|
|
| Products 151 to 180 of 373 |
Coding: ME657
Pressure: 350 Bar
Pressure Measurement: Gauge
Technology: Piezoresistive
Diameter: 12.85 mm
Structure: Monolithic
Thermal compensation: YES
Signal converter: NO
Signal output: Differential signal
|
|
|
Omron's comprehensive offering of Sensors is also complemented with a family of pressure sensors that offer not only simplicity of use, but also with the flexibility and combination of functionality, usability combined with compact size. Ranging from mini-cube style sensors to high precision sensors, Omron is also able to offer multi-channel pressure sensing solutions.
|
|
These pressure transducers use the Series 10 OEM pressure sensor fully compensated and calibrated for operation at 10 VDC.
The well proven core sensor is an integrated silicon strain gauge bridge, encapsulated within a stainless steel case with a welded, isolating diaphragm (for a more detailed description, see data sheet for the Series 10).
A G 1/4" male pressure port is welded as standard to give the very best in media compatibility and integrity - no "O"-rings or silicon are in contact with the media at all.
Class 0,25% / 0,5%.
|
|
|
|
|
|
Measurement Specialties oil-filled stainless steel pressure sensors are suitable for use in harsh environments of liquids or gases. Many feature proprietary UltrastableTM piezoresistive silicon die technology for long-term reliability.
The Model 154N Low Pressure is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 154N Low Pressure is designed for o-ring mounting and OEM applications requiring compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The Model 154N Low Pressure is designed for high performance, low pressure applications. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser-trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%. Please refer to the Model 154N UltraStable™ datasheet for information on products with operating pressures greater than 5psi.
|
|
|
|
|
|
General description :
Features
* Suitable for hygienic applications
* High accuracy
* Long term proven reliability
* Rugged construction
* Simple installation and set-up
* Standard and bespoke units
* Pneumatic systems for hazardous areas
* Liquid and slurry continuous level measurement
* Continuous pressure monitoring
Level Control
Industry's requirements for level and pressure measurement are as varied as industry itself. Finding a system which can cope with that wide scope and do it accurately, safely and with absolute repeatability is one of the key tasks facing today's process manager. With hazardous products and harsh environments to handle, perhaps requiring intrinsically safe equipment, one of the main factors in choosing a level/pressure system must be its reliability and toughness.
Efficient Level Measurement Solutions
For industry to benefit from the installation of level measurement systems, the selected system must be reliable, repeatable and accurate. In addition, it should be installed quickly, with a minimum of costly down time and it should provide an interface with data acquisition and control equipment.
By employing equipment that satisfies these criteria companies can increase both their efficiency and productivity. However, with so many different techniques to choose from, selecting the best method for your application is difficult.
We at CT Holledge, with our range of pneumatic and electronic pressure sensors, will assist you through the minefield of system selection and supply you with equipment that not only meets your requirements but exceeds them.
|
|
There is no easier, accurate, recording pressure system!
The DataloggerXP software*, in tandem with the XP2i digital pressure gauge, forms an integrated data logging solution by collecting, saving and transferring data to a Microsoft Excel spreadsheet. With the XP2i's long battery life, you can record up to 6000 pressure measurements for three months, without the need for external power supplies or battery replacements. Since the XP2i can measure vacuum, you can even capture pressure to vacuum transitions and much more.
Evaluate data graphically. Ideal for field calibration, chart recorder replacement, pressure safety valve (psv) testing, pipeline static pressure testing, leak testing and wellhead monitoring.
