|
|
| Products 151 to 180 of 272 |
| The Model DCT Industrial pressure transducer is designed for general industrial and commercial requirements offering excellent performance over a wide range of applications. This model is based on proven micro-machined silicon technology providing high reliability, long-term stability, and low cost relative to competing technologies. The introduction of the DCT brings a new level of accuracy to the AMETEK product portfolio. This product is offered in a variety of mounting and electrical output options, stainless steel or brass construction, and a wide range of pressures. It is offered in a millivolt output (ACT) or fully digitally (DCT)compensated for the effects of pressure and temperature change and calibrated to produce industry standard electrical outputs. |
|
The Ashcroft® KM10 features a proven polysilicon thin-film sensor welded to a stainless steel process connection. Other construction elements enable the Ashcroft® KM10 to achieve an ingress rating of IP67 for protection against the effects of weather, wash downs, and temporary immersion in water. Calibration, by digital signal conditioning, results in an extremely linear and repeatable pressure instrument. With pressure ranges available through 7500 psi, the Ashcroft KM10 offers equipment manufacturers a broad spectrum of choice in their selection of a durable, yet affordable manufacturer of pressure transducer. The unit's operating temperature range is –40/120 degrees C.
|
|
Alicat Scientific's line of P Series Digital Pressure/Vacuum Gauges offer customers a variety of cost saving features.
Alicat P series pressure/vacuum gauges are:
Precise Digital pressure/vacuum display offer more resolution and are easier to read than dial type gauges.
Versatile A variety of output options from 0-5V, 0-10V and 4-20mA as well as seamless integration with other compatible flow products on one RS-232 line.
Fast Quick response speeds show users the most minimal pressure/vacuum fluctuations.
Cheap to operate Low power consumption and minimal maintenance.
Rugged Standard 302SS flow body with aluminum case housing looks good and provides long service life.
Accurate and Repeatable Accurate to 0.5% of full scale and repeatable to 0.5% of full scale.
All Alicat P series manufacturers of pressure gauge calibrations are NIST traceable.
|
|
If Machine Pressure is Important to you, We've Got Your Sensor System
GE supplies special-purpose pressure detector solutions for use in applications such as combustor instability ("humming") detection on gas turbines, professional cylinder performance characteristics (P-V curves, rod compression/tension, suction/discharge pressure, etc.) on piston compressors, and early warning of professional seal failures on industrial process pumps by monitoring pressure across the seal face. These applications requires a transducer specifically designed for the pressures, temperatures, and cyclic stresses encountered in such harsh environments while delivering reliable machinery information.
|
|
- Accuracy: ±0.5% of full scale
- Range: refer to the Measure Range Table
- Power supply unit: 8 to 30 volts DC
- Output signal: 4-20 mA, 2 wires
- EMC compatibility: 80MHz - 1GHz
- Operating temperature: -40 to 105ºC
- Electrical connection: M12 & Mini Din connections, plastic
- Material of wetted parts: 316SS
- Process connections: ¼" NPT Male |
|
HBM suppliers of pressure transducers are used for measuring pressure in a wide variety of differing fields:
Hydraulic and pneumatic equipment
Fluid technology
Chemical and process plant
Oil drilling and recovery industry
Air-conditioning equipment
Food manufacturing
Construction industry
Absolute pressure, gauge pressure or differential pressure gauges are available to suit the respective fields of application.
Transducers are made of high-alloy stainless steels and are suitable for determining static and dynamic pressure in aggressive fluids or gases.
|
|
| Measurement Specialties produces a broad range of amplified output industrial pressure transducers for everything from high volume OEM use to high accuracy applications. Measurement Specialties proprietary Microfused™ pressure transducers are designed for OEM applications that require high reliability in harsh conditions. Measurement Specialties' high performance line includes Ultrastable transducers for instrumentation, foil strain gage transducers for severe environments and miniature transducers used for automotive and aerospace testing. |
|
Type 1000 I/P & E/P Transducers
Low Cost
Built-in Volume Booster
Small Size
Field Reversible
Low Air consumption
Mounts at Any Angle
Convenient External Span & Zero Adjusts
(Except for Explosion Proof Models)
Light Weight
Wide Supply Pressure Range
Low Supply Pressure Sensitivity
Product Detail:
The Type 1000 Transducer is an electro-pneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The Type 1000 accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM/339 slpm). Model selections include general purpose, NEMA 4X Type, extended range, high relief, intrinsically safe, and explosion proof.
