|
|
|
|
|
|
The WCA mini AD3661 - It goes where you go- Portable 4-channel Noise & Vibration Analysis System
- USB bus power unit
- 24 bit, 4-channel measurements
- A channel exclusively for tacho pulse measurements
- WCAPRO (multi analysis software)
- FFT analysis and real-time octave analysis
- Tracking analysis and throughput recording/playback
- Equipped with WCA Lite (easy-to-use analysis software)
* Configuration
Standard configuration
- AD3661 Hardware (size: 30(H) x 139 (W) x 138(D) mm, weight: 330g,
including UBS cable and power adaptor)
- WCA Pro software and license for basic FFT analysis
* Options for WCA Pro software
2D tracking license
3D tracking license
Real-time Octave analysis license
Time-series filtering license
[Features]
A portable and lightweight, USB bus powered unit
The WCA mini is small and light enough to fit into your travel case. Its actual size is Height 30mm (height) x Width 139mm x Depth138 mm (width), and weights is only 330g. Power can be supplied from athe USB bus, allowing you to perform noise and vibration analyses anywhere.
User-friendly GUI and WCA Lite with improved ease of operation
With enhanced operability, the WCA mini has adopted the same design concept employed in the highly reputed WCA. WCA Lite will enable simple operation of FFT and tracking analyses.
Complete compatibility with the CompactWCA/WCAonPC
A compatible user interface eliminates the need for additional training of existing users.
WCAPRO, multi-analysis software
WCAPRO provides real-time FFT analysis for noise & vibration testing.
Please see the AD-3661 catalog for further details.
|
|
NetdB: Control of noise and vibration sources
With V1.5, the latest version of its firmware, NetdB allows for the generation of an infinite range of signals on its analogue and digital output channels.
Well beyond the standard capacities of equivalent acquisition front ends available on the market (fixed-frequency sine, swept sine, burst, white/pink noise), it can also be used to generate MLS sequences, to apply real-time filters on inputs and redirect them to output channels and to generate any type of signal from a wav file.
NetdB makes it very easy for you to control a vibration excitation bench, a loudspeaker, headphones for Jury listening, etc., i.e., any excitation or signal restoration system regardless of your application field.
|
|
Advanced Diagnostics in a Portable, Expandable Package
Not all data collection systems are created equal. With thousands of users around the globe, ADRE PDS's are trusted by machinery professionals in a wide variety of industries for their most advanced diagnostics requirements. ADRE truly is the diagnostic product that customers across industries trust for their diagnostic and data collection needs.
Synonymous with quality and advanced technology, ADRE leads the way.
|
|
|
|
|
|
RogaDAQ 16 datalogger Description:
With the introduction of the RogaDAQ16 USB2.0 data acquisition system, a new age of measurement technology begins.
USB 2.0 / 480MBIT (USB1.1/12MBIT COMPATIBLE)
16 analog input channels (16bit/500kHz max.)
IEPE sensor supply (24V/4mA)
0.125V to 10V input range
Individual preamplifiers
4 analog output channels (16bit/100kHz)
Powerful DSP (255MIPS) for filtering, control etc.
24 digital I/Os
Optional 24bit counter, timer, PWM, incremental encoder
Free drivers for major application software
including DASYLab; LabView & DiaDem drivers & RogaRec Software; FlexPro7 Standard
The RogaDAQ16 is an affordable multichannel IEPE solution. The USB 2.0 interface permits unrivalled portability. Hotplugging the data acquisition unit during operation has now become a reality. The compact and rugged measurement unit with its BNC connectors breakout boxes obsolete. Downward compatibility to USB 1.1 also permits to run this high performance measuring system with older hardware. Simplicity of integration, whether mobile or stationary, has reached a new level.
|
|
|
2 channel USB sound card with IEPE sensor supply. It can be used for noise and vibration measurement.
|
|
VC-2100 - Vibration Comparator
Our line of vibration comparators can serve as your vibration "watchdog" in a wide range of situations in which vibration based judgments must be made, such as in go/nogo vibration testing of products, facilities diagnosis and machine tool cutting tool damage.
