|
|
Feature:
●Integrated D impact device, with no cables
●Wide measuring range in HLD and direct display of converted hardness values in HB,HRB,HRC,HRA,HV,HS
●Test at any angle
●Software calibration and battery indicator
●Upper and lower limit and sound alarm
●Compact device ,Simple handing and low test expenditure
|
|
|
Model HB-3000 Brinell Hardness Tester is the winner of the national quality silver medal prize. It adopts the mechanical changeover switch. Model HB-3000B is equipped with an electrical changeover switch. They can be used to determine the Brinell hardness of unquenched steels, cast iron non-ferrous metals and soft bearing alloys, etc.
|
|
|
Based upon automated indentation diameter detections, not depths, this system accurately calculates and displays Brinell Hardness Values...after test load dwell time...in five seconds or less. It employs a computer, keyboard monitor, and an advanced-design optical system for production testing, report printing and data storage. Will test flats, rounds, and cylindrical parts. Complies completely with ASTM E10, ASTM E4, and ISO 6506.
|
|
|
|
|
|
The King Brinell tester has been the world wide leader for over 60 years. King Brinell hardness testers are lightweight, easy to maneuver and require only one operator which make them ideal for use as portable or bench units.
The King Brinell is designed to make impressions that are used to measure the hardness of metal. The King® Brinell Hardness Tester is a precision instrument which serves a dual purpose. It can be used as a bench-type tester or taken to the job site in almost any location. This dual role enables most users to save a considerable amount of money with their investment with this highly versatile hardness tester. The King Brinell Tester is lightweight and it requires only one person to operate. It is 100 percent reliable with precision accuracy in the field regardless of what challenging environment you may be testing in.
The King Potable Brinell Tester is versatile enough to test virtually any size and shape metal specimen but most importantly this Brinell tester is easy-to-use. The operator simply places the specimen between the anvil and the test head, cranks the test head down onto the specimen, locking the tester in place, closes the pressure release valve, and pulls the hydraulic lever until desired load is reached. The tester applies up to a 3000 kg load on a 10 mm ball, making a lasting impression, which is available for re-reading at any time. A by-pass valve is automatically activated at the calibrated load, eliminating the chance of overloading.
|
|
Proceq has combined the best of Original Schmidt with the most advanced technology to create the new SilverSchmidt concrete test hammer.
The SilverSchmidt offers a virtually maintenance free, lightweight and compact construction.
This next generation tool combines an electronic display and advanced mechanics with true rebound coefficient that automatically converts to compressive strength.
- Measurement inherently independent of impact direction, meaning no directional corrections are necessary
- High measuring accuracy due to differential optical absolute velocity encoder
- Conversion curves for a wide range of compressive concrete strengths, including low fc (<10 N/mm2, 1’450 psi) and high strength concrete (up to 170 N/mm2, 24’650 psi)
- Simple operation with "one-button", combined with advanced tilt and twist technology user interface
- Language independent graphical menu with symbols
- Automatic conversion to the required measurement unit (N/mm2, kg/cm2, psi)
|
|
The Digi-Schmidt concrete test hammer combines Proceq’s classic Original Schmidt with a display unit that allows the direct reading and display of test results.
With the Digi-Schmidt, various parameters such as impact direction, form factor and time factors as well as carbonation depth can easily be set.
The Digi-Schmidt is available in the versions ND and LD.
- Automatic calculation of the compressive strength thanks to the integrated conversion curves
- Storage of customized conversion curves possible
- Large and easy-to-read display
- Data evaluation and storage as well as transmission to a PC with ProVista software are possible
|
|
Concrete testing with the Original Schmidt test hammer is the most frequent used method for non-destructive concrete testing worldwide.
For every demand and specific test application, Proceq offers the right concrete test hammer.
Original Schmidt concrete test hammers are available in models with different impact energies in order to meet the needs to test a wide range of material types and sizes.
Our types N, NR, L and LR are best-suited and specially developed for assessing the quality and compressive strength characteristics of concrete with the range of 10 to 70 N/mm2 (1’450 to 10’152 psi).
Versions incorporating paper chart recorders (LR and NR) can automatically register the rebound values on a paper strip chart.
Proceq’s type ND and LD Digi-Schmidt test hammer measure the rebound values through an electronic method and allows the direct reading of the test results in digital form.
|
|
Indicates the compressive strength of hardened concrete James Instruments, Inc. offers a complete line of Concrete Hardness Testers for the occasional user as well as the engineering professional. All hammers are spring activated and conform to ASTM C-805 as well as other European and Asian Standards. All are made to the most exacting machine tolerances to provide the end user with a consistent test every time.
Digital Rebound Hammer Model W-D-2000
Automatically calculates the hardness rebound numbers and the compressive strength. Complete with digital readout and printer, the unit can store readings for a later upload to a PC.
Manual Test Hammer Model W-M-250
Standard cocnrete hardness tester for the occasional user.
Calibration Anvil Model W-C-7312
For verification of the concrete hardness tester models above.
|
|
|
|
|
|
DynaMIC
The DynaMIC operates according to the rebound hardness testing method (standardized according to ASTM A956) using a special signal processing technique that automatically compensates for changes in testing direction. Position the impact devices and read the hardness value - that is hardness testing in a matter of seconds. Different impact devices are available to ensure an optimum match to material and application. The DynaMIC DL Data Logger model can internally store hardness values along with statistical information.
Products Features:
Measurement of hardness independent of impact direction (without input of any correction values) due to patented signal processing
Standardized according to ASTM A956
Automatic conversion of hardness to HV, HB, HRC, HRB, HS, HL and N/mm2
Different impact devices dependant on application:
Dyna D for standard applications
Dyna G for heavy, solid parts
Dyna E for hardness range beyond 650HV
Data Logger version with internal data memory for measurement data and instrument settings
Applications:
Solid, coarse-grained components
Machine parts made of steel and cast aluminum alloys
Large series parts during production
Heavy forgings
|
|
●Horizontal protrudent nose design, testing on surfaces
difficult to reach
●Testing internal surface of ring parts whose diameter is
not less than 23mm (0.900〃)
●Testing external surface of round bars whose diameter is
not less than 3mm (0.120〃)
●Automatic test process
●High definition backlight LCD
●Simple and easy selectable operation menu
●RS-232/USB data output
|
|
The Rockwell Zwick/ZHR hardness testers cover the following applications:
Classical Rockwell methods: Zwick/ZHR 4150 (preload: 10 kg; test load: 60; 100; 150 kg), scales A B C D E F G H K L M P R S V.
Super-Rockwell methods: Zwick/ZHR 4045 (preload: 3 kg; test load: 15, 30, 45 kg), scales N T W X Y.
Combinations of Rockwell and Super-Rockwell methods: Zwick/ZHR 8150 (preload: 3, 10 kg; test load: 15, 30, 45, 60, 100, 150 kg), scales A B C D E F G H K L M P R S V N T W X Y.
Furthermore the devices are available in different degrees of operator convenience.
|
|
Motorized turret with analogue measurement microscope and easy-to-use integrated hardness calculate
- Motorized turret
- High quality microscope with analogue scale Fully automatic load control
- Easy-to-use operating system Two optical paths
- Built-in high speed thermal printer
- XY stage with minimum reading of 0.01mm
- CV-CCD Video measurement system optional
- Dual indentor (Vickers/Knoop) turret optional
2kg load optional
Typical applications :
- Steels, nonferrous metals, IC wafers, small
- precision components
- Thin plastic, metallic foils, plating, coating,
surface layers, laminated metals
- Effect of heat treatment, case depth analysis,
depth of carburised and flame hardened layers
|
|
|
|
|
|
Wolpert Wilson Instruments is the original manufacturer of a comprehensive range of hardness testers. We cover gobal Sales and Service by an extensive authorised agent network. Wolpert Wilson are part of Instron Corp USA and the larger Test & Measurement Group of companies of ITW USA.
Wolpert's universal Dia Testor Series 700 and 900 are world famous. Specific details of our USA made Wilson hardness testers Series 500, 2000 and 2100 Tukon are also available at the Wilson USA site
Original Shore durometers for plastics and rubber are also manufactured at our Norwood USA plant. For specific product information please click here
Wolpert and Wilson hardness products are predominately used to determine the hardness of metals, alloys, small precision parts, wire and plastics ranging from the softest bearing materials to the hardest steel. Our hardness testers are used extensively in heat treat analysis and by the automotive, aerospace, steel and transportation equipment industries. All our materials testing products conform to international standards under ISO and ASTM and are CE approved
|
|
Micro Hardness Testing Machines
HM-100 series
- Wide range of test forces (4.904 to 19610 mN)
- Capable of a Vickers hardness test for a wide range of materials including resin‚ metal‚ and diamond film
Vickers Hardness Testing Machines
AVK-C0/HV-100 series
- Wide range of test forces (1.961 to 490.3 N)
- Best suited for testing the hardness of heat-treated metal parts and welding‚ and for evaluating the fracture toughness of ceramic material
Auto-Reading Measuring Program
VLPAK2000
- Automatically executes processes from measuring the dimensions of indentations to determining the hardness by interlocking with a testing machine
- Eliminates operator error from the test results
- HM-100 and HV-100 can be mounted.
|
|
The EQUOSTAT Portable Hardness Tester is a light weight, yet powerful portable hardness tester for all metallic materials.
Applications of the EQUOSTAT Portable Hardness Tester include scratch sensitive polished surfaces, hardness of the heat affected zone in weldments, sheet and coiled metals, and pieces as thin as 0.008".
The EQUOSTAT measures in a similar fashion to the Rockwell principle where penetration depth under a defined load force is measured before and after application of a larger force, i.e. the plastic deformation and, therefore, the hardness.
The EQUOSTAT then displays both the native HRZ and converted values for Rockwell, Vickers and Brinell on a large LCD display.
Mobile and accurate, the EQUOSTAT has a large measuring range - from soft to extremely hard and gives measurements in seconds.
Internal data storage of ~6,000 readings and RS-232C interface make the EQUOSTAT a powerful quality tool.
|
|
The Equotip Bambino hardness tester is a simple, economical and easy-to-use portable rebound tester for hardness measurements on most metals.
It combines a light and compact design and an innovative impact device type D to offer an unmatched price/performance ratio.
|
|
Technical Highlights:
– Shore Hardness A, C, D
– Accuracy: 1 % of max
– Mini Statistic Function
Power supply 4 x 1.5V AAA
Battery
Size: L 162 x B 65 x H 38
mm; Weight: 173 g
Typical applications,
to measure the
penetration of
Shore A: rubber, elastomers,
neoprene, silicone, vinyl,
soft plastics, felt, leather and
similar material.
Shore C/0: foam, sponge,
etc.
Shore D: plastics, formica,
epoxies, plexiglass, etc.
Control plate for calibration
included
Data Output to PC
• RS 232C Output included
• Option: Software and cable
to PC
ATC-01: € 80,–
Delivered in a
hard carrying case
Measurement mode:
• Max mode: Holds the maximum
value in the display
• Point mode: Shows one
instant value
• Average mode: Calculates
the average value out of 9
single measurements
Power Management
Auto-Power-Off function
Low-Battery indicator
Standards met by HD serie:
• DIN 53505
• ASTM D2240
• ISO 7619
• JIS K7215
|
|
|
|
|
|
Zwick's hardness testers for optical measurement methods cover different load ranges and offer specifications in different stages of ease of use. Now the most suitable tester is available for each type of application.
Hardness Testing Machine ZHV20/Z2.5
A single solution: This hardness testing machine enables tests according to Vickers, Brinell or Knoop. It has been built by combining the hardness test device for optical methods with a zwicki test machine. The built-in load cell permits test loads between 2 and 200 N to be applied electromechanically. The CCD camera is placed on a microscope angled at 90°. Lenses and mounting unit(s) for the indentor(s) are integrated in the revolver head so that position change between setting and measuring the indentation takes place by rotating the revolver. The revolver head is equipped with four stations, i.e. two indentors and two objective lenses can also be combined.
A testXpert® master test program includes standard tests according to Vickers, Knoop, and Brinell. Add-ons are optionally available for automatic indentation measurement and focusing as well as for hardness sequence tests with manual or motorized compound tables.
|
|
|
|
|
|
ZHU2.5/Z2.5 : The most Universal Hardness Tester of the World
The ZHU2.5/Z2.5 is the most versatile all-round hardness tester the world has ever seen. It is based on a materials testing machine type "zwicki": Simply mount the hardness measurement head. The hardness measurement head is constructed so that it can be used with all Zwick materials testing machines, and for automation. Equipped with other tools or grips, this modular test system is also suitable for tensile, compression and flexure tests.
testXpert® is also utilized as the test software. A cost-optimized supplement has been developed solely for optical hardness test methods.
Integrated in the hardness measurement head are a digital travel measurement system, a load cell and an
interchangeable indentor with measurement transducer.
On the whole the hardness measurement head encompasses all hardness tests with indentation depth measurement, e.g. Universal Hardness HU macro range or Martens hardness HM, Rockwell hardness, ball indentation hardness H, Vickers depth measurement HVT, and Brinell depth measurement HBT.
|
|
This hardness tester comprises the very best in “state of the art” design along with dynamic precision only found at Phase II. The 900-331 Rockwell scale hardness tester is easy to operate, yet engineered to obtain highly sensitive and accurate readings. Conforming to ASTM E-18 Rockwell Hardness standards, the 900-331 tester will offer unmatched repeatability in all standard Rockwell Hardness scales (table shown below). A perfect, rugged performer suited for any environment including heat treat facilities, tool rooms, workshops, laboratories and inspection labs. Lifetime technical support is included on all Phase II Hardness Testers. So test away with confidence and a level of accuracy you will only find at Phase II.
Features:
Direct analog dial reading
Advanced design, easy to operate
Engineered to obtain highly sensitive and accurate readings
Conforms to ASTM E-18
Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
|
|
Simple laboratory measuring instrument for hardness measurements in accordance with the König and Persoz methods described on the previous page.
- Automatic counter with acoustic signal when the deflection is below 3° (König) or 4° (Persoz) respectively
- Registration of pendulum deflection by means of 2 light barriers
- Digital counter
- Changeable from König to Persoz by means of a third light barrier
- Selector switch for display in seconds or number of oscillations
|
|
|
|
|
|
CARACTERISTICS
■ Universal Hardness tester WITH MILLING for Brinell tests
- The load precision is controlled via closed loop load cells
- Machine management through a built-in computer.
■ Selection of loads and automatic test scales from menus; full automatic test cycle.
- The structure is protected against dust and any atmospheric agent as well as against shocks.
- special studied for CASTING AND FORGING HOUSES.
- Brinell and Vickers readings through camera and monitor integrated with high-definition and high-precision electronic measurement.
- Automatic focus with piece presser.
- Print out of the impression image and of the specimen surface; printed on the inspection report with statistic analysis.
- Large data and test storage with file management.
- Built according to the requirements for certification by calibration institutes.
- Perfect and effective measure even at the first test
- Load cell reading at 1000Hz
- Full automatic measurements Brinell, without manual intervention
- Repetibiliry: 0,1 HBW
|
|
Indentation Hardness Tester acc. to Buchholz, Model 263
A steel block with an inserted impression body is applied onto the test surface and produces a pressure mark, the length of which is measured with a microscope. The impression hardness in accordance with Buchholz is established from the length of the impression, using the standard table.
|
|
|
|
|
|
QM-HTDm is a compact easy to use unit designed for checking the hardness, thickness and diameter of samples of tablets regularly taken from a production line. It provides printed results eliminating the need for manual recording of data.
The unit is suitable for use in-booth, sited centrally in a manufacturing area or in a Quality Control Laboratory.
The QM-HTDm is robust and provides consistent accuracy. It can handle a wide variety of tablet shapes and sizes including elliptical tablets where simple change parts ensure accurate location. The user can select to measure hardness in Kp, N or Sc. To ensure safe and accurate calibration CI have designed a dedicated calibration kit.
The QM-HTDm has the ability to store details of over 150 products in a Product Library. Each product can be associated with a test method stored in the Method Library. The method determines the sample size, interval and user defined statistics.
