|
|
Sensor for differential pressure and volume flow, explosion proof
Electrical, explosion proof differential sensors series ExCon-P and RedCon-P, in acc. with ATEX 94/9/EG for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, Measuring range /- 100 Pa, /- 250 Pa, /- 600 Pa, /- 1250 Pa, /- 2500 Pa, /- 5000 Pa, /- 7500 Pa. Working range adjustable, output 0...10 VDC and 4...20 mA, actual value indication, aluminium housing in P 66, integral Ex-e terminal cabinet. series ExCon-P for use in Zone 1, 2, 21, 22. series RedCon-P for use in zone 2, 22.
The module is for installation inside the hazardous area, an interface in the safe area is not required, installation of intrinsic safe circuit is not required. This saves cost, space and guarantees safety. |
|
Transducer and switching modules for temperature, humidity and pressure, explosion proof
Elektrical, explosion proof trandsucer, series ExCon-A, Red-Con-A, ExCon-D, RedCon-D and EXL-IMU-1 as well as switching modules series EXL-IRU-1, to connect modulating or binary temperature, humidity and pressure sensors, in acc. with ATEX 94/9/EG for use in hazardous areas zone 1, 2, 21 and 22 (in acc. to sensor type), for all kind of gas, mixtures, vapours and dust. 24 VAC/DC supply, adjustable on site, integral display for programming and for actual value indication.
series ExCon-A for modulating, analogue sensors (type ExSens) and ExCon-D for modulating, digital transducers (type ExPro), for use in hazardous areas zone 1, 2, 21 and 22. series RedCon-A modulating, analogue sensors (type ExSens) and RedCon-D for modulating, digital sensors (type ExPro), for use in hazardous areas zone 2 and 22.
series EXL-IMU-1 for modulating, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting.
series EXL-IRU-1 for binary, analogue sensors (type ExSens) for use of sensors in zone 1, 2, 21 and 22, the module must be installed in the safe are and is prepared for DIN rail mounting. |
|
- CLASS I, GROUPS A, B, C, D;
- CLASS II, GROUPS E, F, G;
- NEMA 4X
- Proof Pressure to 3000~5000psi
- Adjustable Ranges: 7~4000psi
- Temperature: -25 to 205°C
- Switch Data: one SPDT Microswitch, 15amps 125/250V
- Housing: die cast aluminum alloy with paint
- Electronic Connection: ¾" or ½" NPT Female
- Pressure Element: welded type industrial diaphragm
- Process Materials: wetted parts are all in 316SS
- Process Connection: ½" or ¼" NPT Female |
|
The task of a suction line accumulator is to protect compressor specification from so called liquid hammers, which can becaused by the carry over of liquid refrigerant.
The consequence such liquid industrial hammer will be damage the following components:
• Suction Valve
• Discharge Cocks
• Pistons and Connecting Rods
• Gasket
• Industrial bearings
ESK suction line accumulators incorporate the injection principle, which prevents the transport of liquid refrigeration into the compressor, even if the accumulator is filt up with liquid.
|
|
Modello : MGS9/1B
Attacco al Processo : filettato, inox e materiali speciali
Membrana : saldata, inox e materiali speciali
Pressione di Esercizio : -1...0/0...40 bar
Tenuta : guarnizione PTFE
Caratteristiche Supplementari : smontabile
|
|
PTX 600 Series Precision manufacturer of pressure transmitters
For critical applications in industrial and research environments the PTX 600 series of two wire, 4-20mA output pressure industrial transmitters improves upon the performance of previous models by offering new levels of stability, versatility and measurement accuracy from a standard production device.
Druck's well proven silicon technology has been developed to provide a miniature micro-machined diaphragm which is electrostatically bonded to a glass substrate and stitch bonded within a glass to metal industrial seal assembly to provide exceptional thermal and stress isolation.
Features & Benefits:
Ranges from 1.5 psi to 10,000 psig or psia
Output 2-wire, 4-20mA
Accuracy ±0.08% FS BSL
Stability 0.1% FS per year
TEB ±1%FS from -5° to 176°F
400% FS Overpressure
NACE compatible Hastelloy and 316L SS wetted parts
UL/CSA/FM/CENELEC IS Class I, Div 1, CE Marked
|
|
The sensor is suited for torsion measurements and the measurement of reaction moments for orthopaedic industrial measuring devices. It is applicable for measurements of friction forces.
