|
|
| Products 91 to 120 of 126 |
Hoist Tipper
ERI series
The ERI hoist tipper series is used to lift and tip up to a maximum quote of 3m, to unload industrial caissons which hold a maximum of 3000kg ; the rotating angle of the caisson can reach 130°. The loading of the caisson is carried out by using a lift truck or a transpallet. The machine has a reduced encumbrance seen from above and does not have any lateral protrusions which can be dangerous for workers. The upward and downward speeds are singularly regulated.
ERI-TCV series
By applying a hopper with a vibrating channel which doses the pieces towards the interlocking point to the base model, it is possible to realise hoists with vibrating dosers. This series of equipment has an electro-hydraulic action. This equipment can be adapted to the different needs of the customer.
|
|
|
|
|
|
Rotary tables - A simple and cost efficient solution to accumulation.
SOCO SYSTEM´s rotary table is suitable for accumulation of e.g. retail products.
The operator is free to perform other jobs, while, at the same time, interruption of the arrival of products is avoided.
Rotating on the table, the articles are constantly within easy reach. A rational work station offering correct working conditions.
A fan directs the products, and the table is prepared for side guides.
The legs are height adjustable.
Specifications
Diameter: Ø 1200 mm.
Height: Min. 715 mm.
Speed: Standard 6.00 rotations per minute. Upon request 3.77, 2.81 and 2.20 rotations per minute are available.
Adjustable speed control can also be supplied.
Table top: Plastic-laminated. A solid plastic plate specially suited for the food industry is available upon request.
Please contact our sales department.
Braked castors: SOCO SYSTEM castors are of sturdy construction with efficient brakes that lock in the direction of travel and rotation.
Standard on SOCO SYSTEM rotary tables.
|
|
|
|
|
|
Turntables collect, buffer and decollate products
Continuous conveying means are sought after again. Users recognise that things in material handling don't work without mechanics. "Lean production" comes with "lean-handling of materials"". Computers and robots alone cannot accomplish this.
"Turning tables" are a tool of choice in only a few companies, e.g., to avoid congested material flow, to balance variations in cycles, or to simply buffer parts, workpieces or other unit loads for manual activities.
"TRAPO's turntable" can be installed as stationary as well as mobile "on wheels," thereby proving its "flexible“ application.
Therefore, if any kind of materials need to be collected, buffered or decollated, there is no way around this versatile turntable. Additionally, it can later be very easily integrated into existing lines.
Upon request, the turntables can be fitted with suitable intakes or transfers from or onto conveyor belts and machines. Additionally, we are available for consultations on a case-by-case basis for complex situations.
|
|
Koike Aronson / Ransome manufactures a complete line of gear driven welding turntables which maximize both safety and production with load capacities ranging from 250 to 120,000 pounds.
Koike Aronson / Ransome Floor turntables are a simplistic and rugged solution to obtain 360? of constant or variable speed powered horizontal rotation for weldments or assemblies.
Many variations in speeds, controls, table size, heights as well as robotic applications are available. Special engineered turntables are always available.
MACHINE FEATURES
Large bull gear design for dependable rotation
Capacity ranges from 1,000 to 120,000 Lb
Backlash maintained to within .002 In/In Radius
|
|
Presto offers two types of "stand alone" turntables: the Low Profile Turntable (LPT) and the Presto Ring Floor Mount Turntable (RFT).
The LPT sits on the floor and has a tapered edge to allow hand pallet trucks to roll up onto it and place or remove a pallet.
Features
- 7/8" high allows for pallet jack loading
- Outer ring notch allows for lifting turntable off the floor for easy relocation
- No lagging required
- 4000 lb capacity
|
|
We produce the following equipment:
- Air cushion transporters of all sizes, up to a load of 1000 tons, with friction wheel drive and automatic , proportional air volume regulation of the air cushions and with the following options:
+ direct or remote controlled
+ wireless with infrared - or radio control unit
+ full automatic with induction loop or passive guiding tape
- Air cushion special equipment and devices (also for explosion-protected areas)
Here are some examples of our products based on air-cushion technology:
-Turntables
|
|
LIFTING TABLE WITH "U" SHAPE
Mobile lifting table on rails specially designed in accordance with the customer specifications. This table eases maintenance operations and specifically the laying and reassembling of bogies of tramway or railway rolling stock.
Main characteristics of the "U" shape platform shown on the photo :
Lifting capacity : 6000 daN
Platform dimensions : 2,500 m x 1,900 m
"U" dimensions : 1,700 m x 0,900 m
Collapsed height : 0,700 m
Vertical stroke : 0,950 m
Feeding : tri-phased
Main options : motorization on rails, batteries supply, radio-control.
FOR ANY SPECIFIC REQUEST, CONSULT US.
Fields of application :
Maintenance operations on railway equipment : metro, tramway or road vehicles. Changing of components, accessories, motors, compressors under different vehicles. The shape of the platform makes easy the access for the operator to the working point.
|
|
| ... products without technical information |
| |
|
|