Other laboratory analyzers

Hybrid signal analyzer for power utility automation systems DANEO 400 is a hybrid measurement system that records and analyzes all conventional signals (voltages, currents, hard wired binary status signals) and messages on the communication ...

FDS-PDC+ dielectric insulation analyzer DIRANA uses dielectric frequency response (DFR) analysis in order to determine the condition of high-voltage insulation systems such as those in power transformers, bushings, cables and generators. It ...

FRANEO 800 was developed for testing the mechanical and electrical integrity of power transformers after transportation or exposure to high fault currents. It uses the sweep frequency response analysis (SFRA) principle and measures the ...

Simple to use Ethane Gas Analyzer (EGA) for determining the methane, ethane and propanecomponents of a gas sample. Ethane analysis – Natural gas or swamp gas? Before making an expensive excavation you need to be sure the gas detected ...

The SCHMIDT + HAENSCH Purity Analyzer is an inherent component in the analysis of sucrose content. It is applied at payment laboratories of the cane and beet sugar receptions. The modular design of the instrument enables you to automatically ...

The SCHMIDT + HAENSCH automatic Purity Analyzer is the first system worldwide capable of on-line measurements of factory juices, e.g. sugar juices. Samples are automatically taken from various selection points during processing, e.g. ...

A fast and accurate analysis of the liming process is an important step in juice purification in a sugar factory. The on-line process analysis enables continuous process monitoring of the beet juice, enabling immediate process regulation. ...

The Ultrameter III 9P™ AHL Titration Kit, is based on the tried and tested design of the Ultrameter II™. The 9P adds the ability to perform in-cell alkalinity and hardness titrations either as stand-alone measurements or as part of an ...

The elemental analyzer ELEMENTRAC CS-i measures the carbon and sulfur concentration in predominantly inorganic samples through combustion in an induction furnace and the subsequent analysis of the gaseous combustion products carbon dioxide ...

ELTRA's ELEMENTRAC CS-d is the only analyzer in the market for determination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the ELEMENTRAC CS-d is equipped with both an induction and a resistance furnace ...

The new ELEMENTRAC ONH-p 2 is a powerful and robust elemental analyzer for measurement of oxygen, nitrogen and hydrogen concentrations in inorganic materials like steel, iron, copper or ceramics. The highly sensitive NDIR and thermal ...

The MAT1100 is the right choice whenever you only need to be concerned with the oxygen concentration or whenever only nitrogen is used. Its electrochemical oxygen cell (EC) measures within the range of 0.5 and 35 volume per cent and with ...

If you need to measure the concentrations of oxygen and carbon dioxide, then the MAT1200 will be the appropriate model. In addition to an electrochemical oxygen cell, it features a non-dispersive infrared sensor (NDIR) for the CO2 measurement ...

The zirconium dioxide sensor (ZrO2) of the MAT1400 measures the oxygen concentration over the entire measurement range between 0 and 100 volume per cent. Especially in case of a very low concentration, it will achieve an excellent accuracy ...

Real Tech’s online colour analyzer offers an affordable and accurate solution for real-time colour monitoring. Benefiting from Real Tech’s innovative Split-Sense Pro technology, the need for calibration is limited lowering maintenance ...

Real Tech’s bypass style Free Chlorine analyzer provides rapid real-time measurement of free chlorine, chlorine dioxide and/or dissolved ozone in water or wastewater. Ideal for pressurized applications, the monitoring solution has three ...

Real Tech’s Nitrite analyzer provides rapid real-time measurement of nitrite (NO2) in water. The Nitrite analyzer utilizes light at various wavelengths for measurement. Continuous nitrite monitoring can bring significant value to many ...

Detcon Model 1000-CO2 and Model 1000-H2S Analyzers are designed to provide continuous, accurate, real-time measurement of gas concentrations in a wide variety of process gas streams. The instrument package is rated for Non-Hazardous areas. . ...

The multi N/C 2100/2100 S is a Total organic carbon (TOC) and total nitrogen (TN) analyzer. It is crafted with a focus radiation NDIR detector and a VITA Flow Management System (multi N/C 2100 S). This device can stand 950 °C, multi N/C ...

The Multi N/C 3100 model, manufactured by Analytik Jena, is a total organic carbon (TOC) and total nitrogen (TN) analyzer specifically designed for all fluid samples. This device is integrated with catalytic high-temperature combustion, ...

The multi N/C UV HS wet chemical TOC analyzer can be used with an oxidation agent (peroxodisulfate) or a very efficient source of UV radiation for sample oxidation. This highly flexible system offers excellent sensitivity making it ideal ...

Meet the workhorse in elemental analysis: the UNICUBE. This elemental analyzer combines the low operating costs and the high sensitivity of a micro elemental analyzer with the dynamic measurement range of a macro analyzer. The UNICUBE ...

Experience nitrogen and protein analysis with increased laboratory efficiency. The rapid MAX N exceed nitrogen and protein analyzer operates according to the safe, simple, and eco-friendly Dumas combustion method and offers fast and cost-effective ...

Time to rethink protein analysis Experience fast, precise, cost-saving, and eco-friendly nitrogen and protein analysis with rapid N exceed. The nitrogen and protein analyzer operates according to the safe, simple, and eco-friendly ...

Inox Test is designed to identify the most common stainless steel alloys. Small enough to fit in the palm of a hand, its liquids neither leak nor damage the product, and the result is provided in just 10/15 seconds. Inox Test identifies ...

Pillard Opastop® GP4000H is Fives’ latest solution for low to medium dust concentration to ensure continuous measure and control dust emissions. With advanced back scattering technology for stacks and after bag filter monitoring, Pillard ...

Pillard Oxycheck™ is a stable and accurate analyzing probe for a real-time measure of oxygen concentration in combustion flue gas. Pillard Oxycheck™ ensures fuel-efficiency of the industrial burner. SMART DESIGN As a fixed device, ...

True TOC Measurements Across Many Industrial Applications Our LAR™ QuickTOCultra™ online TOC water analyzer is one of the most reliable TOC measurement systems for the roughest wastewater applications on the market today. Due to an ...

Ideal for process control, flare safety control, and combustion control In situ, real-time readings for optimal fuel efficiency of boilers, furnaces, and kilns, with fast and simple service ability, and all at a tremendous value. Our ...

Our COSA XENTAUR™ Zircomat™ zirconia oxygen gas analyzers are widely used; not only in industries of high energy consumption, such as steel, power, petrochemical, ceramics, pulp and paper, food and beverage, and textile industries, ...

Test push/pull strength and functional task requirements up to 500 lbF (2,500 N) These kits make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. These ...

The Model EKM5-200 Myometer Kit facilitates a wide range of strength assessments and ergonomics studies. Featuring a Series 5 force gauge with 200 lbF (1,000 N) range, tabletop mount, strap, and accessories, this kit is ideal for ergonomists ...

Series E push / pull force gauges make job task analysis and ergonomics analysis simple and accurate, ideal for workplace design, strength assessment, and ergonomic studies. Series E presents the ergonomist and other professionals with ...

The In-Situ TDLS gas analyzer has been designed for meeting the requirements of a large range of CEMS and Process applications. LAS 5000XD uses Tunable Diode Laser Spectroscopy (TDLS) and comes in various models for measuring parameters ...

Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The ...

Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers superior metrological ...

In today’s fast changing world, speed is the key to success. The FX100 Analyzer offers the simplest system integration for the fastest testing of audio and acoustic devices. By its adaptive design, performance-optimized circuits and built-in ...

THE ONLY ON-LINE DIRECT KINEMATIC VISCOSITY ANALYZER EASY CORRELATED TO ASTM D445 The Thermoset-KV (Kinematic Viscosity) is the online analyzer designed to continuously, directly and simultaneously measure the kinematic viscosity, the ...

Viscosity analyzer at reference temperature THE MOST ECONOMICAL ON-LINE VISCOSITY ANALYZER ON THE MARKET The most economical online viscosity at reference temperature analyzer. Using the robust and extremely tolerant MIVI vibration ...

THE ALL-IN-ONE HEAVY-DUTY VISCOSITY ANALYZER AT REFERENCE TEMPERATURE The most cost effective online viscosity at reference temperature analyzer. With its integrated sampling system,Thermoset-CF requires no extra installation and ...