DN: 15 mm - 1,000 mm
Pressure: 16 bar - 420 bar
... ball valve with full range of control applications is available with superior flow control. These 1/4-turn control ball valves are more compact, lighter weight and much less expensive ...
Athena Engineering S.r.l.
DN: 50 mm - 600 mm
Pressure: 16 bar - 420 bar
... short pattern to satisfy the different installation requirements. This compact one body design reduces the weight and requires space compared with installing two conventional valves when it achieves safer ...
Athena Engineering S.r.l.
DN: 20 mm - 300 mm
Pressure: 16 bar - 420 bar
Single-seated Control Valve body material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel end connection: operation:the PDL series pneumatic diaphragm actuator, PCL series pneumatic piston actuator, electric ...
Athena Engineering S.r.l.
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... > Materials of Construction: Aluminium, Nitrile, Brass, Polymer * * Features Cartridge Type design for Long life - & Compact design - Lubrication not essential The head can rotate 180 - $ 20 Lacs Cycle tested
UFLOW AUTOMATION
DN: 0.25 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... designLubrication not essentialThe head can rotate 18020 Lacs Cycle tested * * Features Cartridge Type design for Long life Compact design Lubrication not essential The head can rotate 180 20 Lacs Cycle tested
UFLOW AUTOMATION
DN: 0.25, 0.125 in
Pressure: 0 bar - 10 bar
Temperature: 5 °C - 60 °C
... designLubrication not essentialThe head can rotate 18020 Lacs Cycle tested * * Features Cartridge Type design for Long life - & Compact design - ÿ Lubrication not essential The head can rotate 180 - $ 20 Lacs Cycle tested
UFLOW AUTOMATION
Pressure: 0 psi - 29 psi
Temperature: 5 °C - 60 °C
• Compact series lineup that is perfect for small flow volume control of chemicals. Differential screw flow rate adjustment option can be selected for micro flow rate adjustment.
... ] orifice diameter, internal pilot type chemical 2-3 port valve that does not transmit heat to fluid. Up to two air-operated valves can be controlled simultaneously by a single solenoid valve. ...
DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C
Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN ...
Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C
DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C
... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...
DN: 3, 4, 6 in
Pressure: 14.2 psi - 170.6 psi
Temperature: -15 °C - 80 °C
... Control Pressure Reducing Valve reduces pressure of inlet flow into desired outlet pressure. Pressure Reducing Valve can prevent damage within pipelines due to high pressure. Unique piston design to exclude ...
DN: 1.5, 1.25, 1, 2 in
Pressure: 300 psi
Temperature: -10 °C - 120 °C
The UL Listed Test and Drain Valve, also known as Test Valve or Fire Sprinkler Drain Valve, is a type of valve with both a test function and a quick drain function. An ...
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
The HAT/FP is a reliable and automatic freeze protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent ...
Thermomegatech
DN: 0.5, 0.75 in
Pressure: 10.3, 6.9 bar
Temperature: 149 °C
... Protection Valve is installed into the lowest point within the heated system. The thermal actuator is tee’d into the NPT threaded opening with adequate internal clearance to monitor the water temperature. When the water ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
DN: 0.25 mm
Pressure: 10 bar
Temperature: -20 °C - 80 °C
... ball valve - Ball bore: borehole through the middle, DN 4 mm wide - Connections: 2 x G 1/4" i - Front-panel mounting - Corrosion-resistant - High level of gas tightness - Material of sample-contacting parts: PVDF, Viton® The ...
DN: 0.25 mm
Pressure: 4 bar
Temperature: 80 °C
... according to the application-specific requirements. Using the compact fine adjustment M&C RV 11-… needle valves, this is possible in a reliable and exact manner thanks to the optimum design of the valve ...
DN: 0.125 in
Pressure: 60, 100 psi
Temperature: -18 °C - 49 °C
Manifold sample valve assures continuously flowing, contemporary samples in conjunction with the Sentry Sample Sequencer 5. The unique manifold design provides flow in two directions from the open valve, ...
Sentry Equipment
DN: 10 mm - 50 mm
Temperature: 0 °C - 50 °C
• Compact ball valve in PVC-U • Ideal for tank or tank outlet • Gluing or threaded ends • We design valves tailored to the client’s needs Advantage Maximum safety with body and ...
DN: 300 mm - 600 mm
Pressure: 16, 19 bar
BF 31 BF31 butterfly valves are interception devices for average/low pressure gas pipelines. They may be used also for intercepting liquids when a hermetic seal, low pressure losses and compact construction ...
DN: 50 mm - 250 mm
Pressure: 16, 19 bar
Temperature: -10 °C - 150 °C
GAS VALVES BF 32 BF32 butterfly valves are interception devices for average/low pressure gas pipelines. They may be used also for intercepting liquids when a hermetic seal, low pressure losses and ...
DN: 1 in - 2 in
Pressure: 18.9 bar
Temperature: -10 °C - 60 °C
... Dilock is a safety device that quickly interrupts the gas flow should? the controlled pressure reach the intervention set valve due to any malfunction. Special suitable for natural gas, LPG and non-corrosive gas. Main ...
DN: 25 mm - 150 mm
Pressure: 10 bar
... health-hygiene applications, this valve means a reduction in the number of single seat valves required and consequently optimizes the use of available installation space. The valve bodies ...
BARDIANI VALVOLE S.p.a.
DN: 0.125 in - 0.25 in
Pressure: 7 psi - 135 psi
Temperature: -20 °C - 70 °C
1、Delicate and compact structure; 2、Available to exhaust and cut off flow, sensitive in adjustment, high precision; 3、Install in several positions to facilitate installation and application.
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard ...
NOSHOK
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
A winning team: compact, robust steam trap with no loss of steam, combined with all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop ...
Pressure: 0 psi - 125 psi
Temperature: -29 °C - 149 °C
... venting the downstream pressure to atmosphere when in the off position. These valves are compact in size and can be utilized for in-line and panel mount applications. Valves can be ordered ...
DN: 10 mm - 50 mm
Pressure: 4.5, 6 bar
... operated pinch valves can also be offered with alternative individually customised connections. Structure of VMP series The structure of the VMP series air operated pinch valves encompasses the sleeve, ...
AKO ARMATUREN
DN: 10 mm - 50 mm
Pressure: 6 bar
... the VM series pneumatic pinch valves can also be offered with alternative individually customised connections. For information on advantages of AKO pinch valves and their functions, see air operated ...
AKO ARMATUREN
DN: 10 mm - 150 mm
Pressure: 6 bar
... Structure of Pinch Valve with tri-clamp The structure of the VMC series air operated pinch valves encompasses the sleeve a body and two collar caps. The pinch valve sleeve is positioned ...
AKO ARMATUREN
DN: 0.25 in - 4 in
Three horizontal ports. Minimized dead legs, compact in space for easier installation and safer operation in constrained spaces. Variety of ball configurations for different flow patterns in both automatic and manual ...
HABONIM
DN: 0.5 in - 4 in
Four horizontal ports. Minimized dead legs, compact in space for easier installation and safer operation in constrained spaces. Variety of ball configurations for different flow patterns in both automatic and manual ...
HABONIM
DN: 0.25 in - 0.5 in
Double Block & Blead (DB&B) / Dual-Safe valve optimal design. Casted body for optimized cost affectivity. Incorporates two main isolation valves and one bleed valve in a single body ...
HABONIM
- Regulating valve, Elbow regulating valve - Fine regulating valve, Elbow fine regulating valve - Taper seat non-return valve - Needle valve - ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
A-BV1-F One-piece housing, short body, open passage, with flange connection to EN 1092-1 PN16, with flange for actuators to DIN / ISO 5211 Housing and ball made of 1.4408. Sealing material PTFE / glass fibre 15%. Temperature range -50 ° C to 200 ° C
DN: 10, 8, 15, 12, 6 mm
Pressure: 100 bar
A-BVM Mini-Compact Ball Valve with compression ends to EN ISO 8434-1 (DIN 2353) Housing made of 1.4571, ball of 1.4408. Seal material PTFE. O-ring material NBR, Viton on request
DN: 25 mm - 500 mm
Temperature: -273 °C - 450 °C
... synchronized with the safety valves -Complete, coordinated combination of one supplier with qualified resistance coefficients Bursting discs with safety valves in combination -Tight up to the set ...
DN: 15 mm - 50 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
The pinch valves from Ross has a compact and economical design that is utilized for a broad range of applications in the industrial automation industries. It is ideally used for compressed air and other ...
ROSS EUROPA
DN: 50 mm - 80 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01): Aluminum alloy. Threaded cap (03): POM (polyoxymethylene). O-Ring (06): NBR (nitrile rubber). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Female threads, DIN ...
ROSS EUROPA
DN: 40, 32 mm
Pressure: 4 bar
Temperature: -20 °C - 80 °C
MAIN VALVE Housing (01), Flange (04): POM(polyoxymethylene). Screw (07): galvanized steel. Sleeve (08): see material selection. Port: Flange, (DIN PN 10/16). Ambient temperature: -20° to +50°C. Media temperature: ...
ROSS EUROPA
Temperature: 180, 260 °C
The most reliable and durable valve Our patented compact Purged Lip Sealing Valve (PLSV) is a disruptive analytical valve that offers the best of both worlds: a longer ...
The compact and well-proportioned silhouette of both the seats and the small sofa, opens up to a new way of using the dining space: as a living room within the living room, a hybrid situation. The ...
DN: 12 mm - 15 mm
Pressure: 6 bar
compact design with high flow capacities integrated lift limitation visual position indicator ideal for realising switching functions in restricted installation spaces
DN: 15 mm - 32 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C
compact piston drive medium pressure of up to 10 bar with EPDM and medium pressure of up to 6 bar with PTFE (EPDM) visual position indicator NC, NO, DA NAMUR-compliant air connections resistant to contaminated medium market ...
Please specify:
Help us improve:
remaining