|
|
| We offer a complete range of general purpose and specialist Supplier of pressure sensors for industrial and research purposes, including high line differential. |
|
| Dynisco has a wide range of Industrial Pressure detectors designed for the toughest pressure measuring applications in the worst environments. Applications include hydraulic, pneumatic, oil services, vehicle test stands, professional die casting, autoclave manufacturers, turbines, etc. Transducers are available with special pressure professional fittings, various electrical terminations, corrosion resistant alloys, varying outputs and high gain electronics. |
|
Industrial pressure transducer and Manometer Selection Guide
GEMS Pressure Transducer Units Deliver Top Performance and Value Under Pressure
Excellent Repeatability, Reliability
Pressure Ranges to 10,000 psi
Chemical Vapor Deposition/ASIC Technology
Gems Sensors provides the most stable pressure transducer and pressure switch sensors on the market today by combining advanced sensing technology with highly automated and revolutionary manufacturing methods. The result is a sensing element comprised of silicon, stainless steel, glass, and other metals joined on a molecular level to form pressure transducer units that are impervious to aging. If your application requires long life components, Gems Psibar® transducers are designed with you in mind. Psibar® pressure transducer units bring exceptional performance to a wide variety of applications across multiple industries
|
|
Suppliers of fuel cell Manufacturer of pressure transducers: Setra has been providing pressure transducers to enhance fuel cell performance for the past decade. The Setra 209, 225 and 230 offer stainless steel construction and high reliability in the low ranges required for today's fuel cell applications. Read more about the 209...
Industrial/OEM/ Pressure Transducers (Capacitance/Inductive): Setra's rugged industrial pressure transducers offer high accuracy and stability. Designed to meet the most demanding OEM applications, these transducers withstand up to 200g shock and 20g, 50-2000 Hz of vibration. EMI/RFI protection is included in many Setra products along with excellent thermal compensation over a wide temperature range.
Industrial/OEM Pressure Transducers (Stress gauge): Setra's line of high-performance, industrial strain gauge pressure transducers include submersible (for water level measurement) as well as general purpose type pressure transducers. Some models feature intrinsic safe options, range turndown capability for high overpressure applications, or Inconel wetted parts for corrosion resistance and maintenance free operation.
|
|
The force transducer works according to the principle of the pressure strength measuring. The force introduction is carried out in the direction of the longitudinal axis.
The force transducer has one for cylindrical form with a strain gage chamber. Its assembly and the ranges of application are supported by the use of different adapter with professional cylinder or screwing thread connections. The force introduction is appropriately labelled in the one application sketch. |
|
Ashcroft® low differential manufacturer of pressure transmitters provide unmatched, full-scale terminal point accuracy, including non-linearity, hysteresis and non-repeatability.
Types include:
*Ashcroft® Xldp - Durable, flameproof NEMA 2 stainless steel construction
*Ashcroft® IXLdp - Industrial NEMA 4X metal construction, FM approved for hazardous locations
*Ashcroft® RXLdp – Reduced size mounts inside a standard 3 1/2 " electrical box
*Ashcroft® DXLdp - Din track mount reduces footprint area 4:1…SpoolCal[TM] feature allows on-line verification and calibration
[Ashcroft DXLdp shown]
|
|
Single Manufacturers of pressure transmitters
Adjustable Range Pressure Professional transmitter - Series 637
Ranges from 3 to 300 psi (0.2 to 20 bar), ±0.25% Accuracy, Gas/Liquid/Vapor, 316L SS, NEMA 4
Adjustable Range Pressure Transmitter - Series 634ES
Ranges from 10 to 5000 psi (.69 to 344.5 bar), ±0.5% Accuracy, 316L SS, NEMA 4X
Digital Indicating Pressure Transmitter - Series DSGT
Ranges from 30" Hg to 20,000 psig, ±0.25% Accuracy, Optional Professional switch Outputs
Fixed Range Pressure Transmitter - Series 642
Ranges from 15 to 100 psi (1.03 to 6.9 bar), ±0.1% Accuracy, Gas/Liquid, 316 SS, 316L SS
|
|
Measurement systems using Endress Hauser's process pressure and differential pressure transmitters, with long-life ceramic measuring sensors, are the highly accurate and forward-looking alternative to conventional professional transmitters and manufacturer of pressure gauges with an electric output signal.
You can choose from a practical programme of systems for almost every task that involves pressure measurement. From the single measurement point to the interactive measurement facility with a connection to supervisory automation systems, we offer you the best solution. National and international approvals (e.g. EEx, ATEX, WHG, VbF, StEx, CSA, etc.) permit our systems to be used in all areas of application.
|
|
Industrial pressure professional transmitter
The PMP 1200 Series is a complete range of industrial pressure transmitters designed to optimize the relationship between price and performance while providing flexibility from a standard production device.
Applications include general purpose industrial, refrigeration, oil & gas well head monitoring and control, compressor specifications performance monitoring and static pressure measurements in flow applications.
Features & Benefits:
Ranges from 2.5 to 15,000 psig; 5 to 15,000 psia
±0.25% FS accuracy
Absolute and gauge format
NACE compatible with hastelloy C276 and 316L SS
Low cost, ex-stock delivery
Œ marked
UL/FM/CSA IS Class I, Div I, Groups A,B,C, and D
PTX 1240 Explosion-proof Class I, Div I
|
|
Compact and easy to integrate, the pressure transmitter GR is equipped with a ceramic cell being able to measure pressures going from -1 to 250 bar. It delivers a signal 4/20mA and is declined with cable output (IP67) or a interconnection DIN 43650 (IP65).
