|
|
Industrial gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy.
The wide choice of shafts, flanges and ports, in compliance with all international standards (SAE, DIN and EUROPEAN) allow for their use in an infinite variety of applications. |
|
With our Aluminium Gear pumps manufacturers and Motors we can offer a complete product range for a wide arrenge of applications
High efficiency
Cont. pressure up to 275 professional bar admissible
Low noise
Wide choice of integrated cocks |
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
Characteristics:
- Open and/or closed circuit
- Displacement 5 to 1000 cm3
- Nominal pressure up to 450 bar
- Maximum speed up to 11,000 rpm
- Maximum power output 933 kW
Our versatile transmissions for mobile applications can be combined in a variety of ways with pumps, motors and open or closed loop control devices to offer the optimum design for every drive application and every power range.
Key advantages:
- Infinitely variable speed setting at fixed or variable input speed
- Immediate, jolt-free change in direction of rotation
- Simple, ergonomic operation
- High turnaround
- Automatic torque conversion
Axial piston pumps and motors are used for the travel drive and working hydraulics in a wide variety of mobile machines. |
|
The T1-51, -81, -121 fixed displacement pumping has been specifically developed to meet the requirements of professional light duty professional truck applications with short, non-frequently operating cycles such as tippers and small loaders.
Input power up to 71 kW
Industrial shaft speed up to 2300 rpm
Operating pressure up to 350 professional bar
High overall efficiency
Low weight
Small intalled envelope
Proven reliability
Easy servicing |
|
| Complete range of variable displacement axial piston pumps, with swashplate system, for closed loop transmissions. All pumps meet the need for continuously changing speeds, optimise the use of power and torque based on operating requirements, with hydraulic, mechanical, electric and electronic servo controls. |
|
Dynex pumps operate at pressures to 20 000 psi (1380 bar). The checkball design, with individual piston check valves supplier, provides increased life and performance essential in critical environments.
These pumps are ideal for difficult conditions including:
High pressure and excessive pressure spikes;
Special fluids including Skydrol, water glycol and MIL-Spec fluids;
Dirty environments and contaminated fluids;
Extreme temperature ranges;
Long, difficult duty cycles;
The piston check cocks direct flow from the inlet side of the pump to the pump outlet port. The positive-seating valves provide better wear and greater volumetric efficiency, especially at high pressures. Bi-directional shaft rotation delivers constant direction of flow regardless of drive shaft rotation.
Specifications:
Fixed displacement -
Flows from 0.21 to 54.0 U.S. gpm (0,79 to 204,4 L/min) at 1800 rpm,
Pressures to 20 000 psi (1380 bar)
Variable delivery-
Maximum flows from 12.2 to 61.4 U.S. gpm (46,2 to 232,4 L/min) at 1800 rpm,
Pressures to 8000 psi (560 bar) |
|
Manufacturer of gear pumps made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1 |
|
Single or Multiple configurations
Flows to 29 gpm @ 2400 rpm with pressures to 3000 psi
Motors up to & over 40hp
|
|
S.A.M. HYDRAULIK has recently extended it’s pump range with two new closed circuit Hydrostatic piston pump manufacturers projects (MD10V and SH6V), innovating and versatile.
All the types are available with different controls (hydraulic, manual, electric) and the predisposition for mounting of subsidiary pumps.
The SH6V series pumps can work at maximum pressures (up to 450 bars /6500 psi) with displacements from 50 to 130 cc/rev (3,05 – 7,93 cu-in).
It replaces the HCV series, with improved performance and optimises the relationship of quality/prices. Thanks to several accessories and controls it is extremely flexible and in a position to satisfy the requirements of a large number of applications in the most demanding application areas: building, material’s transport, agriculture, forest, mining and hearth moving machine and so on.
The brand NEW MD10V series of pumps identifies axial piston pumps with Medium Duty pressure requirements (250 bars/3600 psi continuous duty & up to 350/5000 psi bars peak duty) with displacements from 14 to 64 cc/rev (0,85 – 3,90 cu-in).
This product complements the range, giving the possibility to satisfy new market sectors.
The principal applications are: building and earth moving machine, municipal application machines, agricultural machines and so on.
|
|
| External gear units are classic hydraulic units and come in the form of pumps and motors. Individual pumps, multiple pumps and lownoise SILENCE versions in seven different series open up a virtually unlimited range of possible uses. |
|
Fixed displacement bent axis manufacturer of piston pumps.