Features:
- Simultaneous two-band measurement.
- Digital display function.
- Analog output.
- Headphone output.
- Comparator gate.
- Comparator time delay setting.
- Compact 96 x 96 (DIN) size.
Specifications:
- Number of Input Channels: 1
- Input Range: 0.1 to 50000 m/s2
- Number of Settable Bands: 2
- Measurement Modes: Rms, Peak, Maximum hold, Peak hold
- Output Modes: Analog output, Headphone output, Cal signal output, RS-232C output, Over output
- Comparator Function: Judgements made independantly for each band
- Operation Temperature: 0 to 50º C
- Dimensions: 96 mm x 96 mm x 112 mm (DIN)
- Weight: Aproximately 500 g
|
|
|
|
|
|
SIR-3000 Series
Raid One Data Acquisition
The robust new SIR-3000 series recorders from Sony are a redundant, secure, customizable and networkable solution for today’s critical sound and vibration data acquisition requirements. The dependable new recorders limit the potential of having to repeat critical, difficult or expensive tests due to data acquisition failure.
The SIR-3000 Series features hot swappable, front mounted dual hard disk drives to protect valuable data in a RAID One array. The redundant high capacity 200GB drives insure high volume tests are accurately captured each and every time without the worry and expense of a drive or media failure.
Regardless of the sampling rate, the system accurately records data to the redundant hard disk drives at a 12Mbps recording rate. The test engineer can have direct access to specific data during post processing with the elimination of the need to wind and rewind the tape.
Sony has included data security features including a built-in Nickel metal-hydride battery back up for both main AC and DC power sources that provides an orderly shutdown to prevent data loss. The drive is also key lockable and can be quarantined for maximum-security.
Recording channels can be expanded up to 128 channels with additional units for data input. Two measuring unit options are also offered: the SIR-3032i with a sampling frequency of 48kHz(20kHz) or the SIR-3032W with a 192kHz(80kHz) sampling rate to further customize the system.
|
|
Timken has a broad offering of condition monitoring products and services that includes portable instruments, continuous monitoring devices and online systems.
These products and services can help maximize uptime with the development of cost-effective solutions to achieve maximum output and reliable service.
Increasing the useful life and productivity of your machinery directly impacts the bottom line.
|
|
Timken has a broad offering of condition monitoring products and services that includes portable instruments, continuous monitoring devices and online systems.
These products and services can help maximize uptime with the development of cost-effective solutions to achieve maximum output and reliable service.
Increasing the useful life and productivity of your machinery directly impacts the bottom line.
|
|
- The main use of the instrument is in lubrication replenishment process.
- The instrument measures the actual lubrication level of a bearing and tells the operator when the amount of added lubricant is ideal.
- It ensures that bearings are not under or over lubricated.
- Use of this instrument decrease lubricant consumption and machine maintenance cost.
- It also display the bearing condition value.
- Built-in Stethoscope.
- Simple operation.
|
|
Vibration Supervisor DMM-4000/TGV
These field mounting devices consisting of sensor and specific transmitter prepared for preventive control of vibration in bearings of heavy machinery by means a trending system activing alarms according several criterium. These models transmit RS-485 Modbus and 4-20 mA signal proportional to the vibration speed. Optionally can transmit by Radio, Ethernet cable or WiFi.
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
The Ultraprobe 10,000 brings Ultrasound Inspection technology to a whole new level. With this one system, inspectors can perform condition analysis, record sounds, store and manage data.
With the push of a button, it is now possible to record a sound sample directly into the instrument and link it to one of 400 record files stored in the Ultraprobe.
