Centrifugal exhaust-fans are intended particularly for source - capture and are completely adaptable to the EP Series arm line or with the EG and EK arm series by utilizing an adapter flange. These fans ...
Air flow: 120 l/min
Diameter: 24 mm
Rotational speed: 26,000 rpm
Tube fan with high airflow, economic motor and integrated power electronic. Compared to a flat fan, the Micronel D-Line offers much higher pressure and still high volume flow at the same time. Typical ...
Micronel
Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm
The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...
Micronel
Air flow: 100 m³/h - 450 m³/h
Rotational speed: 2,900, 1,450 rpm
Noise level: 45 dB - 67 dB
Produced completely by injection moulding.Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 500 m³/h - 1,600 m³/h
Rotational speed: 1,450, 950, 2,900 rpm
Noise level: 57, 45, 70 dB
Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically and dynamically balanced, incorporating ...
PLASTIFER
Air flow: 720 m³/h - 2,000 m³/h
Extract Fan Low Pressure Produced completely by injection moulding. Polypropylene housing resistant to UV rays and adjustable to 8 positions. High-performance polypropylene impeller with forward curved blades, statically ...
PLASTIFER
Air flow: 24 m³/h - 630 m³/h
It’s recommended an air flow from the outside towards the inside of the cabinet. The slight pressurization prevents the entrance of dust from any other openings in the closet.
Alfa Electric
Air flow: 2,700, 3,850 m³/h
Portable extraction fan for welding fumes The portable FACILE extraction fan is particularly suited to protecting the operator from fumes and particulate when working in positions which cannot be reached ...
AERSERVICE EQUIPMENTS SRL
Air flow: 100 m³/h - 19,000 m³/h
Centrifugal fans with forward curved blades in galvanised sheet metal Extraction of air which is clean or with a low volume of particulates, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction ...
AERSERVICE EQUIPMENTS SRL
Centrifugal fan with forward curved blades in galvanised sheet metal Extraction of air with a low volumes of particulate, exhaust gases, welding fumes, etc. - Structure: The structure of the extraction fan ...
AERSERVICE EQUIPMENTS SRL
Choose the right fan adapted to your installation and filters. Description An efficient filtering system needs to use the right fan adapted to your installation. Airflow, velocity, power, noise level ...
Coral
Air flow: 100 m³/h - 13,000 m³/h
Metal sheet steel fan complete with inlet and outlet flanges
EXHAUST FILTER/fan module according to NFX 15-211 norm ( Filter not included )
External fan units for asynchronous and direct current motors above size 63 • High volume flow though flow-optimised design • Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) • ...
External fan units for servo motors • High volume flow though flow-optimised design • Small number of versions thanks to multi-voltage design 230V (single-phase) to 575V (three-phase) • Various connection possibilities, ...
Built-in axial fans up to 300 mm diameter • Multifunctional use industrial fan /axial fan • High volume flow • Small number of versions thanks to multi-voltage design 230 V (single-phase) ...
Air flow: 15,000 m³/h
Diameter: 1,420 mm
Noise level: 52 dB
Ceiling fans for reducing energy costs by activating lost ceiling heat in high-ceilinged halls Thermal dynamic pushes heat upward. Result: Unused quantities of heat dam up near the ceiling. With the REMKO DVL 140 ceiling ...
Air flow: 1,200 m³/h - 2,600 m³/h
... combination of dehumidifiers and turbo fans. The units of the RTV series can be adjusted in three different mounting angles (0°, 45°, and 90°). Compact, powerful and energy-efficient High motor output High pressure 2 ...
Air flow: 1,350 m³/h - 2,900 m³/h
Noise level: 68 dB
... 35 high-performance fan. Through the use of additional fans, the evaporation is accelerated, whereby the drying process can be reduced by up to 50%. Compact, powerful and energy-efficient High motor ...
... wide range of applications from custom-designed, heavy-duty fans for use in locomotives and off-highway vehicles to standardised, light duty commercial air handling fans. We make OEM axial fans ...
Howden BC Compressors
Centrifugal fans store significant amounts of energy when running, and if the fan is not correctly matched with the operating conditions the consequences for the plant operator can include excessive power ...
Howden BC Compressors
... Howden SX fan's acoustic output is up to 20 dB(A) lower than comparable conventional cooling fans and in many cases eliminates the need for expensive and bulky sound attenuation equipment. The blades ...
Howden BC Compressors
Air flow: 4,000 m³/h - 14,000 m³/h
S.PLUS
... extreme climates. Transport fans for transporting all types of non-fibrous particles, and especially dust, sawdust and wood shavings for activities involving wood, plastics, recyclable waste. Advantages: • Our ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining