|
|
SeTAC
THE MACHINE ON BOARD MONITORING
SeTAC is a triaxial intelligent vibration sensor that, installed onboard a machine, provides continuous monitoring, ensuring maximum reliability of the measurements taken.
With SeTAC it is possible to identify specific events (collisions, unbalances, overloads, wear of specific mechanical parts), distinguishing significant vibration from background noise by using filters that can be calibrated by the user. The user can set three digital alarm thresholds with a highly reduced response time (1 ms). SeTAC can be easily interfaced with the machine’s control logic to automatically activate the corrective measures defined by the user or linked to the company control network via Ethernet for continuous monitoring.
The tool’s internal memory enables SeTAC to carry out a black box function, recording up to 12,000 events and indicating the date, duration and value of the phenomenon.
|
|
- T1-45: Vibro-alarm
- T1-D: Absolute vibration monitoring, single channel with
- T1-D2: Absolute vibration monitoring, single channel with
- T1-EV1: Absolute vibration monitoring, dual channel with 2
- T1-EV2: Absolute vibration monitoring, dual channel with 4
- T1-EA: Absolute vibration monitoring, with 4 alarm relays
- T1-DADV: Absolute vibration monitoring, with 2 alarm relays
- T1-C: Relative vibration monitoring, dual channel with 4
- T3-NC2: Absolute vibration monitoring, dual channel
- T13-N: Speed monitoring, zero speed, reverse rotation
- T1-NC2: Axial displacement monitoring, dual channel with 4
- TMP: Vibrations monitoring, axial displacement, differe
- TMP-SOFTWARE: Diagnostic and data management software
- TM1: Vibrations monitoring, dual channel programmable
|
|
|
|
|
|
TopMessage and TopLab are similar devices and differ only in construction design. TopMessage is designed as a rail mounted device. Signals are connected via clamps.
Message devices can be easily integrated into existing company networks via its Ethernet interface. This means anybody within the network can have access to measurement data using their existing PCs.
Delphin's modular Message devices enables the acquisition of any physical values (e.g. temperatures, pressures, flows, vibration data). Measurement values are stored in the devices already scaled and lineated (e.g. bar, liter/sec, m/min, °C etc.). The scaling of thermocouples and RTD sensors are pre-configured.
A device comprises of 1 or 2 I/O modules which can be combined in any way required. Extension devices can be connected to the basic device, each also having 2 I/O modules. This means Message devices are suitable for both small and large applications.
Each analog input can be separately connected with RTD, thermocouple, volt or 20 mA signals. Expensive measuring transducers are no longer required and potential isolation means there is no need for isolating amplifiers. All I/O module analog inputs are set up as differential inputs.
|
|
|
Snapshot IS provides intrinsically safe data collection / analysis in a convenient, palm-sized package weighing just 1.5 lbs. (680 grams). With both a phase input and a dynamic signal input, it is the industry's only data collector in this size/weight range that boasts both intrinsically safe operation and the ability to capture not just static readings but waveforms, vectors (for balancing and diagnostics), phase information, and spectra. The instrument uses the Microsoft* Windows* CE operating system, is fully compatible with our System 1® software, and features a user interface consistent with that of its larger 2-channel counterpart, Snapshot CE.
|
|
|
FastTracer is an innovative portable triaxial vibration measurement and analysis solution, ideal to be used in different fields of applications such as predictive and routine maintenance, testing, structural analysis, support to research and development, diagnostics, technical assistance and didactics.
|
|
CF-4220Z - Personal FFT Analyzer
A user friendly instrument that brings the power of FFT analysis within easy reach.
Features:
- Compact, ergonomic design and light weight.
- Easy to read 6.4" LCD
- 20 kHz real-time rate.
- Frequency zoom analysis.
- Built-in sensor power.
- Built-in 3.5" disk drive.
Specifications:
- Number of Input Channels: 1
- Frequency Range: 1 to 40 kHz
- A/D Converter: 16-Bit
- Dynamic Range: 85 dB
- Current Sensor Power: 2 mA
- Operating Temperature: 0 to 40º C
- Dimensions: 200 mm (W) x 292 mm (H) x 396 mm (D)
- Weight: Approximately 5.2 kg
|
|
|
|
|
|
Intelligent vibration monitoring
The design of the OneProd MVX system is based on 2 simple principles resulting from over 15 years’ experience in the permanent monitoring of industrial machines:
•Multiple measurements are useless if the operating conditions of the machines are not known;
•All measurement channels must be acquired and processed simultaneously in order to analyse machines with variable speed or intermittent operating.
Operators using many online current monitoring systems are faced with quasi permanent alarms. This comes from the fact that the operating conditions of the machines change, whereas measurement settings remain the same.
With the OneProd MVX system, not only are the operating conditions of the machines taken into account (speed, load, etc.), but data processing is also suited to these conditions. A real monitoring strategy is then implemented for outstanding quality and reliability of the information.
OneProd MVX includes 8 to 32 measurement channels and now allows integrating vibration analysis to electrical analysis based on the additional transducers and solutions of OneProd System (see OneProd ESA data sheet).
|
|
|
The Adash 3600 system is an on-line vibration monitoring system, which is intended for process control and reliability systems, machinery protection systems and generally for all the applications concerning the maintenance and monitoring of machinery condition. Thus, a large variety of applications are possible for motors, fans, pumps, gearboxes, small turbines, bearing diagnostics etc.
|
|
Vibra-Metrics built the patented Sensor Highway (Pat.# 5,255,565) to provide plant managers with a low-cost, modular solution for achieving advanced on-line monitoring of critical equipment parameters such as vibration, temperature, pressure, and almost any other parameter. It also holds the key to success: better Return on Investment. Companies must get substantial benefit from predictive maintenance (PdM) cost outlays, especially the expenditures for equipment monitoring. The Vibra-Metrics' expandable Sensor Highway System offers advantages over traditional predictive maintenance programs such as increased data collection frequency, more repeatable/accurate data, easier trending analysis, and more efficient use of your PdM Staff.
The bottom line: a PdM system like Sensor Highway can return up to five time the investment in a short period of time.
|
|
|
The Adash 4201 instrument is a portable, fully digital balancing and vibration analyser with the possibility of on-line measurements and data storing. It is intended for identification of bearing condition, lubrication and mechanical defects of the whole machine. It enables to apply diagnostics at the level of measurement overall values, FFT analyses and time signal measurement. Its equipment enables not only detection of occurring defects but also their detailed analysis and precise specification. It can also be used for single and two plane machine balancing and for run-up and run-out measurements. The analyser is characteristic by its very easy operation. If used with the DDS 2007 database and expert system, it is suitable for both experienced users and beginners. Also is possible to use simple A4000Download software. If used with the MDS 5.00 user software, it enables to evaluation the machine deflection shapes.
|
|
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
SmartBalancer2 – Avoid unbalance in your business
Over 50% of all problems, faults and breakdowns of machinery are directly or indirectly attributable to unbalance of rotors. This causes premature wear of the bearings, fatigue fractures and catastrophic failure or to shaft deformation. This puts your operating personnel at risk, and can result in unexpected breakdowns of machinery and systems.
Profit from the complete field balancing package
The SmartBalancer2 is a practical aid, which thanks to its comprehensive diagnosis tools, quickly gives you an overview of the state of balance of your machinery and systems. This handy, battery operated device enables rotors to be balanced quickly, cost effectively and accurately in the installed condition – in one and two planes, i.e. statically and dynamically.
|
|
Vibrometers / Balancing Instruments
MinIbalancer MI 2100
The MinIbalancer MI 2100 by Hofmann is the state-of-the-art field balancing instrument for balancing rotating machinery in one or two planes under operating conditions.
Features:
Designed for field balancing in one or two planes
Best balancing results thanks to simple, clearly structured operation
Additional measurement of overall vibrations in order to detect unbalance problems
Measurement of the condition value of rolling bearings (option)
Balancing protocol directly to external printer (option)
Handy instrument body with fold-out stand
Application:
Field balancing on site
Balancing in production and assembly under field conditions
Measuring vibrations on bearings and machine housings
Determine overall or unbalance vibrations
Monitoring rolling bearing condition
Measuring rotational speed
|
|
Grinding Wheel Balancing Device
Easybalancer EB 3100
EB 3100 is a device for balancing grinding wheels under operating conditions in the grinding machine. The unbalance correction can be performed using two or three sliding weights.
Features:
Specially adapted to the balancing of grinding wheels
Simple operation for best balancing results and quiet running
Applications:
Field balancing of grinding wheels
Measurement of spindle vibrations
Measurement of spindle speed
|
|
Portable online monitoring system
With the OneProd-VMS portable system, all monitoring and diagnosis tools required for rotating machines are available in a suitcase suited for industrial settings. OneProd VMS integrates the OneProd MVX multichannel online monitoring system (see specific data sheet), a set of quick connections and non-interruptible power supply. Also, the system can accommodate a 15” pre-programmed laptop computer, as well as many accessories.
The OneProd VMS system is the ideal tool when a machine that is monitored on a periodic basis only reaches degradation phases that need to be closely followed up and understood.
OneProd VMS is also suited to the characterisation of temporary phenomena related to specific events or operating modes.
Quick to install, the OneProd VMS system is operational at once for complete maintenance diagnoses.
|
|
Adash A4300-VA3 is portable very modern construction one or two channel datacollector and analyser, 1 or 2 plane field balancer. Main features are small dimensions and weight (970 g), large LCD display with high resolution and powerful processor which provides fast data analysis.
Adash A4300-VA3 is determined for bearing condition analysis, lubrication analysis and analyses of mechanical defects of machines unbalance, misalignment, resonance, looseness. Enables to perform any of the FFT, order or time signal analyses. Instrument memory enables archiving of large amount of data. The most important feature is possibility of firmware upgrade via interface RS232. Instrument can work as datacollector or analyser and the switching between these modes is by one button push. There are implemented special methods for measurement of bearing condition, where is low speed bearing included. With software system DDS 2007 is A4300-VA3 instrument very powerful weapon in predictive maintenance.
|
|
Complete Your Monitoring Program With a Reliable Portable
GE's Bently Nevada line features numerous portable instruments designed to measure and collect vibration and other machinery information as part of a predictive maintenance program, for field diagnostics, and for test stand use.
|
|
The T30 is a handheld multimeter for systematic machine condition monitoring as well as for fast spot checks on any rotating part. You can choose the price/performance combination most suitable for your requirements and upgrade at any time.
With the Basic version, measuring results are manually recorded. You measure:
rolling bearing condition (SPM®Method)
vibration severity (ISO recommended)
temperature and rotational speed
The Logger has the same measuring functions plus data logging in connection with the software Condmaster®. It also has a function for continuous recording, up to 50 hours with three transducers simultaneously. You can store comments and manually input any reading from other measuring devices.
In addition, the Expert version provides a powerful vibration analysis with FFT spectrum, fault symptom evaluation and individual presentation of five vibration condition parameters (EVAM®Method).
|
|
Bearing Checker - bearing condition at your fingertips
Small and lightweight, Bearing Checker is a unique instrument designed for swift, on-site condition monitoring of all kinds of ball and roller bearings.
By means of evaluated measurement results, maintenance technicians and mechanics can assess bearing condition and identify sources of potential machine problems without specialized training.
Bearing Checker makes a proactive approach to maintenance economically feasible for everyone. Provide your maintenance personnel with an easy-to-use, cost effective instrument for bearing monitoring.
|
|
Type 107B - A, V, S vibration meter, spectrum analyzer
800 lines FFT, logarithmic/linear view.
Charge amplifier with programmable sensitivity
(use any piezoelectric accelerometer with known sensitivity).
Frequency range 2...10000Hz.
Firmware update by user. Free Windows software ConSpect.
USB interface ("Mass storage device"). FAT16 file system. 2MB memory.
NiMH accumulator, charger. Aluminum casing.
Size- 110x60x30mm.
|
|
|
|
|
|
FastTracer
• Vibration triaxial analyzer
By positioning the FastTracer directly on the test point it is possible to acquire immediately the required information on the three axes allowing the operator to save time.
•USB portable
Plug and Play device with USB connection or wireless. Thanks to MEMS technology the sensor is highly miniaturized and it can be mounted on the most critical test points.
•Powerful and cheap
The acquired acceleration data are sent to the PC that then performs the data processing through the supplied software.This solution allows the full exploitation of the computation capacity of the PC by obtaining some advantages as fare as velocity,precision and costs of the product are concerned
•Real-time analysis in time and in frequency
The included software allows the operator to do real-time analysis both in time and frequency domain (acceleration, velocity, displacement, RMS). The user-friendly interface permits the analysis viewing in the most proper and flexible way
•Off-line and remote analysis
The data acquisition can be recorded in the PC and then investigated with the same interactivity of an online viewing or it can be easily transmitted via internet both in real time or through automatic reports in Microsoft EXCEL
•Accuracy and precision of measurements
An internal autodiagnosis system always ensures the correct working of the instrument by guaranteeing at the same time the precision of the effected measurements
•High flexibility with other software
The high adaptability of FastTracer in different fields has permitted a high grade of integration with the most common control systems (LabView, CVI, etc)
|
|
|
|
|
|
VL 8000 is a high-end field balancing instrument with advanced vibration measurement, vibration analysis and machine diagnosis features.
* Features
o Intuitive operation with Windows interface
o Clear presentation of results on very large colour LCDo Very wide speed range up to 300,000 RPM
o Systematic detection of damage through envelope analysis
* Functions
o Unbalance measurement in one or two planes
o Conversion of unbalance correction into practical balancing methods (e.g. drilling)
o Frequency analysis to determine the spectral components of a vibration
o Tracking analysis to capture the run-up or coast-down of a machine and to determine the resonances
o Envelope analysis to detect damage of rolling bearings or gears
o USB port to transmit the measurement values to a PC
o Offline PC software
* Applications
o Measuring vibrations on bearings and machine housings
o Field balancing on site
o Recording the condition of rolling bearings
o Observing and recording vibration levels
o Identifying frequencies in a vibration
o Detecting resonance points and identifying transfer functions
o Detecting machine damage
|
|
COUGAR Portable Dynamic Signal Analyzer
* 4 to 28 input channels with ICP
* Up to 51.2 kHz sample rate per channel
* Powerful distributed Digital Signal Processors
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
|
|
|
|
Vibrocontrol 1500
The new high-performance, budget-friendly solution for simultaneous measurement and monitoring of
• Bearing / casing vibrations
• Rolling-element bearing condition
• Temperature
at 2 measuring points on a machine.
Monitoring of bearing/casing vibration is done in accordance with ISO-Standard 10816. The actual measured values are displayed at the monitoring instrument. Any violation of preset limit values is visually displayed at the monitoring instrument and also signaled via the built-in relays for Alert and Danger alarms.
For determination of the cause of the vibrations, VIBROCONTROL 1500 has the functions
• FFT Analysis of bearing/casing vibrations
• FFT Analysis of the rolling-element bearing condition
Up to 63 VIBROCONTROL 1500 instruments can be networked. Setting of the instruments’ parameters, visualization and assessment is possible both locally and through the Internet.
The condition of the machine can also be interrogated online via www from any PC. Naturally observation of the vibration Trend or Vibration analysis is also possible through this connection.
|
|
|
Robo®Control detects the absence of machine specifications at the component and conveys these to a central computer. There the data are processed and they are made available to the clients through internet. Robo®Control is used in order to control the behavior of one construction. For instance, this is necessary in regions with risk of earthquakes or settlement.
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
The Ultraprobe 9000 Kit Complete is a digital ultrasonic inspection, information storage and retrieval system that is so versatile, so easy (most operators are able to use the Ultraprobe 9000 within 15 minutes) and so much fun to operate, you'll be looking for opportunities to use it every day.
Open Platform Software
Interchangeable Modules
Frequency Tuning
Spin and ClickTM Technology
120 dB Dynamic Range
400 Memory Locations record: dB, Frequency, Time, Date, Text, Operation Mode & More
Acoustic Isolating Headphones
Environmentally Friendly Rechargeable Batteries
Superior Application Support
Easy interface for most Vibration Analyzers including: SKF, ENTEK, DLI, CSI, DI
Developed by the Industry Leader in Airborne Ultrasound
|
|
|
|
Machine condition monitoring, Vibration analysis
