Other laboratory analyzers

... Introduction Gasboard-3000UV is designed based on ultraviolet differential optical absorption spectroscopy (UV-DOAS) technology. Compared with the Luft NDIR and Micro-flow NDIR flue gas analyzer, it can measure ultra-low range (0-50mg/m3) of SO2 and ...

... Introduction Gasboard-3000Plus is designed with patented Micro-flow infrared technology and able to measure concentration of SO2, NO, CO, CO2, CH4 simultaneously, especially suitable for emission measurement from various stationary sources. Furthermore, ...

... Introduction Gasboard-5020 emission gas analyzer is designed for measuring the emissions of all gasoline, LPG or CNG vehicles, it is developed based on the dual beam non-dispersion infrared (NDIR) principle to measure CO, CO2, HC, and electrochemical ...

Compact multifunction analyser for use in three-phase three or four wires systems with unbalanced load. The QUBO H version has, in addition to the main quantities of an electrical network (including bi-directional active and reactive energy counting), ...

Multifunction network analyser suitable for use in three-phase three or four wires systems with unbalanced load even in the presence of distorted waveforms. It allows the display of the main quantities of an electrical network (including active and reactive ...

The kit contains a multifunctional analyzer with 3 Rogowski coils. The analyzer input does not require external integrators. It is suitable for use in three-phase three-wire or four-wire electrical systems, even with unbalanced loads and distorted waveforms, ...

... The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters such as NH3 ...

... Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features ...

... Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological performances ...

The SCHMIDT + HAENSCH Purity Analyzer is an inherent component in the analysis of sucrose content. It is applied at payment laboratories of the cane and beet sugar receptions. The modular design of the instrument enables you to automatically calculate ...

... The SCHMIDT + HAENSCH automatic Purity Analyzer is the first system worldwide capable of on-line measurements of factory juices, e.g. sugar juices. Samples are automatically taken from various selection points during processing, e.g. pipes or pans, and ...

A fast and accurate analysis of the liming process is an important step in juice purification in a sugar factory. The on-line process analysis enables continuous process monitoring of the beet juice, enabling immediate process regulation. The automated ...

... This PAT testing kit includes: Apollo 400+ PAT Tester Test n Tag Elite 2 Printer QR Bluetooth Barcode Scanner 2x Elite durable labels 25mm 2x Elite durable labels 75mm Apollo Kit Carry Case 110V Test Adaptor ...

... This PAT testing kit includes: Apollo 500+ PAT Tester Test n Tag Pro Printer 1D Bluetooth Barcode Scanner 2x Pro labels 25mm 2x Pro labels 75mm Apollo Kit Carry Case 110V Test Adaptor ...

... This PAT testing kit includes: Apollo 500+ PAT Tester Test n Tag Elite 2 Printer 1D/QR Bluetooth Barcode Scanner 2x Elite durable labels 25mm 2x Elite durable labels 75mm Apollo Kit Carry Case 110V Test Adaptor ...

... Overview
The netANALYZER NANL-B500G-RE is a portable, passive analyzer for Real‑Time Ethernet networks. Delivery includes the capture hardware (stand‑alone box) and the Windows analysis application netANALYZER Scope. The hardware records telegrams ...

... Overview
The netANALYZER is a tool for the simple analysis of Real-Time Ethernet networks. A capture-hardware for recording the telegrams in the network as well as a graphical user software for Windows with extensive analysis functions are included. ...

... For analysing the quality of quenching and insulating gases The EcoAnalyser is designed to meet the requirements of the user in medium and high voltage analysis of quenching and insulating gases and is ready for use as soon as it is switched on. High-quality ...

... Gas type : SF6 Sensors : percentage in N2 Features : storage of measuring results Features : WiFi Features : gas return system Standard version • battery operation and/or external power supply • indication of moisture concentration in dew point ...

... Gas type : SF6 Sensors : moisture Features : storage of measuring results Features : WiFi Features : gas return system Standard version • indication of moisture concentration in dew point °C or °F, referred to atmospheric or inlet pressure, • ...

The Multi EA 4000 Model of NDIR Elemental Analyzer, manufactured by Analytik Jena, is specifically designed for an accurate and reliable environmental analysis. This device ensures completely automated determination of the environmentally relevant parameters ...

... With unique technologies and intuitive software, the new multi N/C x300 series TOC/TNb analyzers to make your daily laboratory work while delivering reliable results. The new analyzers were designed with saving you time in mind. Smooth workflows and ...