*Compatible with Windows 2000, XP and VISTA
|
|
|
Electronic Pressure Transducer to 1000 bar gauge, variety of measuring ranges, very compact construction
|
|
|
DMS, STRAIN-MATETM or piezoelectric technique: we control technologies, the processes of measurement and their integration to solve your specific applications of force, pressure or deformation. Used in hydraulic and pneumatic applications or in laboratory, our robust pressure pick-ups measure with the highest precision, even during their use in the industrial environments hardest. All the range of our pressure pick-ups is deliverable with connections and output signals frequently used or specific execution.
|
|
All-Fluid Sensor
Universal pressure sensor SDET for monitoring a wide range of gaseous and liquid media
Flexibility: pressure monitoring for a wide range of media, resistant to water and oil
Stable stainless steel housing, media-resistant fluoro-rubber sealing ring and ceramic sensor based on thick-film technology
Fast installation, thanks to standard interfaces and easy linking of the mounting attachments
|
|
A New Generation of Pressure Transmitters
As a leader in the pressure measurement field, FUJI ELECTRIC has achieved an installed base of about 500 000 FCX transmitters throughout the world. Thanks to its experience, and in order to satisfy the users demand, FUJI ELECTRIC has developed two new products:
The FCX-AII series, aiming at high-accuracy and excellent performance, and the FCX-CII series, featuring compactness and low-cost operation.
Each of these series offers a wide measuring range and a full variety of options so that the most applicable model can be selected.
|
|
_ LEVEL TRANSDUCERS
_ LEVEL SENSORS
_ PRESSURE TRANSDUCERS
_ PRESSURE SENSORS
Capacity until to 5.000 Psi.
Operating temperature from -40°C to +85°C
Escape 16bit or until to 10Vdc.
Precision 0.25% FSO.
Formats are for assembly on card that not
|
|
|
|
|
|
Our manufacturing capability offers our valued customers the option of choosing from our plethora of standard Pressure Sensors with capacities ranging from 29 psi to 36,000 psi.
FUTEK is not limited to our standard products; we SUPPORT our customer’s needs to either modify our standard Pressure Sensors or offering a complete custom design.
FUTEK signature Pressure Sensors generally provide:
-Stainless steel construction for durability in fluid/rugged environmental factors and titanium construction for extreme environments
- Lightweight to Ultra-lightweight designs as low as 6 grams for maximizing handling and minimizing weight constraints.
-Miniature flush mount option Pressure Transducers make for added flexibility and ease of mounting.
-Optimal long term stability Pressure Sensors having a nominal 2 mV/V output with options containing unamplified, amplified, and digital output.
-Great handling capabilities of both liquid and gas Pressures with safe overloads to 150% of capacity.
-Flame resistant designs coupled with Wide Frequency response bands and high resistance to vibration/shock.
-High Temperature Pressure Sensors may withstand extreme Temperatures ranging from -58 deg. F to 572 deg. F.
|
|
Model 101A
General purpose ICP® pressure sensor, 100 psi, 50 mV/psi, 3/8-24 mtg thd with Jamb Nut, ground isolated
Measurement Range: (for ±5V output) 100 psi (689 kPa)
Sensitivity: (±10mV/kPa) 50 mV/psi (7.3 mV/kPa)
Low Frequency Response: (-5%) 0.5 Hz
Resonant Frequency: >=250 kHz
Electrical Connector: 10-32 Coaxial Jack
Weight: 0.39 oz (11 gm)
|
|
Pressure Sensors with Ceramic Elementfor relative pressure measurement
- good value
- linearity <0,5 %of full scale value
- 2-fold overpressure-safe
- high temperature resistance
- no mechanical ageing or creepage
- no filling liquid necessary
Functional description
The series DSK pressure sensors are precise, temperature-stable but nonetheless good value units for measuring pressure in liquids and gases.
A new type of ceramic sensor forms the core of these units.It consists of a thin aluminium oxide diaphragm, on the rear side of which thick-film resistors are fitted in a Wheatstone bridge circuit.For stabilisation purpose, this diaphragm is connected to a thicka luminium oxide baseplate and is mounted in an appropriate casing with threated connections.
|
|
Pressure sensors and level measurement
Pressure Transmitters from VEGA: our pedigree is borne from the demanding requirements of tens of thousands of hydrostatic pressure based, level installations. In this application linearity and accuracy has to perform throughout the measuring range and a sensors’ performance is constantly monitored against contents and level readings. VEGABAR pressure transmitters also have a range of approvals and designs for chemical, marine, food and pharmaceuticals available.
|
|
|
The ifm pressure sensors are based on a ceramic measuring pressure cell which converts the measured quantity of pressure into a capacitive signal as a result of the deflection of a diaphragm. A microprocessor controls the evaluation of the electrical signal. For the efector 500 the system pressure is directly indicated on the unit by an LED display.
|
|
|
|
|
|
The P356 gage/differential pressure transducer is designed for pneumatic controls, filter monitoring, tank level, and leak detection applications requiring long-term stability and operational life in excess of 10 years.
Available in pressure ranges of 0 – 0.5, 0 – 1, ±1, 0 – 3, and 0 – 5 PSI, Kavlico's P356 provides an amplified voltage output of 0.5 through 4.5 Vdc from a 5 Vdc regulated power supply.
Featuring a brass housing and excellent EMI protection, this device has a response time of <10m sec and an operating temperature range of -20°C to +125°C. Built-in reverse polarity and over voltage protection allow for ease of installation while excellent hysteresis, repeatability, and linearity provide accurate measurements.
The P356 is packaged for high volume applications requiring a rugged, compact design while offering flexible configuration options for application-specific requirements.
Key to the sensors’ high performance and low cost is Kavlico’s ceramic, variable capacitance sensing element and integral ASIC with hybrid circuit for reliable signal conditioning.
|
|
|
|
|
|
Measurement Specialties is an industry leader for the breadth and quality of its pressure sensors, which include pressure transmitter components and pressure transducers. Using multiple technologies, we offer a range of pressure sensors that can measure from inches of water up to pressure transducers that can measure greater than 30,000 PSI. Measurement Specialties pressure sensors are used for a range of diverse applications in industries such as medical, aerospace, transportation, general industry, and test and instrumentation. Pressure sensors can also be delivered as a MEMS silicon pressure die for very small embedded applications.
Dual In-Line Pressure Sensors
Measurement Specialties’ dual in-line pressure sensors are calibrated, temperature compensated, and mounted on a reliable ceramic substrate in an industry standard 0.600 inch lead spacing. These sensors utilize piezoresistive silicon MEMS technology making them suitable for applications that use non-corrosive dry gases. Pressure ports are offered in metal tubes or ceramic barbed ports.
|
|
Coding: ME703
Pressure: 0,06 .. 20 Bar
Pressure Measurement: Gauge, absolute
Technology: Capacitive
Diameter: 32.40 mm
Structure: Membrane
Thermal compensation: NO
Signal converter: YES
Signal output: Frequency
|
|
|
With Pressure Sensors, changes in pressure can be measured to confirm suction, verify mounting, manage source pressures, and test for leaking. Differential Pressure Flow Sensors are also available.
|
|
Electronic pressure sensors are used to measure pressures in hydraulic systems. Function and design depend on the particular operating conditions. In order to meet these operational requirements, HYDAC offers a wide range of products from miniature pressure transmitters to customised multi-channel pressure switches.
Pressure transmitters detect the pressure and convert this into a proportional output signal.
Electronic pressure switches detect the pressure and switch a signal according to the pre-set parameters.
|
|
Differential Pressure Sensor PMP
Electronic Pressure Switch PDD
Pressure Transmitter with LED-display PDA
Pressure Sensor for harsh operational conditions PNK
Pressure Sensors Thin Film , Front-Flush Membrane SEN-33
Pressure Sensors with Ceramic Element SEN-8
Piezosistive Pressure Sensors, Internal membrane SEN-32
Digital Panel Indicators DAG
Plug-On Display AUF
Hand-Held Pressure Gauge HND-P
Universal Bussystem KOBUS
|
|
|
|
|
|
General description:
The DP3 series of pressure sensors offers a high-resolution, high-speed, and high-accuracy solution for all of your pressure sensing needs. A 2.5ms response time is achieved with excellent repeatability and temperature characteristics. A 10mm red LED display allows for good visibility in bright and dim ambient conditions. Simple key setup allows for quick initialization and threshold value settings. The display can be changed between six pressure units, allowing flexibility in many applications. The DP3 series incorporates 2 comparative outputs (NPN or PNP) as well as one analog output.
Several integrated output modes allow for enhanced usability:
- Hysteresis Mode
Offers free-range hystersis control for optimal hysteresis setting.
