|
|
|
|
|
|
Use
The "ELE" portable fan has been studied to solve the problem of gas exhaust extraction from vehicles during the motor test operations in closed room without ant extraction systems fixed on the wall or on the ceiling.
The range includes versions and accessories studied for a wide and easy utilisation in workshop for motorcycles, cars, vans and heavy means and it's enough to connect electrically the portable cleaner placing the expulsion piping outward to guarantee an environment without any bad emissions.
The reduced weight and dimensions will help to put the portable fan outside the working places.
Technical features
The system allows the gases extraction by placing near to the exhaust pipe the suitable intake fixed manually at the right height on a pole thanks to a sliding mechanical block device.
The range includes also positioning device and accessories to be utilized on double exhaust pipes or in particular position.
The gas extraction is made by a suitable aspiration group that guarantees the fumes extraction through a hosing heat resistant up to 125° C supplied with the system. The control panel and the thermal protection group drive an electrical motor 230 V - single phase (ELE facile on request) with 6 m anti-flame cable and standard single phase socket.
|
|
|
|
|
|
Car-/Truck-Single systems
Single (double) systems are basicly supplied with the following parts:
- ventilator,
- wall bracket
- motorprotection switch
- exhaust hose (2 hoses)
- exhaust nozzle (2 nozzles)
- exhaust hose support (2 exhaust hose supports)
Description:
Ventilator: 1,000 m3/h, Motor: 0.55 kW · 3 x 400 V · 50 Hz
Car - Single system with exhaust hose, Ø 75 mm, length 5.0 m, exhaust nozzle Ø 75 mm or
exhaust hose, Ø 100 mm, length 5.0 m, exhaust nozzle Ø 100 mm or
exhaust hose, Ø 75 mm, length 7.5 m, exhaust nozzle Ø 75 mm or
exhaust hose, Ø 100 mm, length 7.5 m, exhaust nozzle Ø 100 mm
Ventilator: 2,000 m3/h, Motor: 0.75 kW · 3 x 400 V · 50 Hz
Truck - Single system with exhaust hose, Ø 150 mm, length 5.0 m, exhaust nozzle Ø 150 mm or exhaust hose, Ø 150 mm, length 7.5 m, exhaust nozzle Ø 150 mm
Description
Ventilator: 2,000 m3/h, Motor: 0.75 kW · 3 x 400 V · 50 Hz
Car - Double system with 2 exhaust hoses, Ø 75 mm, length 5.0 m or 7.5 m, 2 exhaust nozzles Ø 75 mm or
2 exhaust hoses, Ø 100 mm, length 5.0 m or 7.5 m, 2 exhaust nozzles Ø 100 mm or
2 exhaust hoses, Ø 150 mm, length 5.0 m or 7.5 m, 2 exhaust nozzles Ø 150 mm
|
|
|
The SER is designed to retract the hose with the assistant of a spring operated retraction device. We recommend this reel for general service shop applications when you can easily reach the hose.
|
|
Vehicle Work Area Exhaust Removal Solutions
The Airflow Systems line of vehicle exhaust removal products are designed to bring clean air to vehicle service facilities. If not controlled, vehicle exhaust can contribute to worker illness, increase facility maintenance expense, and harm the sensitive electronics of diagnostic and servicing equipment. Vehicle exhaust removal systems from Airflow Systems, Inc.® are a versatile, easy-to-use technology that provides for the collection and removal of potentially harmful vehicle exhaust. From exhaust hose reels to a hose saddle, exhaust removal systems from Airflow will quickly contribute to improved service bay cleanliness and total facility productivity.
|
|
Technical specifications
No floor space required.
Complete suppression of exhaust gas in the premises.
Operator protection (decree from April 1, 1964 n°206 art 19).
Energy saving thanks to catchment at the source compared to a general ventilation system.
Simple installation.
|
|
|
|
|
|
Modular extraction hood: banish welding fumes to the past
Euromate, a specialist in innovative solutions for the extraction of welding fumes, has developed a modular extraction hood. This modular concept provides the best answer to all your welding fumes, cutting and gouging issues, where source extraction is impossible.
Often the extraction of welding fumes in hoods takes place in the middle, not always being very efficient. Some of the fumes will flow out at the sides of the hood – not being extracted at all. Therefore Euromate developed a side extraction framework, optimising the airflow considerably and thus improving the extraction’s efficiency.
As extraction takes place from the sides instead of the middle, more fumes are being extracted from the working area – creating a healthier working environment. Thanks to the well thought-out deflector plate, the airflow is controllable and minimizes sparks to reach the air-treatment system, decreasing the risk of fire substantially.
As the extraction hood of Euromate comes in modular parts, the extraction hood can easily be put together on the spot. It’s not a do-it-yourself kit, but it is not far of! The extraction hood can be suspended from the ceiling or used as a freestanding unit on aluminium legs – according to the environment you are working in. The legs are optional, available in 2, 2.5 and 3 meters and can be cut to requested lengths. The modular design comes as standard with eye bolts. Euromate offers a modular design from 1.5 m² up to 8 m². Expandable with various accessories, such as a lighting fixture incl. fluorescent light, aluminium legs and welding strips.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
*CONTINUOUS MONITORING SYSTEM OF AIR VELOCITY
Located in the natural vision field of the user.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
Collecting at their point of emission, the smoke and vapors (corrosive or not) emitted at the time of operations in:
Workshops: cleaning of parts to solvents, steeping with the acids, scouring, joining, welding...
Laboratories: chemical handling
ASSETS:
Articulated system: adjustable in height and directional in all directions.
Available on stock.
The connection of the hoods to a plastic centrifugal fan,
type ECN, dedicated to the corrosive vapor extraction, constitutes an effective and durable anti-corrosion unit
ADVANTAGES:
Circular or rectangular hoods
Removable transparent flexible thin straps of containment
All scopes of application: Laboratories, Workshops, any industry
|
|
Isles AirCleanTM workstations are engineered and manufactured with attractive contemporary styling and the highest quality construction. Recommended for any Class 100 requirement that does not produce by-products that can contaminate the worker or production area. Available as either vertical or horizontal flow models. These specialized workstations are constructed with cold rolled steel for durability and finished with powder coating for long lasting performance. Standard worksurfaces include cleanroom seal.
|
|
|
The F73A and F73B fume extraction systems provide industrial electronic control of welding and metalworking fumes in work areas. The F73A and F73B clean the air of industrial smoke and oil mists. Either source capture techniques or ambient air cleaning can be used to provide healthier working conditions.
|
|
The intelligent extraction hood!
REVEN® temperature and fume sensors enable perfect control of the exhaust air flow of extraction hoods. In normal large-scale kitchens, one, two or a maximum of three speeds are available to adjust the extraction system to the heat and fume concentration in the kitchen. An automatic control with sensors provides for far more efficient ventilation.
|
|
|
|
|
|
SCF-F plug & play filter units; optimise your extraction hood and multiple arm system.
Euromate offers a variety of filter units - mobile, stationary and central filter units - for any air volume you need to cover. All units are developed to filter welding fumes and dust very effectively. The latest filter units are the self-cleaning central filters with an integration extraction fan (SCF-F 2 with two filter cartridges and SCF-F 4 with four filter cartridges); developed in accordance with the latest international electrical standards.
The SCF-F series have been developed to meet the demand for plug & play filter units to support small and medium-sized extraction hoods and multiple arm systems with up to 7 extraction arms.
The main feature of the SCF-F is the outstanding cleaning technology of the filter cartridges. The self-cleaning mechanism ensures that the filter stays efficient and has a longer lifespan.
Besides that the SCF-F 4 features a programmable intelligent control with a frequency inverter as standard. The unit will adapt to specific needs and controls the air volume automatically; the result: a reliable and constant filter performance.
The frequency inverter has a very positive effect on the lifespan of the filter cartridges. In addition substantial energy savings up to 40% can be achieved; keeping the overall operating costs extremely low.
