Tube, Profile bending machines

121 companies | 858 products

The EG-AR series is the latest addition to our range of manual and automated press brakes. Designed specifically for high speed bending of small complex parts,...

The Astro II 100NT series compliments our press brake range by fully automating the folding process. The Astro II 100NT series is the complete solution...

{{productDetail[8254]}}

The Digibend table is machine made of Meehanite® 700N/mm2 monoblock that is designed to bend small parts, thick materials and bus bars. This device from Euromac gives strong bending flexibility...

{{productDetail[16272]}}

This is an inexpensive and compact multfunctional mobile unit, which allows various operations that...

This item is based on a combination of several tools, being regarded as a multifunctional mobile unit that allows carrying out various operations...

The best machine for bending rigid stainless steel (AISI 316 TI) and carbon steel...

C50 EL bending machine is the best for bending 5 to 50 mm diameter and 3 mm maximum thickness rigid stainless steel AISI 316 TI) and carbon steel...

This device, which is easy to use and maintain, is the best for bending thickness rigid stainless steel (AISI 316 TI) and carbon steel (ST 37.4)...

{{productDetail[17876]}}

Voortman V2000 series beam cambering machine is made out of heavy steel, which directly offers a robust, compact, durable design. It...

{{productDetail[22084]}}

pipe bending machinery:
- Mobile and stationationary pipe bevel machines up to 3 inch.
Buffalo 42, mobile pipe bending machine up to 42 mm diameter
Buffalo 50, mobile pipe bending machine up to 50 mm diameter.
for...

Buffalo 2-202 S, tube bending machine

maximum pressure 70 KN about 7000 kgs
strok length piston rod 0-300 mm
piston rod speeds forwards...

{{productDetail[112305]}}

The E-FLEX is the new automatic single-head, all-electric, CNC wire bending machine.

Equipped with two clockwise and anticlockwise bending turrets, it is perfect for 3D bending and allows multiple bending technologies to be performed on the same part within the same cycle. Coil feeding...

4-RUNNER is a complete production process starting from a coil: straightening, end-forming (up to six passes), facing, rolling, bending, cutting and controlled unloading of the finished part all in one.

The unquestionable advantage of this combined machining centre is...

The BLM Group has equipped the E-Turn with right and left bending in process and 3D graphic visual programming. The tool is a fully electric bending...

The Smart model is manufactured by the Blm Group, and is an electric tube bending...

The Elect series is manufactured by BLM group, and is a complete electric CNC tube bender that is widely utilized for tubes with OD of 80 mm. It consists of 9 axis integrated...

{{productDetail[6136]}}

Exclusively from Geka, the Permanent Bending Station complies with CE standards and is a one cylinder ironworker that includes five workstations. At all five station the blade holder's vertical...

Gek exclusively offers two cylinders ironworker with five work stations that comes in two versions S, (250mm throat) and SD (500mm throat). The permanent bending station is designed and developed in compliance with CE standards. The blade holder's...

The BENDICROP 85 is an automatic punching and bending machine that is typically used in metal construction applications. It is characterized by its...

{{productDetail[16797]}}

Three hardened driving rolls with smooth surface
Nr. 3 hydraulic motors directly keyed on the rolls
Independent regulation of...

Central driving and adjustable roll, fixed and idle external rolls
Lateral...

One driving roll
Indipendent adjustment...

Three driving rolls
Central roll adjustment
One...

Bending machine for guard rails with hydraulic motors
Possibility to bend both 2 and 3 waves sections, leg-in...

{{productDetail[16952]}}

The MCP series is manufactured by DAVI PROMAU. It is a profile bending machine with 3 drive rollers, and...

{{productDetail[16273]}}

Consisting of a solid structure, the CHV3380 bending machine is fitted with thermally treated NiCr steel shafts supplied with ball-bearings to reduce the friction of mechanical parts, thus ensuring a long lifespan. It can be positioned...

Consisting of a solid structure, the CHV4100 bending machine is fitted with thermally treated NiCr steel shafts supplied with ball-bearings to reduce the friction of mechanical parts, thus ensuring a long lifespan. It can be positioned...

Consisting of a solid structure, the CHV3360 bending machine is fitted with thermally treated NiCr steel shafts supplied with ball-bearings to reduce the friction of mechanical parts, thus ensuring a long lifespan. It can be positioned...

This series consists of one model only, the CE2 with two driving rolls with a knurled surface. The machine structure is extremely solid and the shafts are constructed...

{{productDetail[16524]}}

These are two different lines for the tube production used as poles, water lines, gas lines etc. and the heart of this line is a very new pre-tension plate rolls able to bend...

Hydraulic double pinch bending machine designed to bend sections and tubes. The section bending machine type VG is a machine which is different from the traditional three roll section bending machines, thanks to its revolutionary geometry. In fact the side rolls can translate horizontally and independently from one another with variable...

Three-roll bending machine for sections and tubes, double initial pinch style (non-symmetrical roll design): stationary upper roll, independently adjustable lower rolls.
Functional specifications:
- the side rolls are powered by means of a hydraulic motor coupled to a planetary reduction-gear. the central roll is directly controled by the hydraulic...

