|
|
| Products 91 to 120 of 168 |
Features:
- Allows for heavy EUT loads in both Elevation (75lbs) & Azimuth (600lbs)
- Variable Speed in both Elevation & Azimuth
- Continuous Rotation allowed in both Elevation & Azimuth (with optional components)
- Low RF Cross-Section materials above drive units
- Portable (no permanent installation necessary)
- Remote Azimuth Drive Option
- Height customer defined
- Fiber Optic connections to Controller (requires SC104V System Controller)
- GPIB full control
- CUSTOM EUT mounts
|
|
Series TLP
Toothed belt or spindle drive linear modules with Outer aluminium roller guid for high dynamical applications up to 5m/s with light and medium loads. Very smooth and silent running.
Consists of:
- Anodized Aluminium body
- External Aluminium roller guide
- Integrated toothed belt
Features:
- Fast and dynamic movements
- Light and compact design
- Cassettes with felt seal
- Strokes up to 3400 mm
- Toothed belt inside aluminium housing with steel cover
|
|
Positioning Table is a slim linear slide actuator that incorporates either ground or rolled ball screws in a U-shaped track rail.
Without extra design work, tpu can obtain ball screw driven positioning table with stable high accuracy and rigidity.
|
|
|
|
|
|
MACRON Screw Driven Positioning Tables are flexible positioning systems consisting of highly accurate ball screw drive assembies providing precise linear motion in both horizontal and vertical operation.
Superior Performance
MACRON Ball Screw Positioning Tables are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation. The positioning table housings are cast from rugged yet lightweight aluminum. The drive assembly connects the motor to the table with a highly durable rolled ball or acme screw. This screw drive design offers superior performance including precise positioning, high moment loads and zero backlash. When selecting a screw table, important specifications to consider include length of travel, rated load, positional accuracy and maximum rated speed. MACRON Positioning Tables feature travel up to 48 in., loads to 2,000 lbs., accuracy to +/- 0.005 and speeds of up to 18 inches per second.
Components or Complete Systems
MACRON Positioning Tables are available as a single axis solution, assembled for a multitude of X-Y and X-Y-Z positioning duties or as part of a complete mechanical motion system. Many optional features are offered including screw pitch, ball nuts, acme bronze and plastic nuts, preloaded nuts to reduce backlash, custom motor mounting and various rail options for the linear bearing. There are several motor mounting options for MACRON Positioning Tables. Typical mounting consists of an integral Motor Mount and a motor adapter NEMA 23, 34 or 42.
|
|
|
The 130 series tables are designed to maximize performance while minimizing physical size and cost. These tables use a low friction, preloaded, recirculating linear ball bearing system, which rides on a single precision ground linear rail. The single linear rail is mounted to a precision machined aluminum base, which offers a rigid support over the entire travel of the table's carriage. The load is mounted to a precision machined aluminum carriage, which has threaded stainless steel inserts for high strength and wear life. There are 30 different acme & ball screw options that offer high efficiencies and long life at an economical price. These tables are designed to allow for numerous options. They include EOT & Home switches, linear & rotary encoders, power-off electric brakes, motor wrap packages, and versatile mounting brackets for multiple axis applications.
|
|
SKF Profile rail guide slides are state-of-the-art tables with high accuracy and high load carrying capacity.
They are available in the following variations:
. ball srew drive or linearmotor drive . four different precision classes . five different sizes
. three different covers to suit the environmental conditions.
Please keep in mind that the preferred range have a delivery time of 2 weeks.
|
|
The compound table 1 from isel consists of two linear guides LES 5 that are connected in rectangular way by two ground steel plates. In this basic version, the linear guides have a travel range of 420 mm. The individual axes are driven by a stepping motor and a ball screw drive with a pitch of 5 mm.
In order to reach very high load capacities, each axis is provided with four linear slides.
In addition to this basic version, it is possible to combine all linear guides LES 5 by means of connecting plates for compound tables from isel. You can choose from different travel ranges, pitches and drive motors to assemble an individual compound table.
The face-milled aluminium T-slot plates form isel are available in the widths 250 mm und 375 mm and in the lengths 592 mm, 692 mm, 792 mm and 1,092 mm. The scope of delivery includes the complete fastening material necessary.
|
|
-Versatile and compact modular-component design
-Carousel or Over-Under working positions
-Precision machined cast iron chemical-nickel plated links
-Precision chordal compensation cams
-High station-to-station accuracy
-Fast intermittent motion
-Vibration free
-Custom index-distance and custom motion available
-Custom options available, including: machined main-frame, line-shafts, cams, synchronized parts-handlers and auxiliary index drives, custom chassis, etc.
