|
|
| Products 121 to 150 of 155 |
Class Name:Electric forklift trucks->Electric powered reach forklift trucks
Electric Reach Truck-sit-down Type 1.6-2.0T
Model : CQD16S-B2
Load Capacity : 1600 kg
Load Centre : 600 mm
Lifting Speeds : 260/380
Standard Lift Height : 4250 mm
|
|
|
With award wining designs and features, our narrow aisle lift trucks not only does the job but looks good and is operator friendly. The narrow aisle Cat lift trucks feature durable, ergonomic design and modern technology to help increase productivity in today's tight warehouse aisles.
|
|
2,500 - 4,500 lb
Electric Reach Trucks
High-flyers. If you are looking to maximize warehouse space, the N-Generation reach trucks are your best solution. Our 100% AC reach trucks operate effortlessly in aisles well below 10 feet in width, maximizing overall warehouse storage space utilization.
The N-Generation reach trucks also offer better capacity retention than counterbalanced lift trucks, permitting loads to be staged at much higher racking levels. This in turn helps improve overall cube utilization and helps reduce the cost per pallet position, lowering overall operational expenditures tied to warehousing and material handling operations.
|
|
|
|
|
|
FM-4W
4-way reach truck
STANDARD EQUIPMENT.
The FM-4W 25 four-way truck is a universal unit, which is especially suitable for transporting long products and putting them into stock, as well as normal pallets and containers. Thanks to its four-way design it allows the economical utilisation of storage space with minimal working aisle widths.
DRIVER ’S COMPARTMENT.
- Adjustable steering wheel position with fore and aft seat adjustment allows a comfortable working position.
- Comfort seat features hydraulic damping adjustable to the driver‘s body weight as well as a tilt function (up to 15°). Seat contour shaped to give plenty of untiring support. For added safety the truck can only be driven if the foot switch is depressed.
- The clear view mast with good all round visibility and optimised view through the overhead guard give the driver a very clear optimum overview.
- Control is through four ergonomic levers.
- Comfortable, upholstered arm rest provides supports whilst operating the truck.
|
|
|
|
|
|
Reach trucks are at the heart of many storage and distribution systems. BT sets the industry standard with the Reflex range. Outstanding performance, exceptional driving characteristics and a unique record of reliability in operation.
BT%u2019s Reflex family is designed to deliver the lowest possible handling cost, through the combination of high productivity, low maintenance requirements and an unrivalled reputation for reliability %u2013 with measured availability levels exceeding 99%. Reflex offers the highest acceleration, braking, and lifting performance, which is easy to program and control thanks to its intuitive man-machine interface. AC power brings low operating costs and long work cycles. A full range of truck chassis and mast configurations is available, with capacities up to 2500 kg.
For high-lift applications, BT offers the unique Reflex E-series, with tilting cab. This reduces neck and shoulder strain, and allows faster and more accurate fork positioning. For intensive work, ACi models are fitted with electronic support arm brakes, which allow a higher top speed. Designed for lower-intensity applications, the M-series has the benefit of a narrow chassis and an economical price.
|
|
General description :
Electric Narrow aisle Lift Trucks
3000 lb Capacity Electric Orderpickers
Demanding applications require a reach truck you can demand a lot from - one that performs to the highest standards, shift after shift, operator after operator. Our 24- and 36-volt reach trucks are fully-equipped with productivity-boosting features, from the spacious operator compartment to the informative operator display.
The AC drive and hydraulic system, rugged mast and display-based diagnostics are just some of the many features that help make our reach trucks reliable. If you're looking for a reach truck that's dependable and easy to maintain, while helping to keep downtime to a minimum, look to our NR3000-NS4000 series.