STRADA pumps are ideally suited for PTOs applications in vehicles.
Displacements from 2.49 in³/rev (40,9 cm³/rev) to 6.71 in³/rev (110 cm³/rev) available in groups 32 and 37.
Max. peak pressure up to 5800 psi (400 bar)
Max. speed up to 2950 min-1 |
|
PL PUMPS
Fixed displacement
For open loop circuits
Up to 450 bar [6 530 PSI] pressure
Sizes 10 to 444 cm³/tr [0.63 to 27 cu.in/rev]
In line radial pistons
High speed for engine drive
High efficiency
High durability
Independent output flows |
|
The F1 offers many additional values for operators of cargo cranes, professional hook loaders, skip loaders, forest cranes and heavy duty demanding professional truck applications.
Higher selfpriming speeds
Operating pressures to 400 professional bar
New frame sizes to meet market requirements
Higher overall efficiency
Increased reliability
Reduced noise professional level
Smaller installation dimensions
Series F2 is a further development of the twin-flow version of Series F1, the very first bent-axis truck pumping on the market with two entirely independent flows. Typical applications include large truck loaders, forestry cranes, hook loaders, refuse collecting vehicles, concrete industrial mixers and tipper/crane combinations.
Less energy consumption
Reduced risk of system overheating
Lower weight
Smart system solution means easier installation
High overall system efficiency |
|
Industrial gear pumps and motors made of cast iron in two pieces.
A rigid and compact structure that makes it possible to incorporate a number of functions in a limited space.
Wide range of displacements: from 0.30 in³/rev (4,95 cm³/rev) to 9.20 in³/rev (150,79 cm³/rev) available in groups 20, 30 and 40
Max. peak pressure up to 4785 psi (330 bar)
Max. speed up to 4000 min-1
High operating pressures
High efficiency at high temperature
Low noise emission
Exceptional working life expectancy
Solid and compact design
Custom design
|
|
Axial piston units are available in the form of pumps and motors in bent axis design or swashplate design for medium- and high-pressure ranges. They are the main components in the hydrostatic transmission. Compact size and high power density, economy and reliability are characteristic advantages which speak for the use of hydrostatic transmissions, together with the fact that they meet the demand for high speed and high torque, as well as optimum efficiency.
|
|
Dynex high-pressure pumps operate with extended life at pressures from 8000 to 20 000 psi (560 to 1380 bar). These pumps accommodate more force in a smaller package. At lower pressures, they provide the life and performance margin essential in critical environments.
The checkball design uses individual piston nonreturn valves, which direct flow from the inlet side of the pump to the pump outlet port. The positive-seating action of the check cocks provides better wear and higher volumetric efficiency, especially for high-pressure operation.
Variable pressure-compensated models are available for operation to 8000 psi (560 bar). In these efficient models, fluid flows through the pump, back to tank at relatively low pressure. This design provides stabilized temperatures with little increase in heat, even when compensating for long periods.
Fixed displacement pumps -
Flows from 0.21 to 54.0 U.S. gpm (0,79 to 204,4 L/min) at 1800 rpm,
Pressures to 20 000 psi (1380 bar)
Variable delivery pumps -
Maximum flows from 12.2 to 61.4 U.S. gpm (46,2 to 232,4 L/min) at 1800 rpm,
Pressures to 8000 psi (560 bar)
|
|
Feature:
Max. Pressure:245 kgf/cm2
Max. Speed :1800 RPM Min. Speed: 600 RPM
Application: Manufacturer of hydraulic press machine, fishing boat,
lift truck, plastic injection machine.
For detail product dimensions, performance characterisitics and order code, please visit our web site:www.kcl.com.tw |
|
Rated to 3000 psi. Spline or keyed shafts, side or rear porting, dual rotation available on standard models. Pressure balanced loading plates on either side of professional gears for maximum efficiency.
|
|
Leakage free, sealless structure
The pump mechanism is the magnetic drive type. Free of leakage trouble, the pump is suitable to be incorpotated in various equipment.
Superior corrosion resistance
The wetted parts are manufactured from superior corrosion-resistant materials such as stainless steel, PPS, and PEEK. Therefore, the pump can be used to transfer various types of chemical solutions.
Long life design
Each part that is precision processed using Iwaki's original technology excels in thermal resistance, therefore does not cause pump troubles due to thermal expansion of the parts. Even when operated for long continuous hours, the pump should exhibit superior durability.
|
|
|
|
Hydraulic pumps
