- Hydraulics - Pneumatics >
- Pump >
- Transfer pump >
- Watson
Watson transfer pumps
Flow: 1.2 m³/h - 55 m³/h
Pressure: 10, 5 bar
Fluid temperature: 150 °C
... Eccentric Disc Pumps have been known for their reliability, durability and cost effectiveness, earning a reputation as the ideal pumping technology for some of the harshest applications in the world. With thousands operating ...
MOUVEX
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, safety and product containment. ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... product containment. The result is a pump that delivers very high suction and discharge pressures that allow it to self-prime and fully maximize product containment. SLC Series pumps are ideally suited ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control ...
Albin Pump
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable for Thermal oil heat transfer: OEM systems, ...
Flow: 0 m³/h - 48 m³/h
Pressure: 0 bar - 7 bar
Fluid temperature: 120 °C
... multipurpose peripheral flow AODD pump The TopAir series is one of the most complete lines of Air Operated Double Diaphragm pumps on the market. With eight sizes up to 800 l/min in a wide range of ...
Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C
The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 0.5, 0.8, 16 bar
Fluid temperature: 250 °C
For refinery and petrochemical applications Petrochemical Duty PD are internal gear pumps designed for refinery and petrochemical applications, all pressure-containing components are carbon steel. Design pressure according ...
DESMI Pumping Technology A/S
Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m
... shaft seal chamber with cooling fins located away from main pump casing to protect shaft seals from heat transfer. • Back pull design without disturbing pump casings and external pipes ...
DESMI Pumping Technology A/S
Flow: 4.8 m³/h
Head: 9 m
Power: 0.18 kW
Ideal for the transfer of fluids loaded with particules, the plastic design guarantees an excellent chemical compatibility. Easy integration The mechanical seal allows a small footprint. Excellent ...
Siebec
Flow: 10 m³/h
Power: 0.75 kW
Fluid temperature: 110, 80 °C
Ideal for the transfer of fluids loaded with particules, the plastic design guarantees an excellent chemical compatibility. Easy integration The mechanical seal allows a small footprint. Excellent ...
Siebec
Flow: 14 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C
Ideal for the transfer of fluids loaded with particules, the plastic design guarantees an excellent chemical compatibility. Easy integration The mechanical seal allows a small footprint. Excellent ...
Siebec
Flow: 6 m³/h - 66 m³/h
Pressure: 0 bar - 8 bar
Head: 5.1 m - 17.5 m
Centrifugal pump with open impeller in AISI 304 stainless steel made by hydroforming. The radial flow impeller also makes it suitable for pumping liquids that are not completely clean but with solid parts up to 19 mm ...
Flow: 0.17 l/min
Pressure: 6 bar
Power: 7.32, 8.4 W
KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral or corrosive. ...
KNF NEUBERGER
Flow: 0.00001 l/min - 0.00081 l/min
The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are ...
Flow: 0.002 l/min - 0.00406 l/min
This model has a flow rate of 2.0 — 4,056 ml/min and is designed for operation with single-channel pump heads. The analog interface makes it possible that all functions can be controlled externally. A control accuracy ...
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...
SAMOA Industrial, S.A.
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...
SAMOA Industrial, S.A.
Flow: 0 us gal/min - 45,000 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
2000 pumps set the standard in positive displacement pumping applications. The proprietary 2000 gear-type universal joint design effectively handles radial and thrust loads for maximum performance and long life. These ...
NOV Inc.
Flow: 0 us gal/min - 4,500 us gal/min
Pressure: 0 psi - 1,500 psi
Fluid temperature: 14 °F - 230 °F
The 2000 HS System combines high pump efficiency with low discharge pressure to provide unmatched performance in high solids sludge cake transfer. Compared to hydraulically driven, piston ram type pumps ...
NOV Inc.
Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 12 bar
Fluid temperature: -10 °C - 100 °C
For the newest iteration of our EZstrip™ maintain-in-place progressing cavity pump we designed new features to make maintenance even more user friendly than before. In addition to our patented split suction chamber we’ve ...
NOV Inc.
Flow: 0.5 l/min - 5.7 l/min
Pressure: 0 bar - 120 bar
Power: 0.06 kW - 1.46 kW
... decisive for the quality of the end product. The KF 0 stainless steel gear pump is particularly suitable for these applications. The KF 0 stainless steel is an external gear pump with flow rates of 1 ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -40 °C - 200 °C
KF series gear pumps are external gear pumps that operate according to the positive displacement principle. Here, the fluid is transported from the suction to the discharge end by rotation of the two ...
KRACHT GmbH
Flow: 1.8 l/min - 713 l/min
Pressure: 0 bar - 25 bar
Fluid temperature: -10 °C - 150 °C
... components. The KF-F fuel pumps are durable up to a WSD value of 520 µm, which is the minimum lubricity of MGO and DMA according to ISO 8217. Furthermore, the pumps exhibit extremely good efficiency, ...
KRACHT GmbH
Flow: 0 l/h - 189 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW
... to the “S” family. This range of industrial pumps are simple to operate and excel in heavy duty applications, where high viscosity mediums are being pumped. This peristaltic range of tube pumps offers ...