{{productDetail[28331]}}

Powerful Production Machine for complex bending tasks

KPB 45
• including a modular roller system for optimum adaptation to desired profile
• manually adjustable leveling rolls
• hardened and ground shafts
• allows horizontal...

Cost-Effective Ring and Profile Benders for universal trade applications

• millimeter...

For exact cold and hot bending of flat, round and square steel

• sturdy design for...

For angle, round, loop and coil bending

• to produce grids,...

{{productDetail[27150]}}

The ZB 30/3 H has a 20-mm shaft diameter and a roll diameter of 76 to 86 mm....

The ZB 60 series is a bending machine manufactured by ZOPF. The device is equipped with two...

ZB 70/2 M
TECHNICAL SPECIFICATIONS
two driven rollers, knurled surface
- manual adjusting of the center roller
- working position horizontal an vertical (optional)
- complete with standard...

The ZB 100H features two driven rollers with a knurled surface. It can work in either...

The ZB 120/3 H2 CNC Machining Centers are manufactured out of heavy steel fabricated materials. The systems are integrated with 3 driven rolls, each with independent hydraulic planetary motors....

{{productDetail[26746]}}

All electric tube bending machine 80CNC-EMR
with CNC control Bend Motion Control
for tubes 20 80 mm Ø steel, stainless steel , high strength steel, etc.

All...

Precise bending of highly complex part shapes
through automatic change of bending direction and simultaneous
movement of the axes on the bend head
Increased fl exibility with minimized changeover
installing tools on both sides and thus reducing change over times
when bending in one bending direction
High machine stiffness and processing...

All electric tube bending machine 100CNC-E with CNC control Bend Motion Control
for tubes 20 100 mm Ø Steel, stainless steel, high strength steel, titanium, etc.

All axes with electric...

All electric tube bending machine 60CNC-EMR
with CNC control Bend Motion Control
for tubes 20 60 mm Ø steel, stainless steel , high strength steel, etc.

All axes with electric servo motors,...

The multi-axis-controlled mandrel bending machines offer the...

{{productDetail[115179]}}

The unit is especially designed for the busbar bending and punching machine 03200, as well as the busbar cutting machine 03250. The unit is suitable for transport in vans along with shelving equipment.

It...

The Combi machining cart model is manufactured by Alfra, and is a bus-bar work-center with 4 stations, which has a bending bus-bar of 120 x 12 mm. It has a punching bus-bar diameter...

{{productDetail[19772]}}

Grangier's PH1 Hydraulic Bending Machines are integrated with triggering stops for repetitive folds, and engraved main angles...

{{productDetail[8364]}}

This model is qualitatively one of the best and high-graded worldwide. It is ideally suited for bending...

Hand Bender HB XS ... A VARIETY OF BENDING OPTIONS ...

The hand bender Gelber-Bieger HB allows manually, with physical force,...

The Hand Bender HB XS Mini is the small brother of the Handbieger HB XS.
Both Benders have the same set up. For starters you can acquire a basic set and...

The Pipe bender HRB 12 Plus is a manual bending device with digital displays.

The...

The C·B·S - Compact Bender Stick is a small battery operating hydraulic press. With a weight of
under 10 kg this universal tool can be used as well...

{{productDetail[123483]}}

The PEL-100 is a CNC channel letter bending instrument that is ideal for use in the production...

The PEL-600 is manufactured by Perfect Laser Co., Ltd. from China. It is a fully automatic...

Automatic CNC bending machine, (also called CNC letter bending machine...

The automatic CNC channel letter bending machine is a new advertising production equipment. Also known...

Perfect Laser's PEL-500 Automatic CNC Bending Machines are commonly utilized for applications that involve logos, signs, neon signs, billboards, light boxes manufacturing, outdoor advertising products, and more. The machines are...

{{productDetail[71313]}}

A RHTC magnetic bending machine with a high strenght-to-weight ratio
These RHTC magnetic bending machines can be used for several different purposes.

The fundamental principle of this bending machine is that it uses electromagnetic clamping,...

A RHTC magnetic bending machine with a high strenght-to-weight ratio.
These RHTC magnetic bending machines can be used for several different purposes.

The fundamental principle of this bending machine is that it uses electromagnetic clamping, which means that folding loads are taken right at the point where they are generated; forces...

A RHTC magnetic bending machine with a high strenght-to-weight ratio.

These RHTC magnetic bending machines can be used for several different purposes.

The fundamental principle of this bending machine is that it uses electromagnetic clamping, which means that folding loads are taken right at the point where they are generated;...

If you want to bend profiles or pipe material, then the RHTC profile bending machine is your best choice. With our profile bending machines you can bend...

If you want to bend profiles or pipe material, then the RHTC profile bending machine is your best choice. With our profile bending machines you can bend...

{{productDetail[40085]}}

Standard specifications

Two driven rolls
Standard rolls
Guide...

This machine is affordable, reliable and robust. It has quite some excellent features that make it up for its standard specifications making it a unique machine....

The section bender of this machine comprises of 3 driven rolls and standard, and guide rolls. The working...

These Section Benders work horizontally and vertically. Standard rolls, guide...

Amob's MAH 50/2 is a hydraulic benders equipped with two driven rolls, standard rolls...

{{productDetail[61071]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation