 |
  |
Laser volume measurement system 0.5 - 10 m, IP67 | Bulkscan® LMS511 SICK
The Bulkscan® LMS511 uses time-of-flight technology for non-contact measurement of volume flow on conveyor belts. Using the multi-echo technology, the Bulkscan® LMS511 can combine time-of-flight data with the belt speed to generate a...
 |
 |
X ray diffraction stress measurement device XRD 3003 Stress GE Inspection Technologies
Residual stress is generated by nearly all technical relevant production and treatment processes. It defines the mechanical properties of component parts in the near surface region. Application-driven material design needs defined residual stress introduction for performance...
 |
 |
Load cell tension meter max. 4 500 kg | TM-5 ENERPAC
Tension Meter TM-5 Accuracy, ± 2% of full scale Zinc and bronze...
 |
 |
Silicon drift X-ray detector (SDD) Jeol
Centurio is a next-generation Silicon Drift Detector (SDD) EDS that collects X-rays from S/TEM samples at an unprecedented large solid angle of up to 0.98 steradians from a detection area of 100mm2. Through efficient collection of X-rays at very high count rates, Centurio speeds...
 |
  |
Belt-tension meter TRUMMY2 Schaeffler Technologies AG & Co. KG
The robust, handy FAG Top-Laser TRUMMY2 is an optical-electronic manual measuring instrument belt tension (strand force). The correct belt tension is an essential prerequisite for achieving the maximum life of the belt drive. In addition, this also gives...
 |
 |
The new Absorptometer "C" Data Acquisition System determines oil absorption in compliance with ASTM D 2414 as well as ASTM D 3493 including new procedures B and C. The Absorptometer "C" Data Acquisition System consists of the following major components: frequency inverter drive unit...
 |
 |
Silicon drift X-ray detector (SDD) X-MaxN Oxford Instruments
Launched in August 2012, the new X-MaxN range of Silicon Drift Detector exploits a new sensor chips, new electronics, and innovative packaging to deliver a truly next generation SDD performance. The X-MaxN Silicon Drift Detector comes...
 |
 |
Belt-tension meter 507C series Gates Europe
Correct belt installation tension is essential for optimum performance and reliability of multi-ribbed, V-belt and synchronous belt drives. The 507C...
 |
 |
Melting point meter MPA100 Stanford Research Systems
OptiMelt provides a fast and accurate means of automatically determining the melting points and melting ranges of chemical substances. With microprocessor-controlled...
 |
 |
Belt-tension meter APSOparts® - the Online Shop of Angst+Pfister
Material:aluminium Measuring method:By measuring...
 |
 |
Porosimeter Pascal 140 Thermo Scientific - Scientific Instruments and Aut
The Thermo Scientific Pascal 140 is a fully automated low-pressure mercury porosimeter and sample preparation unit. It works from vacuum up to 400 kPa pressure providing fast and reliable porosity characterization from 3.8μ up to 900μ pore dimension. The high level of automation...
 |
 |
Belt-tension meter Carlisle Power Transmission/Dayco
Belt tensioning device Spring loaded tensioning device. Features: Belt tensioning method designed upon the principle that...
 |
 |
Melting point meter 0.1 ºC | IA9000 Electrothermal
IA9000 Series Melting Point Apparatus The digital IA9000 Series has an adjustable arm that holds an 8x viewing magnifier which can be adjusted to suit the individual user or neatly folded away into the unit. The large LCD display, simple menus and membrane keypad make this product quick and easy to use. Performance •...
 |
 |
Temperature and gas pressure measurement system for hot pressing Contilog GreCon
Temperature & Gas Pressure Measurement with Wireless Sensor in Your Hot Press Optimise your pressing process by measuring the development of gas pressure and mat temperature in any position within your press. The...
 |
 |
HFM 436 Lambda - Heat flow meter With the HFM 436 Lambda, samples measuring 30 cm x 30 cm or 60 cm x 60 cm and of variable thicknesses ranging from a few millimeters to 10 (20) cm are tested between...
 |
 |
Electrokinetic analyzer for solids SurPASS Anton Paar
The Electrokinetic Analyzer for Solid Surface Analysis SurPASS Use the SurPASS electrokinetic analyzer to investigate the zeta potential...
 |
 |
Tension meter for textiles, fibers and wires FK Tensio series Kern & Sohn
Description: ■Tension testing instrument for the evaluation of the tensile properties or strengths of fibres, wires, yarns, etc. ■This test is typically performed to control process specifications in machines, belts...
 |
 |
The ModuLab MTS is a new concept in testing the electrical properties of materials. The system uniquely combines...
