|
|
|
|
|
|
Microbial Air Monitoring
Sampl'air® Impactor superior performance yet ISO 14698 validated
Determination of the microbiological quality of air is vital in a number of sites such as areas where pharmaceuticals and medical devices are manufactured, operating theatres and other critical areas in hospitals and food processing facilities.
Sampl'air air samplers (Lite and Pro versions) enable the microbial monitoring of the air through impacting microorganisms onto a standard Petri dish.
The new generation of Sampl’air units offer you superior performance combined with ease of use
High Accuracy and Reproductibility
- Total traceability (Pro version only), CFR 21 part 11 compliant software and direct connection to a printer
- Secured sampling
- Electronic speed and flowrate auto control
- Battery load indicator and secured cycle start not allowed if battery power not sufficient to complete a cycle)
- Individually tested with its grid installed, comes with a control certificate
- ISO 14698-1 compliant and validated: Superior Collecting Performance tested by the Health Protection Agency (UK)"
The new Sampl’air air sampler has been evaluated according to the ISO 14698 standard by the UK Health Protection Agency (HPA) in Porton Down. The Institute said in its conclusion: “The results of the physical testing of the Sampl’air were very consistent and the standard deviations were of a low order for aerobiological studies... ... the Sampl’air should be capable of collecting over 99% of particles occurring in this environment (Whyte et al 2007)”.
|
|
The Spin Air is the ultimate instrument for air sampling.
Its special design of the holes combined with slow rotation of the plate allows using 100% of the surface compared with the 5% of the still devices.
|
|
General description:
The battery-operated air sampler works according to the impaction and filtration method. The device detects polluted air. The air sampler is primarily applied in hospitals, for the manufacturing of medical equipment as well as in foodstuff production.
|
|
The Casella VOC Pro is an ideal tool for rapid VOC detection and monitoring in air, water and soil.
The Casella CEL VOC Pro Photoionization Detector is ideally suited for undertaking rapid surveys for organic vapours for both indoor or outdoor applications for all monitoring and survey applications
|
|
|
|
|
|
HiVol 3000 High VOlume Air Sampler
The HiVol 3000 Particulate Sampler provides a flexible platform for remote unattended sampling of particulate matter and basic meteorological parameters.
The HiVol 3000 incorporates electronic volumetric flow control and advanced programming functionsinclusing optional wind speed and direction attachments to capture other meteorological parameters.
- Sampling at PM2.5, PM10 and TSP is available
- PUF and XAD versions available
- Wind direction conditional sampling such as fence line monitoring
available
- Advanced active volumetric flow control system automatically corrected
to standard reference temperature 0°C, 20°C, and 25°C and 1 bar (STP
conditions)
- RS232 output for data collection and networking
- Internal data logging of WS/WD, temperature, pressure and flow
- Weather-proof marine quality anodised aluminium cabinet
Ecotech MicroVol 1100 Low volume air sampler
The MicroVol 1100 is suitable for both indoor and/or remote/outdoor applications. Particulates are size selected and collected on a sample filter for gravimetric analysis.
- Portable, quiet, low flow particulate monitor
- 12VDC power source allowing it to be powered through mains power, optional battery pack or solar panel
- Ideal for use indoors for both commercial and private use
- Samples at three levels PM10, PM2.5 or TSP
|
|
|
|
|
|
APS300
Automated Pourer Stacker
The APS300 is a compact automated pourer/stacker designed to provide an efficient hands-free plate preparation. Easy to use, the APS300 ensures a high level of productivity, traceability and security at a moderate cost. All user interfaces and features will help to increase productivity and provide optimal working conditions. For total traceability, the optional ink-jet printer prints directly on the side of the petri plates.
Single carousel with a capacity of 320 plates Ø 55 or Ø 90 mm
Pouring rate up to 750 Petri dishes per hour
Hands-free and automated operation
Easy programming, alphanumerical display and keypad
Store up to 40 user programs
Easy-Load pump for fast tubing loading
Intelligent alarm management
Optional ink jet printer for perfect traceability on the side of the Petri dish
Optional ticket printer
Specific versions for the food, water and clinical laboratories available
The APS300 has been designed to pour and stack automatically up to 320 Petri dishes without any operator intervention once the carousel has been loaded and the programme started. Inverted plates are simply ignored and stacked empty without any operation interruption.
The transfer disc can be easily removed for cleaning
|
|
|
|
|
|
MEDIAJET - reliable walk-away media dispensing system
The MEDIAJET media filling system offers the unique flexibility to fill Petri dishes as well as test tubes of various sizes.
The compact MEDIAJET provides truly reliable, walk-away operation. The dish guidance system is monitored throughout the filling process. Operational downtime due to 'dish jams' resulting from variations of the Petri dishes is completely eliminated. The MEDIAJET vario device version can be converted easily from filling Ø 90 mm dishes to fill Ø 60 mm or Ø 35 mm dishes. Furthermore, the MEDIAJET includes a shaker mode for facilitating pour plate applications. The MEDIAJET is the perfect complementation to the MEDIACLAVE media preparator.
Special features:
- Controlled dish guidance for reliable walk-away operation
- Fast Petri dish processing for filling up to 900 plates per hour.
- Processing of various dish sizes (Ø 90, 60 or 35 mm) and dish heights.
- Biplate option for filling two-compartment Petri dishes.
- Shaker mode for pour plate applications.
- TUBEFILLER option for the filling of up to 1000 test tubes in one hour.
|
|
Do you supply to certified laboratories?
Petriswiss PS 900P with integrated label printer guarantees individual labelling on each dish and meets all traceability requirements.
For direct printing on the dish a professional Inkjet solution is aviable.
|
|
The POLY STAINER is an automated system for Gram stain.
The POLY STAINER is easy to use and completely programmable.
Store up to 10 different programs using customized bath and agitation time.
|
|
RTS A2 is the smallest in the RTS range of automated storage / sample management solutions.
Perfect for smaller labs requiring reliable, high integrity automated sample management, it combines industry standard robotics with robust RTS sample tracking / ordering software.
A2 operates from ambeint to -20degC, is flexible, easy to install and use, and can even be relocated without disturbing the samples.
Designed for collections of up to 76,800 samples, as standard A2 includes:-
•Fully automated sample storage
•Robotic cherry picking
•Sample tracking / ordering software
•12 months warranty
•Support package options
For technical details of this product, please visit the downlaod section above. Alternatively contact an RTS Specialist by emailing lifescience.info@rts-group.com or call +44 (0)161 777 2065.
|
|
|
|
|
|
HI 901 is an automatic titrator from HANNA instruments® that complements our wide range of products dedicated to quick and accurate laboratory analysis. Each unit is provided with numerous features amenable to routine samples analysis. HI 901 performs acid/base, potentiometric titrations. This versatile titrator offers a total of 100 methods: 89 of which can be customized. When powered on, the instrument initiates an internal diagnostics check and then readies itself for the first titration of the day. A large LCD screen clearly shows the chosen method, correlated information and also indicates which parameters may be adjusted. A real-time titration curve is shown on the display; this feature is useful when new methods are tested or when a procedure needs to be optimized. At the end of the titration, all data, including the graph, are automatically stored in memory and can be copied to disk via the built-in floppy drive or through direct connection with the serial cable supplied with the titrator. The device is equipped with an RS485 serial port.
|
|
|
|
|
|
864 Robotic Balance Sample Processor – automatic weighing, dissolving, analyzing in one system
Have you ever wished you could weigh in samples directly on the rack of your processor/analyzer? Fully automatically? Now you can. The 864 Robotic Balance Sample Processor is the first system that allows you to prepare and analyze liquid samples fully automatically in one operation from weighing through to titration.
One system does it all
Metrohm’s 864 Robotic Balance Sample Processor is the first sample processor with a patented weighing technique for weighing out the sample directly on the sample rack. Thus, weighing out and analyzing the sample are integrated in a single system. Not only does automation save time and costs. As manual sample transfer from the balance to the rack has been eliminated, the risk of sample mix-ups is virtually zero.
Perfectly easy to operate
All that the operator has to do is put the sample on the rack and press «START». The 864 Robotic Balance Processor carries out the weighing and analysis fully automatically. The titration and control software tiamo™ allows flexible control of the whole titration system and at the same time guarantees full traceability of the results. Due to its compact size, space requirement for the 864 Robotic Balance Sampler are very low. The new system comes with a complete package including titrator, pumps, balance and further accessories.
|
|
Features:
- High sample throughput
- Automated sample acquisition from a variety of dissolution baths
- Versatile media management
- Local or remote control with Empower Software
- Storage of up to 60 analytical or dissolution methods
- Custom dissolution calculations
- Publication-quality report publisher
|
|
|
|
|
|
All you need is here
epMotion automated pipetting systems will make you see things in a new light. Whether it's sample or reagent transfer, assay set-up or nucleic acid extraction, all your routine pipetting tasks will be automated with more precision and safety than you ever experienced before with manual pipetting. With four models, two instrument sizes and multiple pipetting deck combinations to choose from, epMotion is the perfect companion for your workload.
epMotion automated pipetting is unique
* Flexible - Unlimited applications from cell culture to qPCR in 96, 384-well or single tubes
* Accurate - From 1 µl to 1000 µl - the most accurate automated pipetting solution available
* Easy to use - Ready to go in less than one day – installation and full training in one morning
Feel safe it's Eppendorf
epMotion automated pipetting is the natural step. It's precision is based on the successful Eppendorf pipetting technology. Since introducing piston stroke pipetting technology in 1961 Eppendorf has become the leader in pipetting. Accuracy and quality - epMotion inherited our genes.
Why automated pipetting?
* Reproducibility over millions of pipetted samples
* More precise than manual pipetting
* Frees lab personnel from the bench
* Easier to handle than complex robotic systems
|
|
|
UltraSpense 2000 is the answer to the increasing demand for an automated yet affordable dispenser for 96 and 384 well microplates. High accuracy and precision dispensing into deep well or low profile microplates, coupled with low dead volume and easy programming makes UltraSpense 2000 the ideal solution for virtually all dispensing applications. Dispense a wide range of solvents, acids, bases and other aggressive liquids with confidence through the completely inert liquids path. Optimize performance for a wide viscosity range through the adjustable pump speed. Ultraspense is very fast and accurate; dispense 100 ìl into each well of a 96 well plate within 14 seconds with better than 0.5% C.V. precision.
|
|
As far as sampling is concerned ITECA SOCADEI proposes a complete solution of automated sampling. You can automatically take a matter sample directly flow, ensure its homogenisation by the rotating homogenisation hopper, its transport towards to the analysis laboratory and its storage. This technology makes it possible to ensure a representative sample taking entirely automotive in all of your control points. With this technology you will be able to guarantee a better quality of your production and will be more reactive in the flow pollution event. Its use is largely widespread in particular in cement factories, pets foods, free lime factories, carbonate of calcium manufacturers, loading of cereals, PVC...
|
|
The PLATE HANDLER can be used for different applications. The first development is to automate the colony counting with COUNTERMAT FLASH or Flash & Go.
Built-in Bar code reader: The bar code reader stops the rotating movement when has got the information. This information could be used for identification purposes as well as to give orders to the counter.
Compact carrousel: The Petri plates are stacked in a carrousel that contains up to 80 (four columns of 20). The carrousel is taken from the incubator and installed in the unit. The Petri dishes can have a bar code label to be identified. If they do not have a bar code label, the position of the Petri plate in the column and the column itself are used as identification.
Automated counting: The PLATE HANDLER can be used for different applications. The first development is to automate the colony counting with the COUNTERMAT FLASH or Flash and Go.
|
|
The AS 100 OEM Autosampler uses a simple and reliable drive mechanism to provide automated sample introduction, enabling you to perform other tasks while the system is operating. The AS 100 autosampler automatically introduces up to 1536 samples when loaded to maximum capacity. It contains a microprocessor that allows sequential or random sampling, providing analytical flexibility.
Standard Features
- One year OEM warranty on parts and labor but lifetime application support from Aurora Instruments Ltd.
- Intelligent XYZ movement for effortless compatibility
- Dispensable reagent volume of up to 1000mL, selectable increments of 1mL
- Sampling capacity of up to 192 sample cup/test tube (0.5 to 10ml) sample racks.
- Compatibility with standard solvent extraction test tubes, ICP test tubes, micro plates and custom made trays
- Compact size - footprint is 558W x 220D x 308H mm
- Aurora integrated manufacturing, service, and support ensure quality, on-time delivery, and quick response
|
|
|
|
|
|
XSIZE™
Automatic Sampler
Takes samples during blending or mixing operation
The XSIZE automatic sampler from Dynamic Air Inc. has been designed to take almost any sample size automatically during a blending or mixing operation. It provides a method to take samples at any point in a process system for verification of dry bulk materials. Fabricated from all 304 or 316 stainless steel construction, it can be programmed to take a sample upon demand at predetermined times as required.
The XSIZE automatic sampler is designed for mounting directly on a mixer, discharge chute or any place in the process desired. Samples are then collected in a standard commercially available clear plastic container. Removal of the plastic container is simple and done manually. Special features include a highly polished, 304 or 316 stainless steel feed screw and a powerful 220/440 volt motor and drive assembly.
Features
- Highly polished stainless steel feed screw
- T.E.F.C. 220/440 volt motor and drive assembly
- Custom feed rates
- Programmable
- Made to fit most standard clear plastic jars
- Air operated isolation valve
- Simple mounting arrangement
|
|
|
|
|
|
The In-Line Automatic Sampler
A Primary Cross-Cut Sampler is most often installed in place of a section of spouting and can be either a 90 or 45 degree model. As material flows through the sampler, a "pelican" type diverter, with an opening in the leading edge, traverses the stream and extracts a representative sample. The "pelican" remains in the rest position, under a seal and OUT OF THE MATERIAL STREAM, until an automatic/manual signal is given to collect another sample. Frequency of travel is controlled by a timer in the control panel.
Sample Divider
A Mechanical Divider receives the "sample" by gravity from the primary sampler. Then it passes through a continuously oscillating swing valve that reduces the "sample" and distributes it into a 1, 2, or 3 sample adapter. Dividers are manufactured in four models--MD 100, MD 200, MD 300, and the MD 1000, and use is determined by the flow rate, installation, and frequency of the samples. Excess sample is returned to the material stream.
Automatic Controls - Sealed and Locked
A Control Panel controls the operation of the primary sampler and mechanical divider. A digital integral timer is used to control the frequency of travel of the "pelican." Panels can be built for individual control or for control of multiple sampling systems.
Collection Systems
Collection cabinets come in a totally enclosed, sealed bagging unit, an enclosed hopper cabinet, or a sealed automatic indexing jar sample collection system.
|
|
|
Introducing GPCmaxTM, the world’s first integrated pump, autosampler and degasser module specifically designed for GPC/SEC applications. It mates seamlessly with Viscotek's Triple Detector Array, Viscotek's Dual Detector or a simple concentration detector to form a complete GPC/SEC system.
|
|
|
|
|
|
TriPlus™ Autosampler
The new TriPlus Autosampler is the most flexible platform conceived for modern analytical labs.
Product Detail
Merging robotic technology for vials and syringe operation, with advanced controls of the three dimensional space movements of the syringe holder (XYZ), the new TriPlusTM Autosampler is providing larger flexibility in sample capacity for high lab productivity, while still delivering unprecedented lab automation.
Now available with Solid Phase Microextraction (SPME)* capability for further laboratory productivity by offering a one-step process for sample preparation without requiring hazardous solvent usage. SPME is a novel solvent-less sample preparation technique, involving extraction, concentration and introduction of analytes in a single step.
Automate two GC or GC/MS systems at once for ultimate productivity. The TriPlus Autosampler is also now compatible with other manufacturer GCs and data systems.
The ability to independently serve multiple GC platforms for higher productivity is just one of the unique values delivered by this new Thermo Scientific premier product.
All TriPlus movements are step-by-step controlled ensuring reliable operations for thousands of samples. The same controls permit automatic alignment procedures and self-recognition of all available accessories (solvent stations, bar code readers, incubation heated oven, vial tray holders and type) making for quick installation of the autosampler and easy start-up.
|
|
|
The BioCube System SX is an enclosed platform with a 4‐axis robotic arm that moves around the workspace. The BioCube System SX is compact and perfectly suited for laboratory automation processes that do not require our largest deck configuration.
|
|
|
The BioCube System LX is an enclosed platform with a 4‐axis robotic arm that moves around the workspace. The BioCube System LX laboratory automation solution offers the largest deck capacity and greatest number of configuration options.
|
|
Controllers SBC-08
In accordance with 21 CFR Part 11 Smart Bioreactors Controller
The control software SBC-08 is realised in Lab view 7.1 andis compatible with the mainoperating platforms such as Windows, Mc, Linux.The user’s interface consists of a monitor, equipped with touchscreen substituting the keyboardin all its functions, and a controlpanel.The colour monitor 12” is used for managing the variables, forreading the values and the state of variables, for visual verification of operator’s interventions. The monitor is usually placedin the high part of the control
module, but it can be positioned also in the remote position.
|
|
Intelligent Bioreactors Supervisor
Projected for fed-batch and IBS-05 Control System is an elaborated software extremely versatile, using the Internet Browser as visual display unit and permits the management, control and remote assistance on the net. Projected for fed-batch and continuous processes.
|
|
This automated filling system represents a cost-effective solution by replacing manual operations with state-of-the-art laboratory equipment for rapid and accurate filling.