-CDS can design and build machine sub-systems to suit customers needs
|
|
Aerotech photonics and fiberoptics nanopositioners are perfect for the high-volume manufacture of photonics and fiberoptics components and systems. Our fiberoptics positioning systems utilize Aerotech%u2019s own brushless linear servomotors for the maximum performance in the most compact package. We manufacture many models of drives and motion controllers to provide a complete fiberoptics and photonics manufacturing package that is virtually maintenance-free and available for 24/7 operation. Aerotech nanopositioners feature the highest closed-loop resolution available with up to six axes of coordinated motion.
|
|
|
|
|
|
Dynamic Structures and Materials (DSM) offers custom design capabilities for rotary and linear flexure-guided stages required for precision motion control and positioning applications and for challenging environments. DSM's flexure mechanism designs are used in unique positioning applications where backlash- and stiction-free performance are critical.
The 3-axis optomechanical positioning mount pictured here is a representative example of DSM's design capabilities for flexure-guided stage design. A custom, multi-axis design required three axes of flexure-guided motion for a 4 kg payload. The design requirements included ± 2 mm of linear travel adjustment in one axis and ± 2° of rotational adjustment in two additional axes. The assembly's design minimizes undesirable motion during temperature transients and shock loading.
DSM designed the optical mount using a titanium and aluminum construction. Fine thread screw adjusters provide manual adjustment capability, although the design lends itself to being easily reconfigured for motorized position adjustment. Pre-load springs and flexure pivots provide return force.
|
|
|
Zaber's T-RS Series of precision motorized rotary stages are stepper motor driven, worm gear rotary stages capable of a full 360° rotation. Each rotary stage has an integrated microstepping stepper motor controller, offering high resolution daisy-chainable operation.
|
|
|
Aerotech lift stages are available with direct drive or lead-screw-based mechanics to provide the ideal solution for your application. These stages feature resolution to 2 nm and travels up to 25 mm, with compact footprints, and are designed for a wide range of positioning applications.
|
|
|
-Velmex now makes UniSlide® Assemblies with dual sliders. These units are useful in application when two objects must share a common axis of motion. In addition, when a left and right hand thread lead screw is specified, the reciprocating action moves the objects together or apart. Uses for this type of motion include centering or mating operations for manufacturing or testing. Guide forks can be mounted to the UniSlide to insure roll goods of different widths are centered precisely. Assemblies are manual or motor driven. Independently driven lead screws are also available.
|
|
Hexapod 6-Axis Precision Positioning Stage
- 6 Degrees of Freedom
- Extremely Compact
- Travel Ranges to 45 mm (linear), 25° (rotation)
- Load Capacity to 10 kg, Self Locking Version
- Resolution to 7 nm
- Min. Incremental Motion to 300 nm
- Repeatability ±0.5 µm
- Velocity to 25 mm/sec
- Vacuum-Compatible Versions Available
The M-824 is the ideal micropositioning positioning stage for all complex positioning tasks which depend on high speed and accuracy in six independent axes. In addition to positioning all axes, it allows the user to define a center of rotation (pivot point) anywhere inside or outside the system envelope by one simple software command.
|
|
|
|
|
|
Gullco Welding Positioners are positive drive rotary turn tables complete with mounting flange, drive and tilt mechanisms and microprocessor based pulse width modulation motor controls. Standard and Programmable models are available.
They are driven by a low voltage permanent magnet motor and gearhead power unit assembly. The microprocessor motor control enables operator interface of start, stop, clockwise rotation, neutral, counter clock-wise rotation and infinitely variable control of the speed, within the range of the model.
Rotation speed is electronically controlled using an optical tachometer located on the back of the gear-motor. Speeds within the range of the model are infinitely variable in both clockwise and counter-clockwise directions through a rotary speed adjustment potentiometer located on the remote control.
Table tilt is manually set at any desired angle, from 0° through 90°, quickly and easily. Safety is greatly enhanced with Gullco’s low voltage (24 V) control and power supply system.
Standard or Purge-equipped units are available and each can be supplied in one of two speed ranges to suit specific application requirements.
