|
|
- 1st and 2nd operations on same lathe W22-T4;
- complete drilling on vertical drilling center DWN-22V.
The cycle can be carried-out only when the lathe Is equipped with pallet loading system. Production capability is influenced by the lathe's ability to machine 1st and 2nd turning operations in sequence of one another on a continuous basis.
As indicated in the machining cycle below, the theoretical production capability for the machining of a 15"x7" wheel is about 33 pcs./hour.
|
|
Single-level FMS w/ RGV
One of the most popular arrangements with almost unlimited capacity. The in-line configuration allows any number of future machines, pallets and stations to be incorporated.
|
|
ROMOCUT is the first milling tool that delivers on the promise of providing clean, quiet operation. It creates no dust during the milling process (polystyrol only) thanks to the hollow tool and the integrated vacuum system (total efficiency with polystyrene). The noise level is kept to an
acceptable 80dB or lower. ROMOCUT doesn’t require any construction work
during the installation, saving you money. ROMOCUT is a NC milling tool developed by ROMER France, a leading manufacturer of portable articulated arms. Thanks to its unique design, ROMOCUT allows designers
to create new models in record times. It mills all standard soft materials used in design studios, including lab, polystyrene, resins, clay and similar; on the other hand, it can also be used for modifying and correcting existing parts right on the shop floor. ROMOCUT is easy to install and to run, and saves considerable time by letting designers modify full-scale models in real
time on site.
|
|
SPECIAL-PURPOSE MACHINE N 30 CM
Highest precision in milling of main and pin bearings for crankshafts
Application
The car industry, in particular, depends on low-cost and flexible production as well as short lead times. These are necessary preconditions not only for mass production (large series), but also small batches. The new milling centre
N 30 CM was designed especially for these high demands.
Advantages
- High productivity and flexibility
- Minimisation of machining times
- Increase in tool life
- Reduction of setup times
- Highly service and maintenance-friendly
|
|
BW 200-2-KW:
Flexible machining centre for engine crankshafts (passenger cars, up to 650 mm long).
|
|
BA 400 Horizontal Machining Center
Horizontal machining center with two or four synchronous, fluid-cooled motor spindles. Main spindle bearing in hybrid technology. Simultaneous workpiece load/unload, three NC linear axes and up to four NC rotary axes.
|
|
. MULTI-SPINDLE TECHNOLOGY
Several fixed single spindles with optimum rotation speed, torque and concentricity take care of best machining results for each operation.
The extension of this concept in ANGER process solutions is the use of multi-spindle heads for drilling patterns and multiple parts machining.
. CHIP-TO-CHIP TIME OF 0.3 SECONDS
As developers of MULTI-SPINDLE TECHNOLOGY with long-standing experience in high-speed technology, we move your workpiece during the production cycle in the machine from one fixed spindle to the next one, at best with a chip-to-chip time of only 0.3 seconds. Parts to be machined are cut up to 6 sides.
The tool remains exactly positioned in the HSK tool holder. Processing spindles can be mounted onto four sides of the processing area of the machine, which has the advantage of little wear and no chips in the tool holder.
Tool design is not restricted by machine design, an ANGER high performance machine is freely configurable and programmable.
. DYNAMIC FEED RATES
Less masses in motion reduce the wear and create highly-dynamic feed rates of up to 90m/min and 1g acceleration in the machining process. Concrete filled machine beds between 10 and 25 tons depending on the machine model assure maximum rigidity.
. NO TOOL CHANGE
As no tool change is required, secondary time is minimized. Repeated positioning- and clamping failures, as usual with several settings in several BAZ, are being minimized on
ANGER machines.
This machine design permits process capable position tolerances up to 0.01 mm, diameter tolerances in the range IT 5 and roundness up to 0.002 mm.
|
|
CNC six spindle machine for manufacturing of complex part families with intensive tooling
- 6 separately driven motor spindles with C-axis capabilities.
- Speed control for optimal cutting speeds, favorable chip breaking, and short cycle times
- 11 independently working CNC-controlled tool slides, optionally with one or two axis
- 9 additional one or two axis tool slides for manufacturing complex workpieces
- Particularly suitable for part families due to flexible setup and fast changeover
- Complete machining with driven tools in all spindle positions
- High dampening effect of hydrostatically guided Z-axis
- Backworking with synchronized pickup spindle and 3 tools
|
|
CNC double six spindle machine, counter spindle version for simultaneous front and back working
- 2 x 6 separately driven motor spindles with C-axis capabilities
- Speed control for optimal cutting speeds, favorable chip breaking, and short cycle times
- 18 independently working CNC-controlled tool slides, optionally with one or two axis
- Intensive backworking in the same cycle
- Particularly suitable for part families due to flexible setup and fast changeover
- Complete machining with driven tools in all spindle positions
- High dampening effect of hydrostatically guided Z-axis
|
|
A complete range of machines either with Stäubli or ABB robots:
- machines with 1 or 2 robots, depending on the production levels required,
- compact design, with optimum flexibility and user-friendly,
- machines with rotating table, for loading / unloading operations in parallel time, or with manual loading area,
- with or without security roll-up door in operating area.
Indicative dimensions of the parts that can be cut : 2500 x 1100 x 500 mm maximum.
Specificities that make the difference:
- Compact machines (peripheral equipments integrated), autonomous and easy to set up.
- User-friendly (2 levels of use : production and intervention : menus developed for the specific needs of the application).
- With evacuation system of the chips and scraps.
- With blowing system of the parts cut (cancel the electrostatism).
- Remote maintenance and remote supervision of the machines.
- Possibility to connect the machines to a local workshop network.
|
|
A complete range of machines either with Stäubli or ABB robots.
machines with 1 or 2 robots, depending on the production levels required,
compact design, with optimum flexibility and user-friendly,
machines with rotating table, for loading / unloading operations in parallel time, or with manual loading area,
with or without security roll-up door in operating area.
Indicative dimensions of the parts that can be cut : 2500 x 1100 x 500 mm maximum.
Specificities that make the difference
Compact machines (peripheral equipments integrated), autonomous and easy to set up.
User-friendly (2 levels of use : production and intervention : menus developed for the specific needs of the application).
With evacuation system of the chips and scraps.
With blowing system of the parts cut (cancel the electrostatism).
Remote maintenance and remote supervision of the machines.
Possibility to connect the machines to a local workshop network.
|
|
EXTRA LARGE WORK ENVELOPE, UP TO 6 METERS(20 FT) VERTICAL AND 20 METERS(65-1/2 FT) HORIZONTAL TRAVEL.
VERSATILE RAM + SPINDLE HEADSTOCK DESIGN ALLOWS EXTENDED REACH INTO DEEP PART CAVITIES.
ULTRA-HEAVY MILLING AND BORING CAPACITY USING THE 100Kw(134 hp), 3-RANGE GEARED HEADSTOCK GENERATING SPINDLE TORQUE OF 15,000 N-m(11,000 ft-lbs).
ELECTRO-HYDRAULIC HEADSTOCK AND RAM DROOP COMPENSATION SYSTEMS.(SIMILAR TO MX 7 RAM)
HYDROSTATIC WAY SYSTEM FOR HORIZONTAL TRAVEL ALLOWS ACCURATE POSITIONING/REPEATIBILITY OF THE MASSIVE COLUMN STRUCTURE.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we rout it !
Further routers, like End milling machines, Single spindle copy routers, Multi spindle copy routers and Template free copy routers cover our product range.
|
|
| ... products without technical information |
| |
|
|
Milling machines, Machining centers: Universal & Multi spindle 