Consisting of a high precision dispenser (PM05) and a highly repeatable robotic module (XY500), it ensures the automated filling of tubes, bottles, impedance cells, etc. for greatly enhanced laboratory productivity.
Print-out of all dispensing parameters complies with GLP and EN 45001 (option).
The system dispenses any type of liquid into two 252 tube racks in a complete cycle. The unique quick-load system developed by AES Laboratoire reduces loading time by eliminating unnecessary handling of tubes.
|
|
|
|
|
|
New Automated Culture Media Preparation
NEW AES Laboratoire Media Preparators
The 5th generation!
Drawing from an experience of 25 years in the manufacturing of media preparation equipment, the new AES Laboratoire Media preparators represent probably the finest equipment available today. AES Laboratoire is the only equipment manufacturer that also produces ready-to-use culture media and uses its equipment for the production of plates and tubes.
The new Masterclave 09 lets you rapidly prepare 1 to 9 liters of highest quality culture media thanks to a new extra large magnetic stirrer and high precision core temperature control. The new metallic safety lid with magnetic sensor features a viewing polycarbonate window.
The new Masterclave 528 with a capacity of 5 to 28 liters is ideal for preparing large batches of agar plates or broths. The new easy-opening and easy-closing lid and the graphic user interface make it very comfortable to use. Like all AES Laboratoire preparators, a particular attention has been taken to ensure a perfect homogenisation and core temperature monitoring, thus guarantying high quality culture media.A 60 liter capacity model for larger batches is available (Masterclave 60).
All media preparators can also be used as high tech autoclaves. A full line of automatic or semi-automatic dispensers for plates and tubes and Dilumat gravimetric diluters are also available.
|
|
|
|
|
|
MASTERCLAVE 528
5 to 28 liter capacity
Drawing upon over 25 years' experience in the manufacturing of media preparators, the new Masterclave 528 represents propably the finest equipment available today.
- Large magnetic stirrer (patented) provides excellent medium homogenization during sterilization and distribution. 3 selectable stirring speeds
- Accurate core temperature monitoring guarantees highest-quality agar or broth even for large-prepared volumes.
- Robust and lift-assisted safety cover has automatic closing above 80°C and maintenance free magnetic sensor. Polycarbonate transparent window.
- New FAST and ECO operating modes let you save time or reduce the cooling water consumption
- Graphic display provides clear information - 40 customable programms - RS232 port for PC-connection - Bar Code port - Compatible with Labguard 2 radio-operated temperature monitoring sytem.
- Optional printer provides total traceability
- Easy opening and easy closing lid
- Easy-to-clean thanks special cleaning valve
- Can be used as high-tech autoclave
|
|
|
|
|
|
Smartline Manager 5000 (LPG, Degasser, Interface)
Fully equipped analytical version of the Smartline Manager 5000, which includes a low pressure gradient (LPG) module, a 4-channel degasser module, and an interface module for 3rd party instruments.
The combination of the Smartline Manager 5000 with the Smartline Pump 1000 provides for a quaternary LPG system. The valve block built of PEEK is controlled by the Smartline Pump 1000 and delivers gradient mixtures of the highest precision over the entire flow range up to 50 ml/min.
An optional integrated 4-channel degasser module provides outstanding performance through its use of a newly developed micro vacuum pump while taking up only a minimum of space. The gas diffusion rate has been improved by a factor of 200 - 300 times, thanks to a new amorphous fluoropolymer rather than a regular Teflon membrane. Excellent chemical and physical stability parameters, as well as the reduction of the internal chamber volume to less than 0.5 ml are convincing features. The analytical Smartline degasser module can be used for flow rates of up to 10 ml/min
The Smartline Manager 5000 can optionally be equipped with an interface module. This interface module enables highly precise data acquisition and provides for the control of non-Knauer devices over analog and relay outputs. Supports 4 channels at sample rates of up to 10 Hz or one channel at up to 50 Hz.
|
|
|
|
Laboratory automation equipment