Specialized Application Screens
Adjustable On/Off Features
Connect to External Devices
Flexible Reporting Options
|
|
VIBRATION INSTRUMENTATION & CONDITION MONITORING
a) VIBRATION MONITORING
A range of vibration meters such as the MV 100, MV 200, MV 400, MV 410 (B) etc. are available to measure vibrations. The MV-410 (B) is specially suited for evaluating the condition of bearings in actual operations besides vibration measurement.
A range of vibration analyzers like MV 306, MV 310, MV 320 etc. are available for vibration analysis ( frequency analysis) in addition to vibration vibration measurement. Field balancing can be done with a vibration analyzer by the use of stroboscope.
|
|
The VIBROCONTROL 6000 Compact monitor initiates a new period of vibration measuring and machine condition monitoring.
It is exactly adapted to the specific requirements of the machine to be monitored. Standard monitoring, if necessary, but also diagnostic monitoring, if needed.
Our huge application library offers you a great number of already practised solutions. Should this be insufficient to fulfil
your requirements, our application engineers will work out the optimum machine protection for your precious
manufacturing facilities.
|
|
Ultra-portable Vibration Monitoring
- Weighs less than 0.4kg
- 4 Analogue channels/housing
- 1 Tachometer Input/housing
- 1 Analogue output/housing
- Up to 52kHz per channel
- Synchronous across all channels
- AC, DC, and ICP inputs
- USB Interface
- 106dB SNR
- Multi-unit operation
The new ultra-portable data acquisition system providing dynamic data capture for a wide range of field and mobile or test facility applications.
Four Analogue input channels plus Tachometer and Analogue Output per housing.Versatile self-contained solution with data streamed to a laptop or other PC via USB. Synchronous 24-bit ADC per channel provides wide dynamic range with 25.8kHz bandwidth.
Synchronization between units ensures Mosquito offers modular expansion to meet your larger channel-count requirements.
|
|
Electrical Diagnosis Solutions
OneProd ESA offers the unique integration of electrical analysis into vibration analysis, for full monitoring of electrical machines. The OneProd ESA (Electrical Signature Analysis) system implements permanent electrical analysis, and allows for reliable monitoring and diagnosis of electrical motors, their electric power supply and driven machines.
With voltage and current transducers associated with an electrical interface unit, OneProd ESA can integrate the OneProd MVX acquisition system (see specific data sheet), the data of which are processed by the OneProd XPR software (see specific datasheet).
The system can be implemented quickly, due to the large database on electric motors available, and the automatic diagnosis feature offered by OneProd ESA can also help the user to get started.
|
|
|
|
|
|
Innovative hardware
The compact diagnosis system efector octavis evaluates vibration signals using the methods of frequency analysis. The system uses a micromechanical acceleration sensor. Data can be collected, processed and evaluated decentrally with no expert know-how required.
Continuous monitoring
efector octavis is designed for the early detection of rolling element bearing damage or unbalance. Continuous monitoring offers a reliable and cost-effective solution as compared to intermittent methods.
The unit type VB1001 monitors up to two different objects. The unit type VE1001 can monitor up to five different objects or 20 individual frequencies. An object is defined as a rolling element bearing or a shaft. With efector octavis permanent vibration monitoring is no longer a question of price.
The integrated expert
Acoustic emission is detected, the frequency spectrum is calculated and e.g. the rolling element bearing state, the unbalance etc. are evaluated. The condition can be directly read on site and is signalled by binary switching outputs. The switching signal can be transmitted via unscreened cables. Connection to bus systems
is possible.
|
|
Machine condition monitor VibroGard-R 1500
The compact vibration and rolling bearing monitor VibroGard-R 1500 is used for low cost monitoring, i.e. on electric motors, fans or pumps. Different operating conditions (e.g. idle operation and load) can be considered. The measurement values are stored in the device and can be evaluated using a PC.
Features:
Data storage in the device
Monitoring of various condition and process values
Setup via PC
Data acquisition for trend analysis on PC
Data export via serial port or memory card
Optional networking via CAN bus or Ethernet
|
|
VIBROCONTROL 6000 Compact monitor
Continuous and high-level productivity requires security for machines. Unlimited machine availability and uptime is the primary factor to guarantee trouble-free, predictable productivity.
VC-6000TM compact monitor- a new and revolutionary generation of on-line monitoring and diagnosis systems; and "smart" accurately describes the concept. These instruments adapt easily and exactly to a monitoring requirement, using some truly unique sets of features.
- Off-the-shelf, customised configuration
- Stand-alone or plant-wide concept with PC interface
- Cabinet or on-the-machine mounting
- Safety and diagnostic monitoring
- Extendable, multi-faceted modularity
|
|
|
|
|
|
VIBROCONTROL 4000 offers optimum protection through permanent
condition monitoring.
This means:
• Acquisition of current machine condition through continuous measurement
of relevant condition and operating parameters
• Recognition of deviations from the desired condition
• Alarming at violation of limit values
• Plant shutdown when dangerous conditions exist
• Communication with control systems
VIBROCONTROL 4000 meets all important requirements of internationally
recognised guidelines such as API 670 and DIN 45670
Measured values are processed and compared with adjustable limit values in the individual monitoring modules of VIBROCONTROL 4000. 4 limit relays are available for each module for alarm signalling. In addition to the general customary limit values for pre- and main-alarms, in this protection system the measured values trend is also monitored. Unexpected sudden changes in the measured value which indicate abnormal behaviour initiate a trend alarm and thus permit an extraordinary level of sensitive monitoring
of the machine condition.
|
|
A Perfect Blending of Compact Size and Multi-function Ability
These self-contained monitors are designed to address essential and balance-of-plant (BOP) equipment assets that require continuous machinery protection but do not warrant the cost of larger, more sophisticated rack-based monitoring systems like the 3500 Series. 1900 monitors provide a simple and cost-effective way to apply machinery protection on selected machines or points. They are designed to operate as stand-alone units, or in conjunction with our Trendmaster® Pro on-line condition monitoring system.
|
|
MODSTAR
It is a digital triaxial accelerometer that can be integrated in the control chain of any systems in the industrial automation.
Thanks to the ModBus communication it can be connected to the most common industrial communication protocols and therefore it always gives some information about the vibrations on the three axles.
Thanks to the high reliability and the low costs it is suitable for the integration for OEM and the mass installation.
Modstar differs for:
- absence of periodical calibration
- small dimensions and simplicity of installation
- configuration libraries to be associated to the product (VI for NI LabView, DLL for software based on Windows, ….)
|
|
VibroGard-M is the cost effective solution for monitoring the condition of machines such as fans, pumps or compressors. The VibroGard-M modules are combined to form task-specific module sets.
* Features
o Standard module for all common monitoring tasks
o Factory calibration for precise determination for measuring values
o Current and voltage output for condition evaluation
o Limit contact module for pre and main alarm with alarm delay
o Standard interfaces for transducer
o Prepared for DIN rail mounting
|
|
The TechnaGuard modules offer customers a new means of protecting their expensive machinery at a low cost. By using the motor as a means of measurement, TechnaGuard has the versatility to be applied to almost any application with an AC motor.
What TechnaGuard can do for you:
The compact size, low cost, and digital technology of TechnaGuard give it a distinct advantage over other means of machinery protection.
With simplicity in the design, TechnaGuard is a simple plug and protect product.
TechnaGuard has the ruggedness to be exposed to the harsh plant environments.
As machinery and/or motors wear energy consumption increases. As energy costs rise, the TechnaGuard becomes an efficient and inexpensive way to keep these costs in check.
|
|
|
|
|
|
Intellinova combines complex measuring techniques and advanced data processing with a user friendly interface and an array of options for individual system customization. The result is a highly flexible, high performance system delivering easily understood condition information straight to the control room.
The system is robustly designed in every aspect. The hardware is sturdy and well suited to harsh industrial environments and long-term use. Software components have been carefully designed and selected to create a system for the future, with ample opportunities for intersystem communication.
The Intellinova system is centered around the Commander Units, each unit serving up to 32 channels for shock pulse, vibration and/or analog measurement in a user defined combination. A dedicated communication software triggers, controls and filters measurements and data, and handles all messaging between the database and one or more Commander Units.
Intellinova is a workhorse and the ideal online condition monitoring solution for standard and high-demanding industry applications.
|
|
Our product line offers four different monitoring systems (3500 Series, 3300 Series, 1900 Series, 1701 FieldMonitorTM Series ) capable of doing continuous on-line monitoring for the protection and condition monitoring of your varied machinery assets. From our flagship 3500 Series, to our newest system, the affordable 1900/65A General Purpose Machinery Monitor, we have a monitoring system for every industry and every machinery asset.
|
|
Hydrosteel 7000 is a fixed, totally non-intrusive device for the continuous monitoring of hydrogen flux at high criticality sites within petrochemical and gas production and petrochemical refining operations.
Hydrogen flux measurement relates directly to active sour and HF corrosion at <100 °C, and any acid corrosion (e.g. sulfide/napthenic acid) at higher temperatures, and is designed for fixed monitoring on steel surfaces subject to these corrosion scenarios, such as in sour gas wells, lines, storage facilities and treatment plants, amine and alkylation units, distillation columns, outlets and heat exchangers (NAC), and cracking unit overheads.
|
|
|
|
|
|
RPR-CONTROL-100
ELECTRONIC PROTECTION
is the efficient monitoring system for
centrifugal pumps of up to 20kW.
Electronic monitoring of motor currents protects the pump from dry running, overheating and overload.
If the above mentioned operating states are not absolutely impossible with your installation, you should use an electronic process monitor to switch off the pump before it is damaged. Such monitors will not only avoid damage to the pump, but also downtime and costs resulting thereof. At the same time, the monitor checks the pumping process for the set delivery rate. Once the cause of a malfunction is eliminated, the pump is immediately ready to continue operation. The process monitor is easy to install into the pump’s power supply unit. As it is not necessary to build it into pipe runs, this process monitor also is ideal to retrofit existing installations.
FUNCTION
An overload controller with analogue output monitors the actual
power of the pump motor. There are four switching thresholds defined:
• dry-running (fault, the motor is switched off);
• overheating (fault, the motor is switched off);
• overload (fault, the motor is switched off);
• filter contaminated (warning).
The switching thresholds are user-programmable.
Also included is a real-time clock with elapsed-time meter, e. g. to monitor maintenance intervals.
|
|
|
|
|
|
The FAG Detector II is the ideal vibration analysis introductory device. The hand-held measuring instrument weighing approx. 450g is user-friendly and very easy to operate. And the best: the value for money is just unbeatable. The FAG Detector II is a vibration measuring device and a data collection device in one. Machine damage is detected early and remedied. This avoids unforeseen shutdowns as well as expensive consequential damage.
How exactly does the FAG Detector II work?
Vibration signals are detected via a sensor. The FAG Detector II calculates the RMS values (root-mean-square values) of vibration speed and acceleration (so-called characteristic values) from the vibration signals. The characteristic values are evaluated by means of a computer with the aid of the "Trendline" PC software.
Who is able to operate the Detector II?
Great, if you already have a basic knowledge on vibration analysis. But: You don't have to be an expert in order to operate the FAG Detector II. Even staff without knowledge in the area of vibration analysis can quickly learn how to handle the device. We offer training courses in which you achieve the knowledge neccessary.
Version Detector II
The device in version II has the following features:
- Filing up to 24 time signals by memory of 256Kb
- In memory of 1MB 114 time signals can be stored up
- Temperature measurements (from - 15 °C to 250 °C)
- Email button: If this button is hit data can be forwarded to a vibration analysis expert
- Calculation of frequency spectrums
|
|
|
|
Machine condition monitoring, Vibration analysis
