|
|
Oil hydraulic systems and lubrication circuits demand circulation pumps for various applications. Main request for such pumps is an operation with little pressure ripples and low noise emissions. Gerotor pumps are an excellent answer to these requirements. This design based on the principle of internal gear pumps features low noise emissions and little susceptibility to particulate contamination, thus makes it an ideal pump for off line filter units.
BFP series
Low noise emission
Good suction pressure
Compact dimensions
Low sensitivity to particulates
Ideal for the use in off-line filters and coolers and for the circulation of lube oils
|
|
|
|
|
|
The PFVI series is a fixed displacement vane pumps for applications for industrial hydraulic equipment. The PFVI is a 12 vane design rotating group that has been engineered for quieter operation for the in-plant industrial environment.
The Parker fixed displacement vane pumps are of rugged cast-iron construction and are less sensitive to system contamination than most other hydraulic pump designs. The vane design produces a more smooth supply of oil that minimizes "hydraulic ripple". A desirable feature in all hydraulic systems.
PFVI vane pumps are hydraulically balanced designs that reduce bearing loads thereby minimizing maintenance and maximizing service life. The cartridge style design of the rotating group allows for quick and cost efficient servicing.
Combining this broad selection of fixed vane pump displacements and optional features with Parker's complete offering of gear, piston and variable vane pumps enables selection of the best pump for your demanding hydraulic requirements
|
|
turbine pump - JEV302 to JEV311
Application sector:
Transfer: water, seawater, fuel oil, Diesel, oil (SAE30 at 30°C)
Industry, agriculture, construction, etc.
Pump characteristics:
- Self-priming pump
- Flow inverter (dual direction of rotation)
- Ambient temperature between -15°C and 40°C
- Maximum relative humidity 80%
- Maximum liquid temperature: 90°C
- Maximum inlet height: 5 m
JEV302/303: Opening diameter 1" + 25 mm diameter sleeves - weight 13.2 kg - max flow rate 5.9 m3/hr - max height 42 m
JEV304/305: Opening diameter 1"1/2 + 30 mm diameter sleeves - weight 12 kg - max flow rate 5.3 m3/hr - max height 15 m
JEV308/309: Opening diameter 1"1/12 + 40 mm diameter sleeves - weight 14 kg - max flow rate 9 m3/hr - max height 17 m
JEV310/311: Opening diameter 2" + 50 mm diameter sleeves - weight 21 kg - max flow rate 15 m3/hr - max height 24 m
|
|
|
|
|
|
BROADVIEW, IL, Simplex has introduced its new G1 Series power pump platform. Starting at 30 lbs., the new G1 power pumps are extremely lightweight and easy to transport. These portable electric hydraulic pumps offer pressures up to 10,000 psi (700 bar), and are ideal for a broad range of industrial / MRO and construction applications.
G1 Series models are available in standard and bolting pump configurations. These pumps are powered by a ½ HP, 115 or 230VAC universal motor, capable of operating on as low as 80VAC. Powerful enough to start under full load, the two-stage pump operation provides optimal flow for tool advancement, increasing your productivity. G1 series pumps are ideal for use with small to medium size hydraulic cylinders and tools.
Key standard features available on all 10 models include an integrated hand pendant with a 15` cord and a one gallon steel or plastic reservoir. A variety of valve configurations are available on our standard pump models, including dump and, two, thee and four way manual. Our bolting pump includes polarized couplers and a pump mounted gauge which makes these a turnkey configuration for torque wrench applications.
Like all Simplex products, the new G1 Series pump is exceptionally dependable and backed by the Simplex "No Small Print Warranty".
For more information and a free catalog, call 1-800-275-5225. Fax 1-708-865-0894. Or write to Simplex, 2525 Gardner Road, Broadview, Illinois 60155. A copy of the catalog can also be downloaded from the Simplex website www.tksimplex.com.
|
|
Hand Pump HYDRAULIC P SERIES
• All metal construction won't burn through in welding environments.
• Two-speed reduces handle strokes so you work faster and easier.
• Formed metal handle provides less flex, and reduces operator fatigue.
• Convenient fill port allow pumps to be filled in a horizontal or vertical position.
• Relief valve inboard of check valve prevents loads from drifting down.
• Large valve knob gives added control for slowly metering loads down.
|
|
PUMP SIMPLE EFFECT HAS DOUBLE FLOW WITHOUT TANK
- Hand pump steel, compact, light, resistant.
