|
|
| Products 91 to 120 of 272 |
Kistler sensors measure pressures with high precision over a wide area of applications and under the most extreme conditions. For example: professional cylinder pressure in engines, the pressure in plastic melts or the pressure drop in dialysis units.
|
|
Industrial universal pressure transmitter specifications with oil-filled measuring cell, high accuracy, excellent long term stability, excellent temperature behavior, high loading, long service life, standard version RAG25 with G1/4%u201D thread, also available with other thread connections.
Applications
Process technology, mechanical and plant engineering, hydraulic and pharmacological industries, construction machine and vehicle manufacture, metrology and hydrometry, injection casting technology, aerospace technology, level metering. |
|
Features
* Suitable for hygienic applications
* High accuracy
* Long term proven reliability
* Rugged construction
* Simple installation and set-up
* Standard and bespoke units
* Pneumatic systems for hazardous areas
* Liquid and slurry continuous level metering
* Continuous pressure monitoring
Level Control
Industry's requirements for level and pressure measurement are as varied as industry itself. Finding a system which can cope with that wide scope and do it accurately, safely and with absolute repeatability is one of the key tasks facing today's process manager. With hazardous products and harsh environments to handle, perhaps requiring intrinsically safe equipment, one of the main factors in choosing a level/pressure system must be its reliability and toughness.
Efficient Level Measurement Solutions
For industry to benefit from the installation of level measurement systems, the selected system must be reliable, repeatable and accurate. In addition, it should be installed quickly, with a minimum of costly down time and it should provide an interface with data acquisition suppliers and control equipment.
By employing equipment that satisfies these criteria companies can increase both their efficiency and productivity. However, with so many different techniques to choose from, selecting the best method for your application is difficult.
We at CT Holledge, with our range of pneumatic and electronic pressure sensors manufacturers, will assist you through the minefield of system selection and supply you with equipment that not only meets your requirements but exceeds them. |
|
New! The Vaisala Combined Pressure, Humidity and Manufacturer of temperature transmitter PTU300
Vaisala introduces a new generation barometric pressure, relative humidity and temperature professional transmitter series, the Vaisala Combined Pressure, Humidity and Temperature Transmitter PTU300. The PTU300 features fully digital measuring electronics for all three parameters, several small RH&T sensor heads for different applications, and calculated humidity variables. The new backlit display shows three-hour graphical trends and up to one year of historical data. The recorded measurement data can be viewed on the display or transferred to a PC. Seven languages options are also available.
The PTU has four different probe options: PTU301 for laboratories, PTU303 for outdoor use, the warmed PTU307 probe for demanding meteorology, and the PTU30T for pressure and temperature measuring only.
The Vaisala BAROCAP® sensor is used for pressure measuring and the Vaisala HUMICAP® sensor measures humidity. Both sensors are known for their high accuracy and long-term stability. The temperature sensor specifications is a platinum RTD sensor.
Applications include environmental monitoring in calibration laboratories, GPS meteorology and professional weather stations.
|
|
DMS, STRAIN-MATETM or piezoelectric technique: we control technologies, the processes of measurement and their integration to solve your specific applications of force, pressure or deformation.
Used in hydraulic and pneumatic applications or in laboratory, our robust pressure pick-ups measure with more the utmost precision, even during their use in the industrial environments hardest. All the range of our pressure pick-ups is deliverable with connections and output signals frequently used or specific execution. |
|
All-Fluid Sensor
Universal manufacturers of pressure sensor SDET for monitoring a wide range of gaseous and liquid media
Flexibility: pressure monitoring for a wide range of media, resistant to water and oil
Stable stainless steel housing, media-resistant fluoro-rubber seals ring and ceramic sensor based on thick-film technology
Fast installation, thanks to standard interfaces and easy linking of the mounting attachments
|
|
A New Generation of Suppliers of pressure transmitters
As a leader in the pressure measuring field, FUJI ELECTRIC has achieved an installed base of about 500 000 FCX industrial transmitters throughout the world. Thanks to its experience, and in order to satisfy the users demand, FUJI ELECTRIC has developed two new products:
The FCX-AII series, aiming at high-accuracy and excellent performance, and the FCX-CII series, featuring compactness and low-cost operation.
Each of these series offers a wide measuring range and a full variety of options so that the most applicable model can be selected.
|
|
Our manufacturing capability offers our valued customers the option of choosing from our plethora of standard Manufacturer of pressure sensors with capacities ranging from 29 psi to 36,000 psi.
FUTEK is not limited to our standard products; we SUPPORT our customer’s needs to either modify our standard Pressure Sensors or offering a complete custom design.
FUTEK signature Pressure Sensors generally provide:
-Stainless steel construction for durability in fluid/rugged environmental factors and titanium construction for extreme environments
- Lightweight to Ultra-lightweight designs as low as 6 grams for maximizing handling and minimizing weight constraints.
-Miniature flush mount option Manufacturer of pressure transducers make for added flexibility and ease of mounting.
-Optimal long term stability Pressure Sensors having a nominal 2 mV/V output with options containing unamplified, amplified, and digital output.
-Great handling capabilities of both liquid and gas Pressures with safe overloads to 150% of capacity.
-Flame resistant designs coupled with Wide Frequency response bands and high resistance to vibration/shock.
-High Temperature Pressure Sensors may withstand extreme Temperatures ranging from -58 deg. F to 572 deg. F. |
|
Board Level
Board level, or PCB-mountable, pressure sensors manufacturers use piezoresistive silicon die technology and are suitable for air or non-corrosive gases for pressure ranges from 1 to 500 PSI. Sensor packages include dual in-line, TO-8, TO-5, and disposable blood pressure sensors.
Transducers
Measurement Specialties produces a broad range of amplified output supplier of pressure transducers for everything from high volume OEM use to high accuracy applications. Measurement Specialties proprietary Microfused™ pressure transducers are designed for OEM applications that require high reliability in harsh conditions. Measurement Specialties' high performance line includes Ultrastable transducers for instrumentation, foil strain gage transducers for severe environments and miniature transducers used for automotive and aerospace testing.
Sensor Elements
Measurement Specialties oil-filled stainless steel pressure sensors are suitable for use in harsh environments of liquids or gases. Many feature proprietary Ultrastable piezoresistive silicon die technology for long term reliability.
Liquid Level Transducers
Measurement Specialties' Ultrastable transducers in special packaging for tank or fully submersible liquid level measurement. |
|
A range from 50 mB to 4 000 B or 5 m water to 250 m water
Our large range of stainless steel pressure sensors manufacturers is designed to measure fluid pressure. These sensors can be used to measure liquid levels for applications such as:
- filling tanks
- check of water table levels
Our sensors can be equipped with configurable recording systems. Their very low power consumption design enables several years autonomy. |
|
Supplier of pressure sensors with Ceramic Elementfor relative pressure gauge block
- good value
- linearity <0,5 %of full professional scale value
- 2-fold overpressure-safe
- high temperature resistance
- no mechanical ageing or creepage
- no filling liquid necessary
Functional description
The series DSK pressure detection are precise, temperature-stable but nonetheless good value units for measuring pressure in liquids and gases.
A new type of ceramic sensor forms the core of these units.It consists of a thin aluminium oxide industrial diaphragm, on the rear side of which thick-film resistors are fitted in a Wheatstone bridge circuit.For stabilisation purpose, this diaphragm is connected to a thicka luminium oxide baseplate and is mounted in an appropriate casing with threated connections. |
|
| SMD’s Peerless engineering team designs sensors for unique requirements and aggressive cost targets. Typical specialized requirements include small sizes, high temperature, low capacities, “Cenelec” dielectric, and overload proof sensors. |
|
Process manufacturer of pressure transmitter with CERTEC®
Suitable for pressure measurements of gases, vapours and liquids
All advantages in an overview:
- dry, ceramic-capacitive sensor element
- 4 ... 20 mA two-wire system with a supply voltage of 12 ... 30 V DC
- characteristic deviation 0.5 %
- long-term stability 0.1 %/2 years
Measuring cell: CERTEC® high overload resistance
Measuring range: -1 ... +60 bar (-100 ... +6000 kPa)
Deviation in characteristics: 0,5
Product temperature: -40 ... +100 °C
Standard signal: 4 ... 20 mA two-wire |
|
| The ifm manufacturers of pressure sensors are based on a ceramic measuring pressure cell which converts the measured quantity of pressure into a capacitive signal as a result of the deflection of a diaphragm. A microprocessor controls the evaluation of the electrical signal. For the efector 500 the system pressure is directly indicated on the unit by an LED display. |
|
"The surveillance of the working pressure in a system is a very important operation parameter in fluid power and lubrication systems.
