Other laboratory analyzers

The combustion analyzer G4 ICARUS Series 2 with HF induction furnace and HighSense detection is the ideal instrument for rapid and precise carbon (C) and sulfur (S) analysis in solids. ZoneProtectTM ensures a clean, fast & efficient ...

The G4 PHOENIX DH hot extraction analyzer is the right solution for accurate and rapid diffusible hydrogen measurement to avoid embrittlement, hydrogen-induced cracking and other costly failures. The G4 PHOENIX DH, utilizing the carrier ...

G6 LEONARDO – Highest Reliability and ECOnomics The G6 LEONARDO with FusionControl and SampleCareTM achieves the highest level of robustness and economics for industrial process- and quality-control. The G6 LEONARDO is based on the ...

Portable grease analysis kit for field use Lubricant analysis is a vital part of a predictive maintenance strategy. Until recently, however, oils were almost always analysed despite the fact that around 80% of bearings are lubricated ...

Oil check monitor Detects changes in oil condition The SKF TMEH 1 is a portable instrument that displays immediate information on the oil condition, which in many cases makes a lengthy laboratory investigation unnecessary. The unit ...

FPI’s ambient air monitoring system consists of a sampling subsystem, a gas dynamic calibration subsystem, a meteorological parameters monitoring subsystem, a standard parameters monitoring subsystem, and a data acquisition and processing ...

Micro AQMS gives a macro indication in terms of trend analysis against stationary AQI analysis. The micro AQMS is to find out the pattern of spatial pollution distribution during a certain period. These data support AQI results at the ...

Ozone Analyzer FPI AQMS-300 Ozone (O3) analyzer measures ambient O3 concentration in ppb level by utilizing UV photometric absorption technology. Key Features Accurate direct UV absorption with reference comparison Various outputs include ...

The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion processes. Easy ...

Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...

Lancom 4 delivers the complete solution for portable flue gas analysis, integrated into a compact battery-powered unit able to measure up to eight gases simultaneously with nine separate sensors. Simple to set-up and easy to operate, ...

LECO’s 832 series will redefine the way you determine sulfur and carbon in a wide variety of organic and some inorganic materials. Using extensive customer feedback and innovative engineering, our latest instrumentation takes advantage ...

By incorporating state-of-the-art hardware and an on-board, touch-screen software platform, the 828 Series allows you to easily handle a wide range of sample applications. CHNS analytics and protein analysis according to Dumas with highest ...

The TruSpec Micro delivers optimal performance in carbon, hydrogen, nitrogen, sulfur, and oxygen determination in solid or liquid micro samples. Components work together to provide you with reliable, consistent performance marked by rapid ...

✔ Increased measurement range for unlimited measurements even when gas concentrations are higher ✔ Easy-to-change gas sensors and easy access to wearing parts ✔ Sealed housing with built-in impact protection for use in harsh conditions ✔ ...

The in situ analyzer of the cross-stack type is able to perform the average measurement of carbon monoxide over the entire section of the chimney. With no parts in contact with the process and with only the presence of the barrier air, ...

IN-SITU SYSTEMS FOR PROCESS MEASUREMENTS The iCOMB line offers solutions for industrial applications with the use of in-situ analyzers capable of carrying out the measurement directly in the chimney, without the need for sampling and ...

• Accessory kits to complete earth electrode testing and soil resistivity surveys • Can be used with any of the DET2/2, DET2/3, DET3 or DET4 Megger earth testers as well as Megger MFT models • Easy wind and unwind reels ...

• Highest dynamic range and accuracy in the industry • Smallest and most rugged FRA instrument in the industry • Fulfills all international standards for SFRA measurements • Advanced analysis and decision support ...

• Automatic CT recognition identifies the current clamp that is connected to the analyser as well as the range to which the CT is set • Automatic connection verification identifies and notifies you if the product has been connected ...

The CA 8345 is a Class A Qualistar power and energy quality analyser. Like the Qualistar+ models, it is equipped with an intuitive HMI and remains simple to use. Multilingual online help can be displayed at any time on the large colour ...

All the parameters simultaneously Designed for test and maintenance departments working in industrial or administrative buildings, the Qualistar+ C.A 8333 can be used to obtain a snapshot of the main features characterizing the quality ...

Designed for test and maintenance teams working in industrial or administrative buildings, the Qualistar+ C.A 8336 can be used to obtain a snapshot of the main features characterizing the quality of the electrical network.. This analyser's ...

The microplate extension HTS-XT allows optimizes FTIR spectroscopy for high-throughput screening. The acquisition, control and evaluation of spectral data from large numbers of samples is completely automated. The HTS-XT is an external ...

SiBrickScan (SBS) is a dedicated at-line system for the FTIR quantification of interstitial Oxygen in complete Silicon ingots, resulting in a precise concentration profile along the longitudinal axis. Accessing this information without ...

Thermogravimetric analysis (TG) follows changes in mass of the sample as a function of temperature and/or time. TG gives characteristic information about the composition of the measured sample, the amounts of the various components and ...

With unique technologies and intuitive software, the new multi N/C x300 series TOC/TNb analyzers to make your daily laboratory work while delivering reliable results. The new analyzers were designed with saving you time in mind. Smooth ...

The multi N/C 2100/2100 S is a Total organic carbon (TOC) and total nitrogen (TN) analyzer. It is crafted with a focus radiation NDIR detector and a VITA Flow Management System (multi N/C 2100 S). This device can stand 950 °C, multi N/C ...

The Multi N/C 3100 model, manufactured by Analytik Jena, is a total organic carbon (TOC) and total nitrogen (TN) analyzer specifically designed for all fluid samples. This device is integrated with catalytic high-temperature combustion, ...

5E-S3220 Automatic Coulomb Sulfur Analyzer is used to determine the total sulfur content in solid and liquid combustible substances such as coal, coke, petroleum, ore and biomass fuel, which is widely applied in power plants, coal mines, ...

Features High Automation The stirring speed and pumping/blowing flow are controlled automatically and make customizable settings as required. With high quality sensors, it can realize precise control. Easy Operation 1. Large volume ...

5E Series C/H/N Elemental Analyzer is used to determine carbon, hydrogen, nitrogen content in solid and liquid material, such as coal, coke, oil, petroleum, biomass, fertilizer, plastic, food, hydrocarbons and plant tissue, leaves and ...

True TOC Measurements Across Many Industrial Applications Our LAR™ QuickTOCultra™ online TOC water analyzer is one of the most reliable TOC measurement systems for the roughest wastewater applications on the market today. Due to an ...

Ideal for process control, flare safety control, and combustion control In situ, real-time readings for optimal fuel efficiency of boilers, furnaces, and kilns, with fast and simple service ability, and all at a tremendous value. Our ...

High-Performance Dew Point Chilled Mirror Our MBW CALIBRATION™ MODEL 973L™ Dew Point Chilled Mirror Analyzer has a completely new design with an optimal Response Injection System for fast measurement. It is the first transportable analyzer ...