The AOX/TOX Analyzer multi X 2500 is manufactured by Analytik Jena, it is designed to provides a flexible, future-oriented system for sum parameter analysis that meets the requirements of every modern laboratory. The fully automated autoX sampler allows ...

... Measuring the level of contaminants on a surface prior to application of the coating is essential to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly ...

... The Elcometer 134S Chloride Ion Test Kit for Surfaces allows the surface to be tested for chloride salts prior to application of a coating. Chloride salts left on the surface before the first coat is applied can result in the coating system being forced ...

The Elcometer 139 Amine Blush Swab Test Kit is a rapid colourimetric test designed solely for the use in the quick and immediate identification of amine blush (carbamates) on the surface of coatings using surface swabs. The presence of amine blush is ...

... Overview The TA1Plus texture analyzer is an easy-to-use, cost-effective solution to evaluate the textural properties of a wide range of products. The instrument is designed for laboratories, R&D and quality control environments across food, cosmetics, ...

... A cost-effective upgrade solution for your ADTS 405 MkI Military authorities throughout the world have adopted the ADTS 405F variant as standard equipment over a number of years. The MkI version is obsolete and due to parts availability is no longer ...

... Portable two-channel flightline air data test set with large pitot static volume capability for use on a wide range of aircraft from light aircraft to wide body passenger and freight aircraft. Provides pitot static air data validation, leak testing, ...

Portable three-channel flightline Air Data Test Set. Provides pitot static air data validation leak testing, fault-finding and avionics instrumentation testing. The two static channels in addition to a pitot channel make this unit ideal for aircraft fitted ...

The new LINAX PQ5000 Mobile power disturbance analyzer unites proven technology with highly precise measurement, innovative functions and revolutionary communication options. Disturbances can be detected extremely quickly, pinpointed and documented in ...

The in situ analyzer of the cross-stack type is able to perform the average measurement of carbon monoxide over the entire section of the chimney. With no parts in contact with the process and with only the presence of the barrier air, it ensures long-term ...

The iCOMB line offers solutions for industrial applications with the use of in-situ analyzers capable of carrying out the measurement directly in the chimney, without the need for sampling and treatment of the sample gas, for the oxygen, carbon monoxide, ...

... Overview

• Test kit AKB212 for pitot probes used on Bell 212 Civil helicopters
• Designed to facilitate bench and on-aircraft functional checks of pitot probes PH500 and AN5813
• Intended for maintenance stations, MRO and OEM

... Description

• Part Number: AK350
• Part Type: Accessory Kit
• Customer Type: Corporate
• Aircraft: Beechcraft King Air 200 / 300 / 350
• Pitot Probe(s): AN812, PH502 sizes 3 & 5

... Product overview
Test kit AK146 is an accessory kit for functional verification and operational testing of pitot systems on BAE 146 aircraft. Intended for commercial operators and maintenance providers (MRO).

Compatibility

• Part

... Type designation:FCX-MC25-extern-CH Gas:Oxygen Measurement Range:0-25% Sensor Only:No Sensor Incl. Electronic:Yes Output:0/4-20mA, 0-10VDC, RS232/R485 Diffusion / Flow:Yes / No Remarks:Zirconia, long lifetime, electronic board and sensor connected ...

... Robust design for demanding applications Pewatron has released a new oxygen sensor module that can be used in demanding applications where oxygen concentrations below 1000 ppmO2 are measured. The key element of the sensor module is the oxygen sensor ...

... Type designation: FCX-MC95-CH Gas: Oxygen Measurement Range: 0-95% Sensor Only: No Sensor Incl. Electronic: Yes Output: 0/4-20mA, 0-10VDC, RS232/RS485 Diffusion / Flow: No / Yes Remarks: Zirconia, long lifetime, integrated flow cell ...

... True TOC Measurements Across Many Industrial Applications Our LAR™ QuickTOCultra™ online TOC water analyzer is one of the most reliable TOC measurement systems for the roughest wastewater applications on the market today. Due to an unrivaled injection ...

... Ideal for process control, flare safety control, and combustion control In situ, real-time readings for optimal fuel efficiency of boilers, furnaces, and kilns, with fast and simple service ability, and all at a tremendous value. Our COSA XENTAUR™ O2CX ...

... Our COSA XENTAUR™ Zircomat™ zirconia oxygen gas analyzers are widely used; not only in industries of high energy consumption, such as steel, power, petrochemical, ceramics, pulp and paper, food and beverage, and textile industries, but also in various ...