Depending on the type or mode of the control system, the display and / or the indication of relevant pressure levels, different pressure limits or continuous readings are required. In many cases a variety of different sample points are controlled and displayed by manufacturers of pressure switches with professional digital displays at a centre point. Traditionally, these pressure switches are all hydraulically piped up to the sample points.
The Pressotronic now offers a more contemporary and simple method for reliable surveillance of system pressure.
Depending on the application we offer a choice of adjustable pressure switches with digital display directly installed at the sample point or versions with separate sample point industrial transmitters and professional remote control and display units. In this case, the transmitter and the professional displays are connected just by simple elastic cables instead of inflexible pipes.
Both versions provide almost fully identical modules. The control and display unit features a three digit Light emitting diode display with good readability even under poor visibility conditions. As a combined unit, the display can be positioned within an angle of 270° .
The control unit itself is designed for 35 mm rail mount. This allows to compile several units without additional installation materiel in professional cabinets.
The transmitter is available for stand alone with an analogue 4-20 mA output. |
|
Dytran's 2300V series piezoelectric dynamic manufacturers of pressure sensors feature fast rise times, rugged stainless steel construction, high stiffness, and extended ranges. The 2300V series is available in 5 ranges, from 250 psi to 10,000 psi. Shared features include acceleration compensation, hermetic industrial seal, and one-piece construction for ease of removal. To learn more about the 2300V series visit the Dytran website or email us.
Key Features:
High natural frequency
Wide dynamic range
Fast rise time
Acceleration compensation
All stainless steel construction
Hermetically sealed
Ruggedized construction
Potential Applications
Fast rise time dynamic pressure measurements in liquids and gases |
|
Description
The fibre optic manufacturer of pressure sensor P-01 consists of a membrane that is connected to a FBG mounted under pre-strain. When pressure is applied to the membrane, the membrane will deflect resulting into a change in the FBG strain value and hence also in a change of the reflected FBG wavelength.
The head of the pressure sensor is foreseen of a thread that allows connecting the sensor to pipelines, cocks and vessels.
In order to compensate for temperature influences, a high resolution manufacturer of temperature probe is integrated within the housing.
The housing is made of stainless steel and is terminated with an optical interconnection using a plastic tubing. Tubing lengths and manufacturer of connector can be specified following the needs of every application.
The sensor is single connectorised but can on request also be designed for series configurations.
Features
The pressure sensor P-01 can measure pressure and temperature with a resolution of 0,05% Full Scale and 0,1 °C respectively and an accuracy of 1% Full Scale and 1 °C respectively. The pressure range can be chosen between 1 and 150 bar.
Applications
The pressure sensor can be applied for flow control in all sorts of pipelines and liquid level measurements in reservoirs and others. |
|
| The SPX2280 is a smart industrial 4 - 20 mA manufacturer of pressure transmitter designed for use in hazardous locations. The SPX2280E has explosion proof approval for Class 1, Division I, Groups A, B, C & D, Class 2, Division II/III, Groups E, F & G. The explosion proof model employs a conduit fitting. The SPX2280S is approved for ATEX II 2 (1) G 100a and Intrinsic Safety for Eex ia IIC T4/T6. The intrinsically safe and ATEX models can be supplied with either a conduit fitting or a variety of professional connectors. The standard SPX2280 is an all welded construction that features a 1/2-14 NPT male thread for installation. Models are available in PSIG, PSIA and PSIS. Optional pressure professional fittings and electrical terminations are available. |
|
stainless steel, 60 bar max, piezoresistive
stainless steel, 600 bar max, ceramic
compact, stainless steel, 400 bar max, ceramic
stainless steel with flush industrial diaphragm, 600 bar max, ceramic
stainless steel with flush diaphragm, 40 bar max, for food and sanitary sector
|
|
| Trafag manufacturers of pressure transmitters are used for the electronic measurement and evaluation of pressure values. They are available in many different versions with regard to pressure and electrical connections, measurement procedures, electric output signals, and approvals (CE, Ex, Shipbuilding, Railways). Two different sensor t | | |
Pressure sensors, Pressure switches