The professional transmitter GR type is dedicated to the integrators. The principal applications are the distribution of gas, water and the boilers industrial.
Available in version ATEX EEx ia IIC T5/T6, it can be installed indifferently in zones for gas 0,1 or 2 or zones for dust 20,21 and 22.
|
|
ST2000
ST 2000 manufacturer of pressure transmitters are a series of two-wire microprocessor-based, 4-20 mA instruments. The thick film ceramic sensor can measure gauge or absolute pressure with ranges of 0.2 to 460 bar (3 to 6700 psi).
ST 3000 Series 100 - Absolute
Honeywell ST3000 Series 100 absolute pressure industrial transmitters are used in applications in which high accuracy in the vacuum range of pressure is needed to include low-pressure gauge block in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column.
ST 3000 Series 100 - DP
Honeywell's ST 3000 S100 differential pressure transmitter can be used with any primary flow element to provide proven, repeatable flow measurement, from industrial furnace combustion airflow rate to hydrostatic tank gauging.
ST 3000 Series 100 Flange
Honeywell's ST 3000 Series 100 flange-mount transmitters may be installed directly onto a tank flange and are offered with a variety of tank connections to include ANSI flange and sanitary connections.
ST 3000 Series 100 Gauge
For applications requiring direct connection to processes requiring small flange, small sanitary connections or 1/2" NPT, Honeywell offers the STG14T transmitter.
ST 3000 Series 100 In-Line
ST 3000 Series 100 in-line transmitters are used in applications including high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels, and can be installed in a wide variety of hazardous environments.
ST 3000 Series 100 Remote Professional seals
Honeywell's ST 3000 Series 100 remote seal transmitters demonstrate proven reliability in applications with a wide variety of secondary fill fluids for corrosive or high temperature process fluids.
ST3000 Series 100 Temperature
Honeywell transmitters demonstrate proven reliability in hundreds on installations in a wide variety of industries and applications. All ST 3000 transmitters can provide a 4-20 mA output, Honeywell Digitally Enhanced (DE) output, HART* output, or FOUNDATIONTM Fieldbus output. When digitally integrated with Honeywell's Process Knowledge SystemTM, EXPERION PKSTM, ST 3000 instruments provide a more accurate process variable as well as advanced diagnostics.
ST 3000 Series 900 Absolute
Honeywell's ST 3000 Series 900 Absolute Pressure Transmitters bring proven smart technology to pressure measurement applications in which high accuracy in the vacuum range of pressure is needed.
ST 3000 Series 900 DP
Honeywell's ST 3000 Series 900 Differential Pressure Transmitters bring proven smart technology to a pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. It can be used with any primary flow element to provide proven, repeatable flow measurement.
ST 3000 Series 900 DP/GP
Honeywell's STD904 and STG90L transmitters are designed for applications where the highest accuracy is not required. STD904 transmitter applications include water flow for utilities. The STG90L gauge pressure transmitter is typically used for pressure in water and gas lines.
ST 3000 Series 900 Flange
Honeywell's ST 3000 Series 900 flange-mount pressure transmitters are offered with a variety of tank connections including ANSI flanges and sanitary.
ST 3000 Series 900 Flush Mount
Honeywell offers the STG93P transmitter for direct insertion in processes with the use of a 1" sleeve, welded into the process line. The primary application is pressure measurement in the head box of pulp and paper plants.
ST 3000 Series 900 Gauge
Honeywell's ST 3000 Series 900 gauge pressure transmitter applications include high-pressure measurement in boilers, fuel feeds and high-pressure reaction vessels in the petrochemical and hydrocarbon recovery industries or in any location where accuracy and reliability are crucial to safe, economical operation.
ST 3000 Series 900 Seals
Honeywell's ST 3000 Series 900 Remote Seal Transmitters are ideal for applications in which the transmitter must be mounted remotely from the process, including level measurement in pressurized vessels in the chemical and hydrocarbon processing industries, as well as flow measurement for slurries and high viscosity fluids in the chemical industry.
|
|
Ranges from 0...2.5 mbar up to 0...2000 bar
Accuracy up to ±0.1% FSO acc. to IEC 60770
very long-term stable, vibration- and shock-proofed.
Large range of different types, for use in
- industry, laboratories, research, institutes
- hydraulic, pneumatic, mobile hydraulic
- sanitary applications (e.g. EHEDG, FDA), flush
- Level
Several materials, e.g.:
stainless steel, PVDF, PVC, CuNiFe (offshore appl.) |
|
Pressure range up to 16,000 bar / 230,000 psi
Available in 22 pressure ranges
Accuracy up to 0.1%
Long-term stability, low operation costs
Output signal 0-10 V or 4-20 mA
|
|
| With diaphragms made of stainless steel (no more sealing problems) for all applications (hydraulics, pneumatics). Up to 600 bar in reliable SUCO quality. Unbeatable price/performance ratio. |
|
|