The TS8300 is professional digital media converter with multiple inputs and outputs, and it can receive, process and distribute diferente signal sources such as: digital audio and video over IP, ASI or RF; digital data ...
Tecsys do Brasil Industrial Ltda
... on the firmware version, the converter may work as (some examples): * Modbus to IEC 61850 protocol converter * MQTT to IEC 61850 protocol converter * Modbus to DNP3 protocol converter * ...
Features DIN Rail or Panel Mounted compact Protocol Converter DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave) Allows ...
Renu Electronics Pvt. Ltd.
... Moreover, the action of the converter may be reversed at the site. In the reverse acting, the output is the opposite of the direct acting mode; for 4...20 mAinput, the output will be 15...3 psig. Since the Series ITP215converter ...
APPLICATION Instrument for conversion of a standard direct current signal into a standard pneumatic signal, for the change-over from electrical controllers to pneumatic control valves, or from electrical measuring System to pneumatic ...
Valcom
Antaira Technologies’ EVC-3101 is an Ethernet-over-VDSL2 converter with high performance. It is designed based on two core networking technologies: Ethernet and VDSL2 (Very-high-data-rate Digital Subscriber Line 2). The ...
Antaira Technologies
The T610_C is a built-in module for interfacing Modbus or HART transmitters to a FOUNDATION Fieldbus network There are options for using RS485, RS232 or pure CMOS UART communication. Fint provides drivers with HART Master or Modbus ...
Fieldbus International as
Used for the height control in of Plasma Cutting machines It converts arc voltage to frequency It can be interfaced with the peripheral units of the Z32 CNC with a 5V TTL Line Drive optical transducer It introduces a ...
The A4403 is a buck converter that uses valley current-mode control. This control scheme allows very short switch on-times to be achieved, making it ideal for applications that require high switching frequencies combined ...
Charge Converter Facilitates vibration measurement with charge output type accelerometer. Compact relay type charge amplifier with CCLD (Constant Current Linear Drive)support
The PROFIBUS fiber optic converters of the OPTIrep series are used for connecting PROFIBUS segments via fiber optic cables with a distance up to 30 km. The system can be used for line structures as well as for redundant ...
The core of the NLIR technology is the wavelength conversion module that upconverts mid-infrared wavelengths to near-visible, enabling the use of Si and GaAs detectors. Read more about how the conversion works in “Technology”. Accepted ...
The ERIS-100 device is a fibre-optic Ethernet converter with a switch function that enables Ethernet networks to be connected in a point-to-point topology using two devices of the same type or two independent packet networks ...
BITSTREAM S.A.
GLSUN OTS3000-OEO Optical Electrical Optical Converter (OEO Converter) enables the optical signal be regenerated and amplified to realize SM and MM interconversion, OEO amplification with the principle ...
Operating Mode: - 10/100/1000Base-T to Fiber Ethernet Interface: - Shielded RJ-45 Fiber Interface: - SC Connector Std. (LC option) Transmission Distance: - See distance chart System Wavelength: - 850, 1310 nm or 1550 nm Data ...
S.I. Tech, Inc.
The DA Converter is designed to convert digital frequency output signals of our flow sensors into analogue signals. Key characteristics: Output signal (voltage): 0 - 5 Volt, 0 - 10 Volt Output signal (current): ...
• Compact HDMI 1.4 to SDI converter • HDMI loop out • HDMI extender input (RJ45) • Passes 4 channels of HDMI audio • Built-in interlacer (1080P to 1080i) • Built-in multi-format test patterns • 2 SDI outputs ...
Apantac LLC.
The IS-DG102-F Series rugged Gigabit Ethernet to fiber Industrial media converters are designed for where critical but space-limited applications. The IS-DG102-F Series can be powered by a wide range of DC inputs by an ...
ISON Technology Co., Ltd.
... Functions The GCAN-205 converter is a standard Modbus Slave station. It will load the data received on CAN bus into the register (address) and wait for the instructions sent by Modbus Master station to read. When the ...
Shenyang Vhandy Technology Co.
The UIM2501 RS232-CAN Converting Controller is used in conjunction with UIM242XX stepper motor controller to provide a RS232 interface on the user side and a CAN bus interface on the motor side (factory side). With the UIM2501, user ...
The RFT-4200 series frequency converter gives you more flexibility with complete control over the input frequency and bandwidth to get the best results out of digitizers, signal records and other equipment. Additionally, ...
MERCURY SYSTEMS
Features • Transmits analogue and digital signals simultaneously • DC to 12.5 MHz analogue bandwidth • Two input ranges, +/-1 V and +/-5 V • Analogue signal digitised to 12 bit precision • Four independent digital channels • DC ...
Scitec Instruments
The FM-1D/K is a µP-controlled, frequency-to-current converter and flow rate indicator. It converts input pulses to an analog current signal proportional to the instantaneous flow rate. Equipped with a numerical display ...
... output filter 6dB/oct. TRANSFORMED. FREQUENCY BECOMES VOLTAGE. Ideal for rotation measurement: The frequency/voltage converter measures frequencies and converts them into a proportional voltage signal, which is then ...
CANvert - CAN signal converter Flexible bi-directional conversion of CAN messages to discrete signals: 8 digital outputs, 4 highside, 4 lowside, 1 channel each PWM-capable, 2 analog inputs WakeUp-capable ...
Please specify:
Help us improve:
remaining