The strain gauge full bridge measure the torsion movement appearing in the tube of the lattice structure. |
|
Technology: Piezoresistive Silicon Sensor with Oil Isolation
Ranges: 15 to 5000 PSIG (340 bar); Vented Gage, Vacuum & Absolute
Overpressure: 2X Full Professional scale
Burst Pressure: 5X Full Scale or 15,000 PSI whichever is less
Accuracy: /-0.25% of range (BFSL) includes linearity, hysteresis and repeatability
Input: 10 VDC
Output: 0-100mV /-1% Span; Consult factory for other outputs
Compensated Temperature Range: -5 to 55°C
Thermal Effect: /-.5% Span Typical ( /-2% Max), Zero or Span
Stability: /-0.25% Span/Year
Process Connection: 1/4" - 18 NPT-Male
Electrical Connection: 20AWG Shielded Wire (18")
Wetted Materials: 316 Stainless Steel
|
|
ATEK MELT PRESSURE TRANSMITTERS provide accurate and repeatable measurements, are designed for high temperatures in applications such as plastics extrusions, oil services, food and medical, injection, blow molding, and resin production
- Good Stability and Anti-Jamming capatibility
- Economical Price
- Zero and Span Adjustable
- Various Amplified Signals Optional
4 - 20 mA , 0 - 10V or 3.33mV/V
- Flexible Capillary Isolation Configuration
- Internal 80% Shunt Calibration |
|
Electro-hydraulic suppliers of pressure switches are devices, which, when set under pressure close or open electrical contacts. They are widely used in applications where it is intended that, once a pre-set pressure is achieved and exceeded, an electrical switching command or signal should be triggered for further working cycles.
Many different versions (with pressure setting on a dial, with main and secondary switch, screw-on pressure switches) enable their use in many applications.
There is a design related difference of 8 ... 20 % between the upper switching point and the lower switching point. Only the electronic pressure switch type DG 5 E gives provision to select two independant switch points
and to set the hysteresis.
Type DT is an analogical pressure sensor manufacturers. |
|
VEGABAR series 60 manufacturers of pressure transmitters are developed for pressure as well as level applications. Their universal use is characterised by a user-optimised housing concept, resistant instruments and high accuracy. The suspension pressure transmitter VEGAWELL 72 with the proven and versatile technology is the completion for all standard applications.
The heart of VEGABAR 60 series and VEGAWELL is the CERTEC® measuring cell of sapphire ceramic® developed and manufactured by VEGA. For higher temperatures and/or aggressive products, the metal METEC® measuring cell, also developed by VEGA, is available for series 60 industrial transmitters.
Advantages
- High accurate measuring system
- Temperatures up to +250°C
- Optimised versions for hygienic applications
Applications
- Manufacturer of level measurement of liquids
|
|
Anyone who uses ultra-low pressure, vacuum and differential switches can tell you that they will inevitably wear down in low pressure environments, causing contact erosion, loose terminals, professional switch instability and leakage.
The result? Equipment failure, downtime, and productivity setbacks no busy manufacturer can afford. Fortunately, now there's an alternative-
New Solution to Ultra Low Supplier of pressure switch Problems Helps Avoid Leakage, Set Point Instability and Contact Resistance- an innovation in switch design that combines special gold crossbar contacts with a revolutionary "all-in-one-weld" contact/terminal construction for switches that deliver reliability, long life in harsh, low pressure environments—the MAM005 line of ultra-low pressure, vacuum and differential switches.
Most important, not only do these rugged and dependable switches last longer, they're comparatively priced, no matter if you're just looking for pre-configured switches available for immediate shipping, standard switches tailored to your business needs, or custom-designed switches for special applications |
|
Features:
- 350ohm Strain gage Input
- Scaleable Range
- 2 Configurable Alarms HIGH/LOW/OFF
- AUTO/MANUAL Calibration
- Manual ZERO
- Lockout
- Process Value - RETRANS |
|
M3 Melt pressure transducers - mV / V output
Pressure ranges from: 0-35 to 0-2000 bar / 0-500 to 0-30000 psi
Strain gage Wheatstone bridge
Accuracy : <±0.25% FSO (H); <±0.5% FSO (M)
Internally generated 80% calibration signal (R-Cal)
Fluid-filled system for temperature stability
Fully interchangeable with all existing brands
Grade of protection: IP65 (6-pin connector specifications version)
1/2-20 UNF, M18x1.5 standard threads; other types available on request
Standard diaphragm is 15-5 PH stainless steel with Armoloy coating
17-7 PH corrugated diaphragm with TiN coating (Titanium Nitride) for ranges below 100 bar-1500 psi
Other diaphragms available on request |
|
| Dynisco's wide variety of robust Melt Suppliers of pressure transducers have been designed specifically for harsh and rugged environments of the Extrusion and Polymer Processing Industries. Select from one of the many robust and reliable products offered on the market today. No matter what the pressure requirement, whether it is for safety reasons or control to help tighten product specifications, Dynisco can supply it. |
|
STANDARD FEATURES
- Interchangeable with Competitor's models
- Fluid filled system (or new pushrod design)
- 6pin Bayonet Professional connector
- 6"Stem with/without 18"Flex Professional hose
- 0.5% combined error
- 80% Output Calibration
- 750oF (400oC) Rating
- Ranges from 0-500 to 0-20,000psi
- Standard Diaphragm INCONEL |
|
| The 3100/3200 Series offer an all stainless-steel design, less than 1 inch in diameter, and 32 grams. They deliver pressure sensing ranges from 0 to 30,000 psi (2,200 bar), various outputs and pressure ports, and tremendous shock and vibration specifications. In addition, the unique temperature compensation at source technology delivers outstanding temperature stability. The 3100/3200 series delivers a output signal for both temperature and pressure, providing full scale accuracy of 0.25%, and long term drift limited to just 0.1% over the full scale per year. |
|
Sensortechnics is a leading manufacturer and distributor of a wide range of sensors and fluid control devices. The product portfolio includes basic pressure sensors, rugged industrial transmitters, submersible supplier of level sensors and customised pressure sensing systems from 1 mbar up to 1000 bar as well as liquid suppliers of level switches, oxygen, flow and force detectors. Additionally, Sensortechnics offers ultrasonic air bubble, air-in-line, liquid level and fluid monitoring sensors and detectors. Fluid control devices include small solenoid valves and supplier of diaphragm pumps, electronic pressure drivers and custom specific fluidic control systems.