These positioners are drilled and tapped for mounting Gullco Model WP-250 or WP-400 Self-Centering Grippers. These are versatile and efficient grippers for pipe, pipe fittings, flanges, etc.
|
|
|
The 300 series tables feature a rigid pair of quality angular contact bearings which produce smooth table top rotation. The low backlash precision worm gear drive provides exceptional accuracy and repeatability. All aluminum components have a black anodized finish and each table can have either a NEMA 23 or 34 motor mount attached. Threaded steel inserts in the table top provide for easy mounting of the user load while the 0.75 inch (19 mm) through hole provides easy access from below.
|
|
|
The RT-5DR manual rotary stage incorporates the use of a precision rotary encoder to provide positional information to a small DRO unit. This is a smart, user-friendly rotary stage alternative to cumbersome outdated micrometer arrangements.
|
|
|
|
|
|
Model SM46C:
- No pit required
- 5 cm high at table top
- 800 pound running load
- Non-slip drive belt
- Cable access between turntable top and bottom
- Fiber optic interface
- Self-cleaning, fixed rollers
- Non-conductive
- 4 foot diameter
- Motor box / table separation optional and customer specified
- 1 degree position accuracy
- Electrically shielded motor box
- Maintenance free
- Indoor / outdoor
- Variable speed standard
Model SM2015C:
- 2m diameter
- 3 inches high at table top
- 1500 pound running load
- Same features as SM46C
Model FS241:
- 24" diameter rotating deck
- 100 pound (45 kg) EUT capacity
- No metal parts above motorbox
- Variable Speed
- Remote motorbox option
- Customer specified height
- Fiber optic interface
- Indoor / outdoor
Flush Mount Turntables:
- Advanced, low maintenance grounding scheme
- Exceeds site attenuation requirements
- Fiber optic interface
- All metal
- Precision - 1 degree (greater precision optional)
- Manual and remote operation
- Gear driven
- Scan or continuous rotation
- Low maintenance
- Adjustable height
- Variable speed optional
- Pit ring with self-cleaning ground plane interface
- Positioning switch located at turntable
- Full line of standard models
- Custom sizes available
- Optional deck mounted LISNs and Power Receptacles
|
|
Like a vacuum vise for glass, Powr-Grip® Positioners provide
continuous 360° rotation and four tilt angles for effortless glass positioning.
Standard Vacuum Pad:
9" [229 mm] diameter vacuum pad
Load Capacity:
150 lbs [70 kg]
Standard Operating Power:
120 volts AC, 60 hertz, 3 amps
Apply / Release Times:
3 seconds / 3 seconds (approx)
Load Movement:
Manual rotation, 360° with adjustable rotation tension
Manual tilt, 90° with locking in 4 positions between upright and flat
Adjustable Height:
3 positions at 5" [127 mm] increments
Standard Features:
Available in Floor Mount (POSF1P9AC) and Bench Mount (POSB1P9AC) models.
(Note: Floor model should be counterbalanced or permanently fastened to the floor for proper operation.)
Foot-controlled vacuum release valve
Vacuum line filter
Vacuum gauge
Twist-lock electrical plug
Blow-off for quick release
|
|
Rotary Tables are a convenient, accurate method of positioning or rotating a payload. These tables use a rugged worm and gear drive design with a central rotating ball bearing. We offer four rotary tables in two designs. Each table has a different gear ratio.
Features
-a hollow spindle or clear aperture in the center
-360° scale, graduated knob,
- a readily accessible adjustment to minimize gear backlash
|
|
Zaber's TSB Series of translation stages are ball bearing linear stages with 28mm or 60mm of travel. They are compatible with our T-LA series miniature linear actuators and our NA11 stepper linear actuators and can be used in x-y stage configuration.
Vacuum compatible translation stages (TSBxx-xV) use vacuum compatible greases and epoxies and non-anodized components. These translation stages have been used successfully in vacuum applications down to 10-6 Torr.
|
|
series PX, PZ
high-resolution x- and z- axes positioning systems in compact stage-design wit top- and bottom plate offer a total motion range from 38µm up to 1500µm
Example:
PX 38 = x-axis motion 38µm
PZ 100 = z-axis motion 100µm
They are ideally suited for nm-precise positioning of optic components such as mirrors and laser diodes, for adjustment and mounting in semi-conductor technologies and electronics, for applications in measurement technologies and quality assurance as well as for microbiology.
The systems of these series are available in OEM, vacuum and low temperature configurations. Optionally they can be equipped with strain gauge, LVDT or capacitive position sensors - depending on the system configuration - to achieve very accurate repeatability.
series PU
positioning systems, which are universally mountable in a variety of installation positions with a total motion range up to 100µm
Example: PU 100 = motion 100µm;
|
|
Table moving along X-Y axes through ball linear guides.
It is particularly suitable to be included in both laser and mechanic marking or cutting systems.
This device allows to make single workings on one piece only (that can be placed at any point of working table) or on more pieces until to cover a surface of 700x700 mm.
It can be easily integrated with all Giusilaser (CO2, YAG, Fiber) or with other devices allowing the interface.
The table is equipped with one suction level and a special box for the suction of fumes according to EC rules.
The simple and essential commands are managed by an ergonomic touch screen.
|
|
|
|
|
|
Easy Auto Move – the new semiautomatic XY-table
This semi-automatic XY-table offers the ideal combination of manual handling and automatic control:
it can easily be moved by hand but also be operated motor-controlled.
The integrated controller can store any position and re-established it repeatedly by the touch of a button. This feature enables the user to make a series of reference images for the overlay function which automatically compares subsequent live images with the reference images for compliance. That way you can save a considerable portion of the time you would otherwise need for repositioning your inspection tool, e.g. in the search for defects in complex assemblies.
The XY-table also comprises a board holding plate which is held in place magnetically and allows easy positioning of many different objects.
Traverse path in both directions is 230 mm.
The XY-table is compatible with the well-known TechnoLab systems MicroInspector, EasyInspector and FlyInspector but can also be used with the products of other manufacturers.
|
|
Cross slides (XY stage):
Dovetail slides and roller bearing slides can be mounted to cross slides.
|
|
MISUMI provides more than 1 Million mechanical components for the assembly automation. We delivery components europewide in averagely 6-8 days GUARANTEED delivery from the day of purchase, stock items available from 2 days delivery.
MISUMI 24/7 Web Ordering System (WOS) represents a full-fledged e-Commerce solution, which you can use, for the first time, independently from the catalogue in paper form, to configurate MISUMI products, submit quotations and place orders.
For more information about MISUMI, WOS or for ordering a catalogue please visit: www.misumi-europe.com
MISUMI - Precisely Meeting Your Demands
|
|
You can make XY and XZ motion by joining two linear UniSlide Assemblies with adapter plates. Thousands of combinations can be made like this.
However, if you want large base and/or work plates, and your travel is relatively short, we also offer three Series (groups) of XY table packages.
Each Series comes in multiple lengths.
Options include center windows, mechanical and optical position measurement by using engrave knobs or optical or rotary encoders; optional finishes, locking screws and more.
Some of these tables are also available as motor driven units.
|
|
- Compact Piezo Stage Design, only 44 x 44 x 44 mm
- 100 x 100 x 100 µm Travel Range
- 1 nm Resolution
- Ideal for Fiber-Alignment and Photonics Packaging Applications
- Optional E-760 Controller Card Features Built-In Optical Metrology
- Closed- and Open-Loop Versions
- Flexure-Guided Precision Trajectory Control
- Fast Scanning and Settling
- Large Variety of Controllers
The P-611 NanoCube® is a versatile, multi-axis piezo stage nanopositioning system. Its 100 x 100 x 100 µm positioning and scanning range comes in an extremely compact package of only 44 x 44 x 44 mm. Equipped with a zero-stiction, zero-friction guiding system, this NanoCube® provides motion with ultra-high resolution and settling times of only a few milliseconds. Open- and closed-loop versions are offered to fit your application.
|
|
Elliot GoldTM Series XYZ flexure stage fitted with piezo actuators providing 25 µm of piezo and 2mm of manual adjustment in each of the three axes. This system can be controlled either via a simple piezo controller or an Elliot Scientific Device Automated Alignment System (DALi2).
Ultra-stable patented* design XYZ flexure stage
Minimal arcuate displacement
XYZ Piezo adjusters
25 µm piezo adjustment travel
10 nm resolution
2mm coarse manual travel
Orthogonal alignment grooves
4.5kg load capacity
|
|
|
|
Positioning and micro-positioning tables