Verder Liquids
Flow: 0 l/h - 470 l/h
Pressure: 0 bar - 2 bar
Power: 0.18 kW
... operate industrial tube pumps that are perfect for heavy duty applications, where viscous mediums are being pumped. These industrial peristaltic tube pumps have a compact footprint, ...
Verder Liquids
Flow: 0 l/min - 0.78 l/min
Pressure: 0 bar - 2 bar
... tube pumps offer highly accurate, repeatable dosing, for low to medium flow. They are ideally suited for pharmaceutical and laboratory applications.This simple to use, compact pump, ...
Verder Liquids
Flow: 700, 500, 600 l/min
Head: 24 m - 37 m
Power: 1.5 kW - 4 kW
... . Water supply, spray or flowing irrigation, autoclave feed, high pressure system and any other general service requiring transfer of clean liquids. LIMITS OF USE - Total suction lift up to 7 mt. - Continuous duty ENGINE - ...
Speroni
Flow: 400 l/min - 450 l/min
Head: 22 m - 57.5 m
Power: 1.1 W - 5.5 W
... . Water supply, spray or flowing irrigation, autoclave feed, high pressure system and any other general service requiring transfer of clean liquids. LIMITS OF USE - Total suction lift up to 7 mt. - Continuous duty ENGINE - ...
Speroni
Flow: 450, 600 l/min
Head: 25.5 mm - 90.5 mm
Power: 1.5 kW - 15 kW
Centrifugal, monoblock and single-impeller electrical pumps with pump body, with connection to the motor by means of a support unit. With flanged inlet and delivery openings (PN 10 ) and threaded counter-flanges. ...
Speroni
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid transfer The wall ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.004 l/min - 0.041 l/min
Power: 5 W
Length: 132 mm
... adjustment # Easy maintenance # No pollution # High repeatability ★ High precision, low noise ★ Suitable for transfer of viscous and non-viscous liquids ★ Compact structure and free maintenance
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm
SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... application: pressure supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 b Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar - 280 Nlpm SPECIFICATIONS: Lower ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 B Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar - 280 N.l.p.m. SPECIFICHE: Lower ...
Airmation ECP srl
Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C
Centrifugal Brushless DC 24V 12V Mini Water Pump Specification: voltage:12v or 24v flow rate: 7L/min 9L/min 12L/min water head:3M 5M 8M Feature: ◇Advanced magnetic driving technology for static-seal,without ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 23, 25 l/min
Pressure: 20 bar
Head: 5 m
... over 28V, the pump will auto-protect and shut off own power supply, when the voltage falls below 28V, the pump will restart automatically. Application: Home Beer Brewing Hot Water Circulation Beverage ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0 l/min - 3 l/min
Head: 6 m
Weight: 900 g
... for either vacuum operation, liquid transfer, or alternating operations.The innovative, compact design incorporates leading edge technologies that allow it to operate harder, quieter ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Argal Pumps
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...
Argal Pumps
Flow: 1,100, 1,280 l/min
Pressure: 8 bar
Head: 4.5, 6 m
The entire construction of the pump (body and air distributor) is made of AISI 316l making the MISTRAL series extremely resistant to corrosion, guaranteeing at the same time a robust and solid solution for continuous ...
Argal Pumps
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg
Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 18 kg
Professional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 21, 120 l/min
Pressure: 7 bar
Weight: 12 kg
rofessional pneumatic pumps for low pressure finishing spray, assembled and tested to reach all sector applications needs: they guarantee high performance and a long cycle of use. The powerful low pressure spray units, ...
LARIUS SRL
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 20 l/min
... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...
Bürkle
Flow: 4 l/min - 30 l/min
... stainless steel 304 cab be easily filled off. Various tube diameters can be individually adjusted to the required transfer volume. These pumps are equipped with a stop switch that allows basic pre-dosaging.
Bürkle
Flow: 56 l/min
Power: 220 W
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • with anti-siphon device • 4 m supply hose as standard • additional hose from 6 to 10 m - ...
Eurial
Flow: 40 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Eurial
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Eurial
Flow: 1 m³/h - 105 m³/h
Pressure: 16 bar
... centrifugal electric pumps engineered by DAB. They are suitable for use in a wide range of applications like water supply, transfer of liquids in agriculture, horticulture, and industries, and implementation ...
Flow: 2.7, 1.3, 2, 0.9 m³/h
Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, ...
Pompes Japy
Flow: 5, 2.7, 1.3, 0.9, 2 m³/h
... Semi-rotary manual pumps equipped with flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, ...
Pompes Japy
Flow: 0.9, 2, 1.3, 2.7 m³/h
Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange ...
Pompes Japy
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating ...
Pressure: 32, 16, 48, 24 bar
Weight: 7.2, 8.1 kg
... sizes With our pneumatically driven piston pumps for transferring oil, you always have a reliable partner on hand. The robust 40 and 82 series have a 2'' bung fitting and are suitable for material transfer ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining