|
|
Cutting with the speed of light, Laser cutting has a very special place in the BWCutters portfolio offering a specialities less suited to blade cutting such as acrylics and is particularly popular with sailmakers and kitemakers who need to seal the edge of their material as they cut.
BW Cutters have been manufacturing laser cutting for the technical textile industry for over twenty years and still have customers using their original cutters we are specifically a flatbed cutting machine manufacturer and it was BW Cutters that introduced laser cutting into this industry sector.
Our customers are worldwide from USA to China and are used for example by the largest sail making companies in the world, such as Elvstrom-Sobstad and Hoods
One important factor in any Laser Cutting machine is the Laser unit itself the quality and reliability of this is critical and we have a long relationship with our supplier Synrad out of Seatle who offer a very efficient unit within a lighter mass than alternative manufacturers. This enables us to carry the unit on the gantry with no reduction in speed and movement. The fact that we carry the unit horizontally on the gantry then allows us to deliver the cutting beam to the material in the best and most efficient way, basically the distance between the unit and cutting point is only the height of the gantry meaning that the cutting beam length is as short as possible.
Another very important feature with our laser is that we deliver dc voltage directly to the laser head not through an expensive RF cable which would lead to significant power loss and such a long RF cable would can be prone to wear and tear damage. |
|
The SUPER SILENT 1250 S band-knife machine creates optimal cutting results without operator fatigue
The SUPER SILENT 1250 S runs absolutely vibration free and delivers very good cutting quality. Adjustable band-knife speed by frequency control allows optimal adaption of the band knife speed to the materials and ply height being cut , while operating at a very low noise level.
The quality and quantity of cutting with a band-knife machine depends directly upon the operator stress level.
The SUPER SILENT 1250 S band-knife machine provides optimal and ergonomic working conditions for operators and thus allows maximum production output.
Here are some of its highlights:
- Vibration free
- Silent operation through optimal noise reduction
- Outstanding cutting performance through constant knife sharpness by precision
sharpening device
- Excellent cutting quality
- Highest reliability
- Easy handling of heavy ply stacks through air cushion table |
|
SCV System, in collaboration with other major enterprises distributes, produces and adapts specific machinery for the moulding of glass.
We supply the machinery as well as guaranteeing the installation, testing, assistance and maintenance of the components, comprising cutting tables, doubleglass lines, vertical and horizontal washing machines, sand blasting machines and others. |
|
| The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (100-400 cm). It rotates the pipe on it’s roller bed with a three jaw chuck while simultaneously moving a cutting torch back and forth along the pipe’s axis. |
|
| Programmable Gantry System provides coordinated motion in two axis. Can be easily programmed to repeat any contour or pattern for either cutting or welding applications. |
|
SteelTailor B -- the bench type CNC cutting mahcine, is ideal for plasma cutting of medium and thin plates.
|
|
V806M Beam coping system
The V806M is a beam coping system with a universal six axis industrial robot especially designed for cutting I-beams, H-beams, channels, angles, rectangular tubes and flat-bars. The system is capable of cutting in both flanges (from left and right side) and the web (from above) of beams and can also carry out web and flange bevels.
For the automatic positioning of the profiles feeder rolls are fitted. The V806M is equipped with a coping robot with a oxygen cutting unit.
The V806M coping system can be used as a single machine or can be integrated into a line and be coupled with drilling system making it a very flexible machine.
|
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
American Maplan's Out of Line Vertical, In Line Vertical , High Performance and Calandrette® film and sheet systems offer a full range of extrusion solutions
High degree of versatility to suit every line design requirement
Inline systems can be combined with all automatic thermoformers currently available on the market
Our extruders are designed to accommodate a large processing range at high output rates with low energy consumption
Melt degassing for excellent film quality
|
|
The Sirius 1000 is a high performance high-ply textile cutter with automatic material feed. Owing to the stable knife action and high vacuum power, it is possible to accurately cut coated materials and fleece, cotton, wool, insulating materials and other voluminous materials up to 100 mm in height, compressed under vacuum, at effective cutting speed of up to 20 m per minute.
To ensure excellent cutting quality of even very high stacks , the cutter is characterised by a specially designed vacuum flow, which ensures that the cutting material is subjected to an evenly distributed pressure during compression and therefore there is no displacement within the multilayer pile. To achieve greater efficiency when cutting soft materials, the output of the vacuum pump was also raised so that voluminous materials are compressed down to 30% of their uncompressed height. This means that at the same cutting height more layers can be cut.
The adaptive knife guide in the Z axis (tangential axis)ensures that deflections of the knife caused by the cutting forces during the cutting process are automatically compensated. In this way, a very high degree of cutting accuracy with soft materials ,from the top to the bottom layer is achieved.
These characteristics, combined with the reinforcement of the lateral knife guide, the stable guidance of the knife back and the reinforced pressing plate guide, allow to cut compressed layers of voluminous materials accurately up to a height of 100 mm at effective speeds of up to 20 m per minute.
For the automotive version of the cutter , the drilling machine was reinforced to enable precision bores up to 25 mm to be performed rapidly. |
|
The High Ply Fabric Cutter TURBOCUT S 2501 CV from assyst-bullmer represents high standards of design and manufacturing in Fabric Cutter-Technology. Like all assyst/bullmer High-Ply Cutters, it cuts fabrics and similar materials with a reciprocating blade which is mounted on an X-Y-drive and tangentially controlled to follow the contour shapes. The result are precisely cut patterns at enormous speed. Affordable without compromising quality was the basic idea for this new development. Turbocut S2501 can be used to cut a wide variety of woven and non-woven textile, textile-like and similar materials , up to 2,5 cm (1") ply height under vacuum compression of the material stack
NEW features:
New, extremely light Turbo beam
Very light , yet sturdy cutting head based on skeleton frame
New high frequency knife quide
The result:
Highest speeds up to 90 m/min
Acceleration up to 1,3 g
Knife frequency up to 7500 rpm
Enormously increased conture speed
Quiet, vibration-free cutting head
Maximum reliability
Accurate cutting contours
Constant accuracy
Low Cost of Ownership
No spare knife drive necessary
The highlights:
Integrated high performance vacuum turbine with only 15 KW
Automatic bristle cleaning during bitefeed
Sharpening device with diamond sharpening wheel for ultimate knife sharpness
Free accessible knife for simple and fast knife change
Additional knife guide for stabilization of knife during sharpening for
smooth cutting edge.
Controller with CNC completely encased in dust protected steel cabinet
Control Software with real time graphic, error menu, operator guide, data management and remote-maintenance |
|
The new assyst/bullmer fabric cutters PROCUT L 5001 for 5 cm and PROCUT XL 7501 for 7,5 cm compressed ply height represent a world-class product in regard to performance, accuracy and reliability. PROCUT L 5001 and PROCUT XL 7501 have a cutting window length of approx. 1.800 mm (optional: 2.500 mm). The Cutters are equipped with linear modules for the X- and Y-axis.
PROCUT L 5001 LV and PROCUT XL 7501 LV (”Long version”) models can be built with bristle conveyors in any desired length up to 12 m , especially in demand in the automotive and furniture industry. The LV-versions differentiate further from the standard types by a cutting bridge with side parts, a roller guide on both sides in x-direction and rack and pinion drive.
Depending on application and material to be cut they achieve the following performance parameters:
* Maximum speed up to 90 m/min.
* Acceleration of up to 1,0 g
* Effective cutting speed of up to 20 m/min. |
|
| The MultiCam EZ Knife system was developed to serve markets that require mechanized knife cutting, creasing, and perforation operations. The EZ Knife system supports tangential drag, oscillating and ultrasonic cutting techniques. Choose from many blade types including rotary, spear point, utility, and more. EZ Knife can be purchased as a stand-alone CNC machine based on the MultiCam 1000 Series and 3000 Series motion platforms and can also be added as an option to the 1000, 3000 Router and Plasma Series. |
|
APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films%u2026etc.
FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically.
OPTIONAL PARTS:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
MAIN TECHNICAL PARAMETERS:
Valid Width:1000mm/1300mm/1600mm
Max. diameter material:270mm (300 mm)
Max. cutting speed:35cuts/min
Inside diameter of paper core:32-76.2mm
Main motor:5 HP
Blade drive motor(Servo motor):3 HP x 6 P
Blade diameter:150-350 mm
Blade speed:360-1800 rpm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation. |
|
Koike Aronson offers one of the industry's most extensive lines of cutting machines in both Gantry and Cantilever styles.
Choose from oxyfuel, plasma, or laser systems for optimum performance, then match the cutter with one of our CNC controls for added precision and versatility.
|
|
- Twin torch cutting attachment for bevel and strip cutting
- Beam splitting attachment
- Rollers for straight line cuts using bright angle guide
- Track for straight cuts
With optional supply voltages of 110V and 42V and with double insulation as standard, the Quicky® offers a high standard of safety. The speed control is integrated ergonomically into the handle for ease of use.
Simple torch adjustment, both laterally and vertically and a cutting torch which comes as standard with nozzles for up to 100 mm thick Mild Steel cutting, the Quicky® is laid out for optimum performance. A wide range of options ensure flexible use for every application. |
|
These versatile GO-FER III Kits make straight line welding and cutting more efficient and economical. Produce machine quality welds and cuts in any plane or position with a portable drive on magnetic track.
Kits are available in specific configurations and are an affordable solution for welding, plasma or oxy-fuel cutting. The kits come complete with a drive, torch holder, 8 foot rail and on/off magnet assemblies. Additional sections of rail, a radius cutting attachment and vacuum cups for non-ferrous applications are also available. |
|
Koike Aronson offers a wide variety of portable equipment to handle both straight line and circle cutting. They all have unique features that are sure to suite your needs.
The Handy Auto series machines provide endless possibilities with the unique ability to make clean, accurate cuts by motorizing the hand cutting method. The cuts made by the Handy Auto are so clean that secondary preparation is not required for most applications. This saves you time and the cost of grinding later.
IK series
These two magnetic template-cutting machines offer many options to produce high quality cutting. |
|
| The portable rescue outfit is the perfect equipment for fire departments, search and rescue, military use and other rescue applications. It is light and portable, safe and easy to use. |
|
Manual shape cutting
The P is a lightweight manual ultrasonic device allowing easy shape cutting on any type of synthetic textiles and nonwovens. This handy cutter performs very clean cuts, eliminates frays and creates consistent and clean edges. |
|
HIGH PERFORMANCE ULTRA-SONIC CUTTER :
- Oscillating Frequency : 39.5KHz, Max. Output Power : 30W
- Intricate and accurate cutting with a light touch.
- Machine attachment type is also available. |
|
| 2-axis machine which you can program to run any contour or pattern for both welding and cutting applications. |
|
The SM.320.TA version with its conveyor belt, enables continuous work by loading the material to be processed and unloading the processed material from the worktop with no need for the operator to step in.
As the other machines in the FULLCUT range, the SM.320.TA can be equipped with up to six tools at the same time: laser, ultrasonic, a set of three wheel blade holders , a marker and a milling cutter. This makes it possible to switch from one material to another simply by selecting the tool to be used via the software. This makes the list of materials that can be cut on this type of machine endless.
A strong point of the machine is the possibility of customizing it according to customer’s needs. This versatility is ensured since both the machines and the software are manufactured and designed entirely by SMRE. This enables customised applications to be developed very rapidly for each customer. |
|
|
|
Other cutting machines