Model Type power (voltage) capacity (lb) top speed (mph)
NR3000 Orderpicker 24 3.000 5.3
NR3500 Orderpicker 24 3.000 5.8
NR4000 Orderpicker 36 3.000 6.1
|
|
Lifter RTX20/70
Main features
Operation : Seated driver
Nominal load capacity : 2000 kg
Residual capacity at maximum height : 1800 kg
Free lift : 2404 mm
Lift : 7000 mm
Forks dimensions : 1150 mm
RTX20 Series
The RTX20 reach truck is a well-designed fork-lift offering extreme flexibility. The nominal load capacity is 2 t and the excellent residual loads allow the handling of heavy loads, even at high elevations. The vehicles maneuverability allows ease of use even in confined spaces. High quality components ensure that the RTX20 is suited to intense working conditions.
|
|
M 1200 S
If you are looking for high volume handling capabilities and superb manoeuvrability for distribution or sorting centres, the M1200, with its super elastic wheels is more than up to the job.
|
|
Thanks to their advanced, modular construction, Toyota Reach Trucks can be precisely customised to suit your specific task. A wide range of chassis, mast and battery combination means they provide even more effective, reliable operation in almost any working environment.
|
|
Single Reach and Double Reach Trucks
3,000-4,500 lbs. Lifting Capacity
Toyota 8-series Electric Reach Trucks revolutionize the way materials are handled when cube utilization is at a premium. From the versatility of the latest electronic control technology to the comfort and convenience of an ergonomically designed operator compartment, Toyota's 8-series single reach and double reach trucks represent a dramatic approach to reach truck performance and quality.
|
|
D100/120/150
Designed to provide operator with maximum comfort
Performance-driven components
Low emission and powerful Doosan-Daewoo DE08TS engine
Large capacity cooling system
3-speed powershift transmission
Planetary type drive axle
Fully air actuated S-cam brakes on planetarydrive axle
High-visibility mast and carriage
Fully isolated operator compartment
Light-touch hydraulic controls
Easy maintenance
|
|
|
|
|
|
EP electric Reach Truck-H series
H series 1.2/1.4/1.6/2.0 ton Electric Reach Truck
The Reach Trucks are used wherever the space is confined and where heavy loads need to be raised to high
lift heights.
1. The drive's compartment, through generous dimensioning, provides the driver with a comfortable body
position. The excellent all-around visibility and the low noise level ease the operation.
2. The operator compartment has incorporate controls for hydraulic functions, direction control, horn, lights
and handbrake, all within convenient reach of the operator. Padded armrest, rubber floor mat and resin coated
control knobs ensure comfort for daylong operation. The tilt of the steering column can be freely adjusted to
any degree.
3. Curtis is made of Multi-function instrument, together with the multi display monitor provide information and
function input for the operator to allow optimum performance and operator confidence.
4. Drive and hydraulic control fitted as standard. MOSFET CHOPPER, Power transistors with high impulse
frequencies control the motor in an energy saving and noiseless manner. The drive control provides a jerk-free
start and a strong acceleration. Adjustable energy feedback on releasing the drive pedal through regenerative
braking.
5. The chassis design and steering geometry provide an outstanding turning radius of 1675mm and reach
stroke of 602mm (1.4 ton model). The steering angle of 90。in each direction enhances maneuverability. These
specifications ensure improved safety clearances in confined spaced with high loading.
6. Low noise, less pollution and energy saving, these features match up with environment protection
requirement.
|
|
The outstanding features of the HUBTEX ESW series 4120 fork-lift reach truck are a compact design and a most progressive technology. The ESW offers multi pack handling over conventional reach trucks to maximise stock rotation by a combination of high lifting capacities and long battery running times. The HUBTEX series 4120 with capacities from 3500 kg to 6000 kg is an alternative solution to conventional fork-lift reach trucks with restricted standardized capacities.
|
|
|
Widely recognised for their ability to get more work completed in less time, RX Series reach trucks are now stronger and better equipped to answer demanding materials handling requirements. Powerful hoist-pump and traction motors produce faster lifting and travelling speeds for greater ail-round performance while the new microprocessor controlled LCD instrument panel provides the operator with vital truck information. Available in sit-down models - with load capacities
|
|
|
|
|
|
The XR09 has been designed for high levels of productivity due to high rest capacities and narrow working aisles. All trucks are built in full compliance of the European Machine Directive.
Driving seat: ¦ Damped seat, adjustable according to the height and weight of the operator. ¦ Multipurpose Liquid Crystal Display showing information relating to the operation of the machine and the optional equipment. Standard: Battery charge indicator / Hourmeter / Selected functions / Warning lights / Drive wheel position indicator. Optional: / Forks height indicator / Pre-selector. ¦ Due to their ergonomical arrangement all electrical and hydraulic functions can be operated with ease. ¦ Visibility through the overhead guard is excellent to ensure accurate pallet placing.
Chassis: The use of robotically welded and automatically profiled material enables high quality and modern design. Detailed study of the chassis has resulted in a low centre of gravity, ensuring maximum stability in all driving and stacking manoeuvres, offering high residual capacities at maximum height.
Traction: Robust, powerful three phase motor delivering 6 kW (KB 60 minute).
Hydraulic system: Powerful three phase motor delivering 11.5 kW (ED 15%). Pump with internal gear for quiet running. Hydraulic functions calibrations due to proportional valve technology to ensure exact and easy movements. Synchronous movements are allowed.
|
|
C1.0-1.5 Series, very narrow aisle (VNA), man-up turret trucks
The C series of VNA trucks allows you to optimise warehouse storage space. These models are the perfect solution where warehouse space is limited and goods are stored at very high levels, in very narrow aisles.
The truck’s construction is highly reliable and robust which is key when operating at height. Advanced ergonomics boost operator comfort and confidence leading to outstanding productivity, while powerful AC motors deliver fast travel and lift speeds to maximise load handling and throughput.
|
|
The SLT 30/35 is a very narrow aisle forklift truck that can increase your warehouse size by 50%. It enables you to be more efficient in product storage without adding on to your warehouse. Landoll Corporation also offers cold storage solutions.
**Landoll Corporation is located in Marysville, KS USA specializing in Very Narrow Aisle Forklift solutions for warehousing operations. The Landoll produced Bendi and Drexel SwingMast forklifts provide maximum utilization of storage space by reducing aisle size while still performing the jobs of a front loading forklift. This includes loading and unloading trailers, going from dock to rack, climbing ramps and working in a variety of operations. These trucks stack 60" aisles with lift heights up to 36'. Verry Narrow 64" Aisles versus Wide 144" Aisles = 12 warehouse rows vs 8 rows = 50% increase in storage. Landoll Corporation has been in business since 1963 offering Quality Products to Quality People**
|
|
The Landoll B3/30 - The Bendi articulating forklift stores standard pallets in aisles from 1676 to 1828 mm wide. This new range features a Curtis control system consisting of Separately Excited Traction Controls, Hydraulic Controller, foot accelerator and DC to DC converter. Capacities at a 24" (600 mm) load center are 3,000 lbs (1363 kg). Lift heights are available to 360" (9.14 M). The main features of the new control system include:
- Easily programmed for specific customer's needs regardless of application
- Extended motor life and optimized power usage
- Ramp restraint safety feature automatically limits speed down ramps
- Regenerative braking
- Selectable "Economy Mode" feature increases single charge run time by 25%.
|
|
Very narrow-aisle (VNA) articulating Bendi electric forklift truck Landoll
3,000 lb. (1363 kg) to 4,500 lb. (2045 kg) capacity
The Bendi 4 wheel articulating forklift stores standard pallets in aisles from (72”) 1.8 to (84”) 2.13 M wide depending on model and lift height. This 4 wheel model range features an AC control system and Motors for Traction and Hydraulics. Four new models are available with this new control system: B30AC - B40AC - B45AC – and B45AC-HL. Capacities at a 24" (600 mm) load center are 3,000 lbs (1363 kg) to 4,500 lbs (2045 kg). Lift heights are available to 433" (11 M).
|
|
Warehouses designed for these high-throughput lift trucks achieve immediate cost savings and long-term efficiencies. Compared to conventional forklifts, a Raymond®Swing-Reach truck's high-level pallet handling and case-picking capability could triple your storage capacity
Maneuvers in very narrow aisles with unmatched throughput
Twin tubular mast design provides optimum rigidity when traveling loaded and elevated.
Dual I-beam construction and a wide footprint keep the operator's platform rock-solid, even at the highest elevations.
intelliguide wire guidance option relieves the operators of steering responsibilities in very narrow aisles, freeing the operator to concentrate on load handling tasks.
Raymond's patented intellispeed control system provides smooth coordination between travel speeds and load height and weight, and automatically governs the appropriate maximum speed.
Large loads up to 48" deep by 108" wide can be handled in aisles as narrow as 68".
|
|
| ... products without technical information |
| |
|
|