... Simple to use Ethane Gas Analyzer (EGA) for determining the methane, ethane and propanecomponents of a gas sample. Ethane analysis – Natural gas or swamp gas? Before making an expensive excavation you need to be sure the gas detected is really emanating ...

R203 is an extremely versatile Universal Input Energy power meter with a wide range of current measurement inputs. It can handle voltage-transduced currents, direct voltages, and Rogowski sensors with voltage output up to 333 mV. This instrument offers ...

Z203-2 is a complete single-phase network analyzer suited for use with up to 500 Vac voltage range and 5A current. The instrument provides all the following electrical measurable variable: Vrms, Irms, Watt, Var, Frequency, Cosφ. Measurements are available ...

S203T is a complete three-phase network analyzer with up to 600 Vac voltage range and up to 100 mA current range (specific CTs must be used). The instrument provides all the following electrical measurable variables: Vrms, Irms, Watt, Var, Va, Frequency, ...

... ISO 17025 Accredited An all-in-one, benchtop flow analyzer capable of testing virtually all models of ventilators: adult, pediatric, anesthesia, neonatal, and high-frequency. It can also test a variety of other medical equipment such as anesthesia gas ...

An all-in-one, benchtop flow analyzer capable of testing virtually all models of ventilators: adult, pediatric, anesthesia, neonatal, and high-frequency. It can also test a variety of other medical equipment such as anesthesia gas delivery machines, air-oxygen ...

... Detcon Model 1000-CO2 and Model 1000-H2S Analyzers are designed to provide continuous, accurate, real-time measurement of gas concentrations in a wide variety of process gas streams. The instrument package is rated for Non-Hazardous areas. . Available ...

... Hybrid signal analyzer for power utility automation systems DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard wired binary status signals) and messages on the communication network ...

... FDS-PDC+ dielectric insulation analyzer DIRANA uses dielectric frequency response (DFR) analysis in order to determine the condition of high-voltage insulation systems such as those in power transformers, bushings, cables and generators. It automatically ...

FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the electrical transfer ...

... The FluegasExact 2700 delivers effective combustion analysis Designed to measure O2 and COe in flue gases for improved combustion efficiency and reduced emissions, the SERVOTOUGH FluegasExact 2700 gas analyzer meets the most demanding needs of combustion ...

... The Laser 3 Plus Combustion is a compact, fast-response analyzer Containing all the benefits of Servomex’s Tunable Diode Laser (TDL) technology in a light, compact unit, with unmatched installation flexibility plus cost and performance benefits, the ...

A key part of our three-phase strategy for clean air, the Laser 3 Plus Environmental is our latest solution for accurate ammonia (NH3) measurements in DeNOx processes. It also meets all uptime and performance requirements for the US EPA PS18 standard, ...

... CVM-A1500 is a panel mounted power quality analyzer with EMS (Energy Management Software) integrated. Its internal Web Server (html5) allows any user to have full installation control by using any web browser. Designed to be installed in the most relevant ...

... Three-phase power analyzer (balanced and unbalanced) for mounting on DIN rail, very compact, with measurements in 4 quadrants. Other features: Current measurement .../5 or .../1 A or .../250 mA With ITF technology: ITF galvanic insulation protection DIN ...

... The Line-CVM-D32 is a power analyser that measures, calculates and displays the main electrical parameters in single-phase networks, in systems with two phases without ground, with ARON connections or balanced or unbalanced three-phase systems. The ...

... The ASCO CO2 Gas Purity Tester has been designed to measure the purity of CO2 up to 99.995 % in a quick, easy and reliable way. Essential for bottling plants, breweries, beverage manufacturers and industrial gas companies. The complete kit contains ...

... The ASCO CO2 Carbonation Tester is used to identify any strange odour and/or taste in CO2. With this simple, easy to use kit you can check the quality of your liquid or gaseous CO2 from bulk tanks or CO2 cylinders. The set includes a CO2 carbonation ...

... The ASCO CO2 Dew Point Tester reliably indicates the dew point (moisture content) of your CO2. This equipment makes it easy to measure the dew point of liquid and gaseous CO2. A laminated, illustrated step-by-step short instruction sheet in A3 format ...

... Test push/pull strength and functional task requirements up to 500 lbF (2,500 N) These kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These kits present ...

The Model EKM5-200 Myometer Kit facilitates a wide range of strength assessments and ergonomics studies. Featuring a Series 5 force gauge with 200 lbF (1,000 N) range, tabletop mount, strap, and accessories, this kit is ideal for ergonomists and other ...

Series E push / pull force gauges make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. Series E presents the ergonomist and other professionals with a simple and economical ...