Key Features
- handles different shapes and sizes
- detailed sample printouts
- consistent accuracy
- easy to clean
- stores details of 150 products
- adjustable sample size
- password protection
- selectable hardness units - Kp, N or Sc
|
|
|
|
|
|
Microhardness tester FISCHERSCOPE HM2000 and PICODENTOR HM500
These instruments have been developed according to the latest research results ad are particularly well suited for the following areas of application:
Hard material coatings in general, ultra-thin DLC coatings, dirt-repellent coatings (e.g., sol-gel coatings), coatings for PC hard disks and CDs, very thin lacquer coatings, ion-implanted surfaces, nanocoatings for sensors, implants used in the field of medical technology, matrix effects in alloys, biological materials, ceramic materials.
The design of the micro-hardness instrument combined with the superior evaluation electronics and software allows for a very favorable price/performance ratio. The resolution for applying the test load is about 100 nanonewton and for measuring the indentation depth about 40 picometer.
The maximum test load of the HM500 instrument is 500 mN at a maximum indentation depth of 150 µm. The closed measuring chamber and the active anti-vibration table ensure very accurate measurements with an excellent repeatability precision.
|
|
Heavy Dynamic Penetrometer and sampling system
Heavy dynamic penetrometer and sampling (SPT). Sampling with hammering system. A unique simultaneous casing/sampling system 115mm. Easily manoeuvrable. 3 configurations : Stand alone, trialer mounted and track mounted
|
|
|
Introduced in 1965, the WESTport Rex Model 1700 was designed to enable the user to observe and measure the "creep" present in a specimen. Creep refers to the tendency of the durometer indentor to continue to penetrate a specimen over time, giving lower durometer readings. For example, if the durometer is held against a specimen in full contact and with constant pressure; the durometer reading will decrease over a period of seconds after the initial reading is taken. In a specimen with creep, the initial reading may be 35.0 durometer points while the reading after three seconds may be 33.5 durometer points. The Model 1700 features a max- hand and an active hand so that creep may be observed. The max hand holds the maximum reading while the active hand can be observed creeping down the scale. The 1700 is equipped with a max-hand reset button on the top left of the gauge.
|
|
Application：
The Webster Hardness Tester is a portable, fast, accurate hardness gauge for testing Aluminum, Brass, Copper and Mild Steel. Webster Hardness Testers will quickly identify tempers and test a variety of shapes that other testers cannot check, such as extrusions, tubing and flat stock.
●Achieve world，s first digital measurement of aluminum alloy Webster hardness
●The use of micro photoelectric sensor ensure the measurement accuracy
●User-friendly LCD display, measured value clearly, with backlight
●Automatic latch the measured peak value
●Calculate the average value
●Pre-setting of upper and lower limit are available to facilitate the batch testing
●Built- in buzzer and LCD blinking function, providing abundant prompt information
●Large capacity memory, 5000 groups data can be stored
●Shut down automatically
●Be able to carry out data communication with PC
●Rechargeable Li battery
●Applying the carbide penetrator and worktable ,greatly enhance the durability
|
|
On-Board memory holds 240-1000 groups of data
Automatic identification Impact Devices and test direction (Except G impact device)
Six Impact Devices are available for special applications
Integral thermal printer, print all test results and histogram
Li Battery , low voltage indication and sound alarm
Dataview for PC operation
Software data and upper / lower limits setting and sound alarm
Software to connect with PC
Large LCD with back-light, showing all functions and parameters
Direct display of hardness scales HRB, HRC,HV, HB, HS, HL
Conversion to tensile strength (U.T.S.)
For all metallic materials
Wide measuring range
Time and date setting; auto-clock
|
|
USB communication interface
Automatic identification of impact test direction
Memory of 270 average testing in 9 group files
Upper and lower limit setting
Automatically switch off
Backlight for convenient use in darkness
Battery capacity display
AAA1.5V battery
Integrated calibration function
TH170: integrated with D impact device for normal hardness testing
TH172: integrated with C impact device for hardness testing on thin, light and face-hardened workpieces
TH174: integrated with DL impact device for hardness testing of deep grooves and tooth surface
|
|
|
|
Hardness tester