 |
 |
Melting point meter max. 400°C | SMP40 Stuart Equipment
Stuart SMP40 Autmatic Melting Point Maximum temperature 400°C 5.7 Inch colour VGA touch screen display Unique split design concept Integrated cooling 350°C to 50°C in 10 minutes Also available with IQ/OQ documentation The SMP40 automatic melting point uses the latest technology...
 |
 |
Creep tester Model 119 TesT GmbH
Creep Testing Benches for New Materials and Long-Term Analyses Carbon-fibre enhanced materials, new plastics and metals need specially...
 |
 |
Ultrasonic bolt stress measurement device USM - 3 Norbar Torque Tools
Large ¼ VGA back lit display is easily visible from a distance and in poor light. Can store up to 4000 bolts, 20,000 elongation and load readings. Rugged steel and aluminium case...
 |
 |
Creep tester Kappa series Zwick
Versatile high-precision creep testing machines for maximum cost-effectiveness. Test frame with four steel columns for high lateral and axial stiffness. Top-quality components include testXpert® II testing software and testControl...
 |
 |
Surface carbon analyzer RC612 LECO
Multiphase Carbon and Hydrogen/Moisture The LECO RC612 multiphase carbon and hydrogen/moisture determinator quantifies the carbon and hydrogen present in various organic and inorganic samples, and identifies the source of several types of carbon content. This state-of-the-art versatile instrument can measure...
 |
 |
Load cell tension meter Cleveland Motion Controls
Cleveland-Kidder Tension Indicators have been redesigned to maximize their performance, versatility and precision. Ultra line and Classic line Indicators...
 |
 |
Laser volume measurement system BVM Perten
The BVM volume analyzer uses laser topography to accurately measure volume and size of bread and bakery products in seconds. Laser topography measures...
 |
 |
Fraas method breaking point test set EN 12593, IP 80, JIS K2207 | BPA 5 Petrotest GmbH
BPA 5 Ready-to-Go-Set to determine the temperature at which a bitumen...
 |
 |
X ray diffraction stress measurement device MSF/PSF-3M Rigaku
These analyzers use X-ray diffraction to nondestructively test residual stress in materials. Residual stress may be created during the manufacturing process of a material, or it may accumulate...
 |
 |
Surface area analyzer by gas adsorption (BET) SA-9600 Series HORIBA Jobin Yvon
HORIBA's breakthrough SA-9600 Series brings exceptional convenience and confidence to surface area and pore volume analysis. Now you can perform single-point surface area, multi-point surface area and total pore volume measurements...
 |
 |
Tool for maintenance mechanics to ensure efficient, cost-saving operations Handy...
 |
 |
Strip tension meter for furnace max. 500 kN | PST Nobel Weighing Systems
The PST has been specially designed for strip tension applications into a continuous furnace where very specific requests...
 |
 |
Photovoltaic cell characterization instrument Beijing Zolix Instruments
One of the key measurements needed for photovoltaic devices in the measurement of their I-V characteristics. Through measuring the I-V curves the user can determine physical performances of devices such as photo-electric conversion efficiency, fill factors and so on. Such...
 |
 |
Coal ash fusibility test analyzer max. 1600°C , max. 12 samples | CAF Carbolite
Digital Coal Ash Fusibility (ash-fusion) Analyser (CAF-DIGITAL): Enhanced models are also available for ash fusibilty testing of biomass and co-fired coal and biomass ash mixtures. At high temperatures, the heat from burning coal is often sufficient to melt its own ash which, when cooled, solidifies into clinker. In...
 |
 |
Ideally for the application with ions selective electrodes. CITSens Ion’s Six-Channel ISE-Potentiometer is used for studying the activity of a large scale of inorganic and organic ions in solutions. The CITSens Ion Potentiometer allows to connect six electrodes...
 |
 |
Flame chamber for burn resistance test SBI EDIT
Euroclasses include new test methods and classification categories of these products vis-a-vis the reaction to fire applied at European level. Euroclasses are the result of work undertaken within the bodies of the European Commission for more than a decade. They...
 |
 |
Film applicator UNICOATER 409 ERICHSEN
Motor-driven film applicator for the application of coatings of...
 |
 |
Surface carbon analyzer SurfaceC-800 Eltra GmbH
ELTRAs SurfaceC-800 analyzer is designed for the precise determination of surface carbon in all kind of solid samples from trace level up to 1000 µg/cm2. Typical sample materials include steel, aluminum, all other metals, ceramics and glass. The SurfaceC-800 is equipped with a resistance furnace with quartz tube for...