Sensortechnics has more than two decades of experience in providing highly customised sensing products and in the development of complex integrated fluid control systems for OEM customers worldwide. |
|
Measuring range : from 0/+10 Pa to -10 000/+10 000 Pa
Configurable intermediary and central zero ranges
Air velocity and airflow functions
Interchangeable measuring sensor (SPI technology)
Simultaneous display of 1 to 4 parameters
External professional transmitter unputs (KIMO class 200 and 300) and manufacturer of thermocouple K
2 output 4-20 mA or 0-10 V (4 wires), RS 232, 2 RCR relays 6A/230 Vac
2 visual (dual color LED) and audible (buzzer) alarms
Software, keypad or professional remote control configuration
MODBUS network RS 485 system (optional)
ABS or ALU IP 65 housing, with or without backlit gaphic display
Mounting with the 1/4 turn system with wall-mount plate
CP301 : -100/+100 Pa
CP302 : -500/+500 Pa
CP303 : -1000/+1000 mbar
CP304 : -10 000/+10 000 mbar
• Barbed professional fittings Ø 5,2 mm
• Unit of measurement : Pa, mmH2O, mbar, inWG, mmHG
• Power source : 24 Vac /Vdc, 115 Vac or 230 Vac
• Outputs : 2 x 4-20 mA or 2 x 0-10 V
• Functions : pressure, air velocity, airflow with Pitot tubes, Debimo and other coefficients, integration of measure, self-calibration, measuring correction factor, temperature compensation : manual or automatic (thermocouple K input). |
|
Aerospace Manufacturer of pressure transducer - PDCR 330 Series
The PDCR 330 pressure transducer is the culmination of over 10 years of development by Druck engineers.
It is currently being used on major aerospace projects and is equally suitable for flight test programs and test bed measurements, being capable of measuring pressures from 5 psi to 10,000 psi gauge, sealed gauge and absolute.
Features & Benefits:
Ranges from 5 to 10,000 psi g or sg or a
Output 0-100mV (10mV/V)
Accuracy ±0.06% FS BSL
Stability ±0.1%FS per year
Hastelloy and 316L SS all welded
Operating temperature range -65° to +300°F
Fully qualified FAA TSO C47 certification available
Call factory for differential versions
|
|
| Dynisco has a wide range of Industrial Suppliers of pressure transducers designed for the toughest pressure measurement applications in the worst environments. Applications include hydraulic, pneumatic, professional oil services, vehicle test stands, professional die casting, autoclave, turbines, etc. Transducers are available with special pressure professional fittings, various electrical terminations, corrosion resistant alloys, varying outputs and high gain electronics. |
|
Piezo-resistive OEM pressure cells (40.4410)
The pressure cell is used to measure pressures in liquids and gases. The parts in contact with the medium are in stainless steel.
The measured pressure is converted into a proportional voltage.
Further information on request |
|
The P571 pressure sensor manufacturer is a high stability, small diameter, stainless steel pressure sensor intended for use in suppliers of pressure transducers and other OEM pressure metering applications. Its thin-film metal stress gauge circuit enables a long-term stability of better than 0.1% per year. Options include Hastelloy, 500 Vac insulation resistance, integral sputtered thin-film RTD, as well as various optional specifications on TC Zero and TC Span.
The unique design can be used with an infinite variety of pressure professional fittings, which can be supplied by SMD or provided by the customer. Ideal for pressure transducers and professional transmitters as well as other pressure measurement applications including process driver, hydraulic systems, general industrial, down-hole, pressure references, Cenelec applications, aerospace, automotive and more.
|
|
Piezo-resistive fluid-Check®
Pressure sensor suppliers DS-1-A-400 for oil and water devices
Installation ONLY 3 Minutes, NO NEED TO CUT PIPES www.servclip.com
DS-1-A-400-1/4" for serv-Clip® Type 1
(for mounting on pressurized pipes)
DS-1-A-400-3/8" for serv-Clip® Type 2
(for mounting on non-pressurized pipes)
Description
In addition to its robust and compact design, this sensor stands out by its high accuracy and its extensive measurement range. As a standard, the housing and all parts exposed to the liquid are made of stainless steel (Type 1.4571). The standard connection is G1/4“, with soft professional seals made of Industrial viton.
It can be combined with measuring connector specificati | | |
Pressure sensors, Pressure switches