Fixing ensured by 4 screws.
It is appropriate to supply the jacks simple effect including race and of important size.
- Important Flow for a better productivity. For a jack having a piston of Ø 50 mm = advances of 1 cm per blow of pump.
- The manual pump with two flows: automatically passes from the function advanced to the focntion work, it automatically passes from the function advanced to the focntion work.
- Equipped with a valve of limitation of pressure for safety in the event of overload.
- Decompression with wordwrap.
Characteristics:
- Pressure (in low pressure): 50 bar
- Pressure (in high pressure): 600 bar
- Flow by blow (in low pressure): 21 Cm3
- Flow by blow (in high pressure): 5 Cm3
|
|
"Compact Brawn"
* Inlet and Delivery Check Valves are Positively Seated for High Efficiency
* Hardened Steel Pistons Located in Stationary Cylinder Allow for High-Speed Operation
* Integral Supercharge Pump
* Thru Drive Available
* Rugged, High Response, Lightweight Poppet Construction Assures Long Life
* Multiple Deliveries
|
|
he feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief valve. The charging pressure of this valve starts at approx. 20% below nominal pressure setting, which causes a reduction of the flow rate in this pressure range. Please follow Operating and maintenance instructions.
SPECIAL FEATURES
- vane type pump for low pressure range
- direct drive, i.e no bell housing or coupling required
- compact design
APPLICATIONS
- filter circuits
- cooling circuits
- lubrication applications
- pump transfer units
|
|
Our hydraulic equipment plays an essential role in power and controlling in the constructionmachine industry.
With a tightly knit international network, NACHI EUROPE GmbH is excellenty positioned to build your sucess in the European marketplace.
NACHI, the comprehensive mechatronics manufacturer with a long tradition and innovative technology helps you enhance your business potential in Europe.
|
|
Sauer-Danfoss offers a wide variety of open circuit products. Our fixed and variable displacement pumps provide power for work functions of on- and off-highway vehicles and equipment in the fields of agriculture, construction, material handling, many others.
Fixed displacement gear pumps and motors and variable displacement piston pumps are a perfect choice when equipping applications like forklift trucks, tractors and road rollers.
Our portfolio includes tailor made pump solutions, in which several functions are integrated in one body to optimize size and cost. By combining products we can offer system solutions for buses, wheel loaders and other heavy equipment.
|
|
|
|
|
|
FEATURES:
Full Pressure Shaft Seal — The Parker full pressure input shaft seal is able to withstand full system back pressure up to the pressure rating of the Hydraguide. This enables operation of auxiliary hydraulic functions downstream of steering.
Linear Valve Spool — The linear valve spool is less subject to stick and damage in the event of system contamination and allows generally better control.
Pressure Dams — Pressure dams provide a barrier of pressurized system oil between metered oil and return. Pressure dam valving provides more precise steering due to the reduction of lost leakage oil from the metering element.
Vaned Rotor — The spring biased vanes in the rotor tips reduce leakage between pockets in the metering group. This provides more precise and positive steering.
Pressure Balanced Metering Group — All Parker designs utilize a pressurized envelope around the metering package (rotor set—commutator) to reduce slippage leakage and provide more precise steering control.
Manual Emergency Steering — A ball check valve allows manual steering in emergencies when pump flow is interrupted. If the vehicle is large enough to require more than 100 ft.-lb. steering wheel torque in the manual mode, another means of emergency steering is recommended.
|
|
Piston pumps for
truck hydraulics
SC fixed displacement up to 108 cc
SCT fixed displacement up to 130 cc
The Compact Line has been developed to
offer high maximum rpm, high pressure,
high efficiency, low noise level and to
occupy a very small mounting space
|
|
Vane Pump - SAE - Denison
• 320 bar max pressure for T7B, 300 bar for T7AS* & T7D, 275 bar for T6C & 240 bar for T7E
• Silent technology even under high pressure
• Wide range of displacements• User friendly = easy conversions & evolutions
• Wide number of shafts available (SAE & ISO)
• Rear drive train options available (SAE A, SAE B or SAE C)
|
|
Our vairable displacemnet vane pump series have designed seven different out put flow for various
application. Such as 8, 12, 15, 20, 23, 26, 30 and
60 litre per minute at 1800 RPM
Pressure adjusting range:1. 5-18 kgf/cm2
2. 15-35 kgf/cm2
3. 30-55 kgf/cm2
4. 50-70 kgf/cm2
Application: CNC Machine Tool, special purpsoe machines
and all cuting machines.
For double pumps and all dimensions, please visit our
web site: www.kcl.com.tw
|
|
|
PVL are variable displacement vane pumps equipped with mechanical compensator for outlet pressure and max displacement adgustment. these low noise pumps are available in 3 different size, have flange ports according to ISO 3019/2 and are designed to operate with anti - wear oil
|
|
|
|
|
|
XVARI Technology
The breakthrough in hydraulic pump technology & ergonomics
Tremendously high oil delivery, precise control and ergonomic operation; three characteristics of the new XVARI® Technology pump developed by Enerpac. Never before have these three vital product characteristics been combined in one hydraulic pump. With XVARI® Technology, Enerpac has again set a new industrial standard for succeeding the 50-year old technology of current air-over-hydraulic foot pumps. The XVARI® Technology replaces the popular and widely-used linear air motor technology with improved ergonomics, precise metering of the hydraulic oil flow and also offers a higher oil delivery for increased productivity and efficiency.
XVARI ~ Be in control
XVARI® Technology enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract mode and thereby the speed of the hydraulic cylinder or tool that the pump is powering - specifically for jobs that require accurate load positioning, aligning and controlled descend. XVARI® Technology enables the user to better control the hydraulic application, improves productivity, enhances process quality and makes the workplace safer.
|
|
OLMEC pumps are used to supply pressurized oil, emulsion or water circuits, and hydraulic users operating in on-off mode.
These pumps operate with reciprocating motion, single-acting or double-acting, powered by a pneumatic control valve which stops when the maximum hydraulic pressure is reached, maintaining the pressure in the circuit without further air consumption. If the hydraulic pressure drops, the pump is automatically restarted to restore the preset hydraulic conditions.
The most common fields of application are:
hydraulic tests on seals and resistance with oil or water;
supply of cylinders for clamping, assembly and maintenance equipment;
fixed or mobile emergency work units;
oil or grease lubrication systems;
all environments with explosion risk;
Laboratory testing;
|
|
The pneumatically hydraulic high-pressure pumps of the series PMA are laid out for the promotion of liquids with pressure up to 2.400 bar, at a pneumatics printing of 7 bar. These high-pressure pumps become everywhere there
begun, where compressed air is available as energy source and where a high and/or highest hydraulic printing is needed for test or for test purposes and/or for other applications. With compression tests the systems which can be examined are filled, aired out with a suitable liquid (oil, emulsion, pure water) under low pressure and brought afterwards by the Madan PMA of high-pressure systems on the desired pressure. All pumps of the Madan PMA series are supplied in rustproof execution (high-grade steel material 1,4401). Thus long life span and maintenance-free operation are ensured.
|
|
Low pressure pumps
Applications: Transport and circulation of liquids with lubricating properties,
like e.g. lube oils, fuel oils and synthetic and vegetable oils.
The ACD pumps are used for a number of different fluids:
Lubrication oil, fuel oil, vegetable oil, hydraulic oil and other hydraulic fluids,
glycols, polymers, emulsions, and any nonaggressive fluid with some lubricating properties.
Typical application are:
• Lubrication of diesel engines, gears, gas and steam turbines, hydro turbines, paper machines.
• Circulation for cooling and filtration in large machineries and hydraulic systems, pumping transformer oil for insulation in transformers.
• Transfer onboard ships, in oil factories, refineries, tank farms etc.
|
|
Model: 50 T and 150T
running speed from: Max. 1800 L/min. Min. 900 L/min.
Max. Pressure from 70 to 105 kgf/cm2
Delivery flow at no load pressure: from 9 to 139.6 L/min.
Application: special for surface grounding machine and
rubber machines.
For detail dimensions, performance characterisics please
visit our web site: www.kcl.com.tw
|
|
The latest design in the proven K3V series, the medium pressure, K3VL pump has been developed for the mobile and industrial market where noise, efficiency, controllability, extended pump life and reliability are all considered essential.
Pioneering noise reduction technology along with features such as high efficiency, compact design, high power density, large self priming capability, long life, and a wide range of control options give rise to exceptional overall specification and performance.
Available in SAE and ISO mounting options, this low noise, medium pressure, variable displacement, open circuit pump provides the opportunity to share in the future of hydraulic pump technology.
|
|
PB 32.5 fixed displacement
Displacement: 0.0027cu.in/rev
(0.045cm3 /rev)
5080PSI (350bar)
5000rpm
3 pistons
Maximum operating temperature: 392°F (200°C)
Weight: 0.66lbs (0.3kg)
Rotates either CW or CCW
Excellent suction properties
The following may be modified on request:
■ input and outlet ports,
■ mounting flange or thread,
■ drive shaft,
■ addition of a filter/screen.
|
|
|
Haskel International has nearly 60 years of hydraulic and pneumatic engineering experience in the design and manufacture of air driven liquid pumps. Continuous investment in new machinery and technology keeps Haskel at the forefront of the field.
|
|
Lee Pre-Set and Variable Volume Pumps are the solution for automated chemistry systems. Designed for "install and forget" operation with outstanding features and performance.
* Standard volume ranges: 50 µl, 250 µl, 750 µl per full stroke
* Full volume dispense as fast as .3 seconds for Pre-Set Pumps, 1 second for Variable Pumps
* Low Power Consumption means less heat in the cabinet to manage
* Long Life -- Millions of cycles
* Compact -- Made small to fit inside the machine, near the chemistries
* Light Weight -- Made light to fit on moving arms, gantries, etc.
* Robust construction
* Many custom configurations possible
* 100% inspected and function tested
|
|
PMP - Mini pumps
• Two models for connecting either one (PMP1211) or two tools (PMP1221).
• Operates one tool at a time.
• Black painted protection frame with rubber feet.
• Effective cooling during operation.
Mini pumps are the right choice when there is need for small and portable pumps for quick rescue tasks. When space is highly limited and therefore valuable, a mini pump may be the solution for your tool problem.
|
|
|
|
|
|
A large input shaft diameter allows more through put power, even with an integral charge pump. When the 350 series pump is fully loaded as much as 56 kW (75 hp) of through put power is available for auxiliary hydraulic power needs from the SAE B auxiliary mounting pad.
350 Series pumps operate at a level of quietness that exceeds the requirements of today's demanding work conditions.
Another pump feature - a serviceable, bimetal valve plate - improves pump filling characteristics which, in turn, reduces fluid-borne noise and extends pump life. A highly engineered pump housing and swash plate also minimizes noise and vibration.
Mounting flanges are offered in SAE B and C configurations and ports are offered in SAE, ISO tube and flange and STC direct port versions. Opposite or same side port versions are available to facilitate plumbing and help the pump fit your machine space needs. An integral gerotor charge pump can be provided with up to four different displacement sizes allowing for either remote or inlet charge filter options. The 350 series pump offers a full range of product features and has the ability to match the needs of many different customer platforms. It supports increased power requirements in Agricultural, Construction and Utility markets and allows for a wide variety of installation opportunities for global machine design.
|
|
Why use a variabledisplacement pump?
•precise control of all movements ;
• multi-function capabilities: simultaneous movements, all independant
of load ;
• avoid problems of fluid overheating ;
• reduce energy consumption.
Variable displacement : only advantages !
Installing a TXV variable displacement pump will transform your hydraulic equipment. Slow or rapid movements are done with precision, to the constant adjustment of pump flow rate. The TXV ranges are the result over 40 years' experience in hydraulic pumps. HYDRO LEDUC, France's leading pump manufacturer, is proud to present these high performance products.
|
|
SC 75/75
Dual-flow pump for truck hydraulics with need of big flows, for example forestry applications.
The Compact Line is suited for demanding applications with its high torque, high pressure, high efficiency, low noise level
and very small dimensions
|
|
The Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built in inlet strainer, pressure switch, and check valve, and supplies smooth flow from tricke to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.
Features::
• Integrated pump and tank system
• May be mounted vertically or horizontally
• Flow rates up to 4.5 US Gallons/min (17 Lires/min)
|
|
Type PR4-Mini:
- Sizes 0.4 to 2.0
- Radial piston pump with 3 pistons
- Very compact build, hence installation-friendly dimensions
- 5 sizes
Type PR4:
- Sizes 1.6 to 20.0
- Radial piston pump with 3, 5 or 10 pistons
- Self-aspirating, valve-controlled
- Long bearing life due to hydro-dynamically lubricated plain bearings
- Several pressure ports with various cylinder combinations possible
- Optional combination with fixed and variable displacement vane and axial piston pumps
-14 sizes, favourable gradation for optimum matching to the application at hand
|
|
|
|
Hydraulic pumps