- Window Comparator Mode
This output mode provides a user determined pressure window in which the output is either ON or OFF. This is perfect for applications in which there are high and low pressure limits.
- Leak Test Mode
Utilizes both outputs to offer stable leak detection in applications such as bottle manufacturing.
|
|
FEATURES
1. Contains built-in amplification and temperature compensation circuit.
Circuit design and adjustment of characteristics are not required by
users.
2. High-level precision and high reliability realized.
• Overall accuracy is ±1.25% FS (Standard type)
• Overall accuracy is ±4% FS (Economy type)
3. Compact pressure sensor unit that saves space.
Same size and footprint (7.0 mm (W) x 7.2 mm (D)) as previous PS pressure sensor.
Example of pressure characteristics (ADP5140)
Drive voltage: 5V DC rated voltage; ambient temperature: 25°C 77°F
|
|
|
SMD’s Peerless engineering team designs sensors for unique requirements and aggressive cost targets. Typical specialized requirements include small sizes, high temperature, low capacities, “Cenelec” dielectric, and overload proof sensors.
|
|
Pressure Switch
P01909
Features:
• Inline Mounting
• Dial Indicator for Easy Pressure Setting
• 5 Amp Rated Snap Action Micro Switch
• Heavy Duty Aluminum Components
• Compact Size
• Din 43650HCM Connector
• IP65 Rated
• Field Adjustable 30-150 PSIG
• +/- 2% Repeatability
• Single Pole / Double Throw Switch
Pressure Switch
P01908
Features:
• Inline Mounting
• 5 Amp Rated Snap Action Micro Switch
• Brass Body
• Compact Size
• Flying Leads Electrical Connection
• IP65 Rated
• Field Adjustable 25-100 PSIG
• +/- 2% Repeatability
• Single Pole / Double Throw Switch
|
|
Pressure sensors for general application, for gauge pressure, accuracy 0.25% and 0.5%
Pressure sensors for general application are top of the range pressure transducers.
Their accuracy, reliability, resistance to corrosion and mechanical load make them suitable for all pressure measuring tasks - in production, development or in the laboratory.
The measuring ranges, graded in accordance with EN, range from 25 mbar to the maximum pressure range of 4000 bar. The case and wetted parts comprise stainless steel and are thus resistant to chemically aggressive media. The pressure connection and measuring element are welded together, making the measuring system particularly resistant to mechanical shock or vibration.
For more difficult measuring tasks (e.g. hydrostatic column), two potentiometers enable the zero point and measuring range to be set.
The pressure sensors for general application meet the electronic magnetic compatibility (EMC) requirements to EN 61 326.
|
|
|
Panasonic Electric Works offers two types of piezoresistive silicon pressure sensors, both with small size, good accuracy and excellent long-term stability; the PS-A model includes a built-in amplifier. Typical applications include gas, industrial and medical equipment.
|
|
The Amplified line of pressure sensors is based upon a proprietary package technology to reduce errors. This model provides a ratiometric 4-volt output with superior output characteristics. The sensor housing has been designed specifically to reduce package induced parasitic stress and strain. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure.
These calibrated and temperature compensated sensors give an accurate and stable output over a wide temperature range. Each sensor is internally compensated using an ASIC compensation technique. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like.
The output of the device is ratiometric to the supply voltage over a supply voltage range of 4.5 to 5.5 volts.
|
|
|
Kavlico's P250/P251 series of pressure transducers incorporate a stainless steel isolation diaphragm and all welded construction to withstand harsh industrial environments. Pressure ranges from 6 to 400 Bar or 100 to 5,000 PSI can be measured using a 5V power supply. The transducer provides a ratiometric 0.5 - 4.5V output proportional to applied pressure. The P250 is specified with pressure ranges measured in Bar and the P251 pressure ranges are measured in PSI. The rugged construction of the P250 allows it to be used safely in environments with large over-pressure spikes. The stainless steel diaphragm is compatible with most industrial fluids and gasious media.
|
|
|
|
Pressure sensors, Pressure switches