BENEFITS: plug & play, reliable and constant filter performance, low operating costs, efficient airflow control, energy savings up to 40% and solid construction.
|
|
AirClean Systems AC600 Series Ductless Workstations
Our most economical workstation for operator and environment protection. Safely remove toxic vapors, gases, fumes and particulate.
Ideal for:
General chemistry involving small volumes of common chemicals
Tissue staining and processing; e.g. histopathology, cytology
Gluing operations
Solvent cleaning of electronic parts
Soldering applications
School demonstration workstations
Forensic applications - containment of fingerprint powders and chemicals such as ninhydrin and cyanoacrylate
Animal necropsy
Standard Features:
AirSafe™ automatic safety controller
Integral base with deep spill lip
No ducting required
Minimal installation - plugs directly into a standard 110V or 220V electrical outlet Extremely quiet operation < 49dB
All thermoplastic construction with application specific sash, base and enclosure material
Available in “low-profile” or tall version 32” or 48” widths with nominal 24” depth
UL, CSA and CE listed
|
|
The fume cabinet, fume hood and extraction chamber all in one.
Ideal where complete freedom is required to work on several processes at once and where ease of visibilty is essential. Where fumes spread rapidly, for example in draughty working conditions, the Cleancab™ can enclose the source, enabling fumes to be captured before they contaminate the workplace.
Cleancab™ fume hoods: -
Have a shatterproof clear polycarbonate hood
Utilise a chemically resistant base
Include an integral airflow valve
Are heat resistant
Are ESD safe
Are easily cleaned
|
|
Independent power
These stand-alone industrial air cleaners with cleanable electrostatic filters can extract welding fumes from the local atmosphere even when extraction close to the source is not possible. The HFE 25 has a capacity of 2,500 m³/h and the HFE 50 up to 5,000 m³/h. Naturally, the HFE 25 and HFE 50 also take out other pollutants such as fine dust.
Also suitable to extract oil mists after installing the appropriate pre and final filters and oil drainer.
|
|
|
|
|
|
The “original” Smokeeter, pronounced “Smoke Eater,” is United Air Specialists' most well-known commercial indoor air cleaner. Most commonly used in bars, restaurants, bowling alleys, office buildings and other public facilities, the Smokeeter is the best electrostatic precipitator in the industry. These units can be installed on the ceiling or mounted on the wall, as well as concealed above the ceiling.
Features & Benefits
Ionizer*—Electrostatically charges particles.
Collection Cell*—Captures charged contaminants to rid them from your business’ environment.
Pre-filter—Optional layered aluminum mesh screens capture large airborne particles as they enter the unit.
After-filter—Optional activated carbon after-filter helps control odors.
Indicator Light—Illuminates when unit is working properly and automatically shuts off when components need routine servicing.
Multi-Speed Control Switch—Provides variable blower speed adjustments to control noise levels during peak and off-peak business hours.
|
|
|
|
|
|
Inkjet Fume Extractor and Filtration System
These units are designed to capture and filter harmful solvent vapour from inkjet printers then return clean air to the workplace without the need for an expensive and disruptive vent to atmosphere ducting system.
Inkjet printers are used widely throughout manufacturing and packaging industries to apply information, identification codes and best before dates etc. onto products made from various materials such as glass, card and metal.
Wide format inkjet printers are also used to produce large images, displays, graphics and signs in many print and design industries.
Various organic solvents are used as carriers for the ink pigment such as Methyl Ethyl Ketone (M.E.K.) which can cause eye irritation and CNS depression, it is also a skin irritant and can be harmful by ingestion or inhalation.
Purex Solution
The Purex Inkjet extraction and purification system effectively captures fumes from both the print head and the vents in the printer, therefore protecting personnel from inhaling the solvent fumes.
Fumes are then drawn through a Purex Solvent-Lock filter which utilises a specialised blend of filter media to adsorb and oxidise the solvent vapour safely before clean air is returned to the workplace.
Features and Benefits:
• Protects personnel.
• Ensures compliance with health and safety legislation.
• Prevents medical conditions such as fatigue, headaches, nausea.
• Reduces absenteeism.
• Removes solvent odours.
• Completely mobile.
• Compact and quiet in operation.
• Easily maintained.
• Long filter life.
|
|
|
|
|
|
The Fume-Cube is designed to protect 1 or 2 personnel from inhaling hazardous dust and fumes which are generated during a wide range of applications.
The FumeBuster fume extraction and filtration system is specifically designed to protect up to 3 personnel from inhaling hazardous fumes and dust generated by a wide range of manual processes. These include - tinning and potting, gluing, soldering, chemical treatments and dust applications. A range of easy to install kits are available to make the FumeBuster one of the most flexible extraction systems on the market.
These units are lightweight and easy to carry and include long life unburstable filters, which can be changed in less than 60 seconds.
-Vari-Colour warning system
-Automatic flow control
-Speed control
-Compact dimension
-Quiet operation
-Excellent filter life
-Robust construction
-Arm extraction accessories
Exceptionally high air flow, low capital and running costs coupled with simple installation make they are ideal extraction solutions. Extremely robust, they are equally suited to the workshop and the production line where to be used to purify fumes that are generated during:
-Tinning & Potting
-Gluing & Chemical Treatments
-Soldering Assembly
-Rework & Repair
-Printing & Marking
-Dust Applications
In addition to the safe extraction and filtration of dust and fumes, Purex systems offer real cost savings. Unlike external venting systems,Purex machines recirculate air from the workplace so that heating & air conditioning costs are reduced.
|
|
TEKA offers a wide range of suction units for more than one working place. The picture shows a cartridge filter unit for welding applications (it is suitable for the treatment of steel, galvanized steel, aluminium etc.). We offer these units in various versions - with HEPA filter or with filter cartridge (with manual or automatic dedusting). The units for welding applications (mobile or for wall-mounting) are available with one or two suction arms. For more than two working places we offer our centralized suction units.
For soldering, laser and/or electronics applications TEKA offers units for up to 4 working places. These units are equipped with several filter steps (prefilter, HEPA filter and activated carbon filter).
CAREMASTER, CLEANMASTER, STRONGMASTER, CARTMASTER, AIRFILTER Mini, LMD
|
|
|
|
|
|
|
The FumeFighter® fume extraction air cleaners are designed to capture and clean fumes and gases generated from soldering, adhesives, stained glass work and many other indoor applications. Exceptionally high quality air cleaner package couples the largest filters available in the industry with a compact, vibration free blower package. Filters include a true 99.97% HEPA filter with over 82 sq. ft of media and a 15 lb. sorbent media filter to insure high efficiency and longevity. The HEPA filter alone in this unit is as large as many of the competitors whole air cleaner! The gas filter cartridge is also 5 times larger than the average competitor's gas cartridge. It has been shown that a doubling of media area results in filter life approximately 4 times longer for a comparable airflow. The blower package is a German built motorized impeller using a very high efficiency external rotor motor that delivers more airflow with less energy. The FumeFighter comes standard with an infinitely variable speed control that provides maximum versatility to the user while consuming less than 2 amps at 115V. All of this in a compact unit designed to fit under a standard bench with a very cost competitive price tag and lower operating costs in the long run.
|
|
Hazardous materials in the form of solvents, gases and vapours are often unavoidable in production processes. According to national regulations of air purification at the workplace they have to be removed from the air. Extraction devices of the ULT AG are particularly designed for these tasks and thus, harm to employees, products and machines is safely prevented.
The recirculation ventilation helps to reduce energy costs.
|
|
The solvent smokes generated by inkjet plotters in the workplace can be unpleasant and harmful for personnel.
The ACD series of air extraction and filtration units of ULT AG offers a wide range of possibilities to capture the bad smells and solvents coming out from inkjet plotters. All units are equipped with special impregnated activated carbon.
The highly effective and silent units offer an air volume from 80 - 1.000 m³/.
The cleaned air can be led back to the working environment thus saving energy costs.
|
|
The annular sensor (Pouyès ring) is intended to ensure the fine or vapor collecting (dust) when traditional materials, (such as the hinged jibs of aspiration, exhausting hoods...), appear unsuited or inoperative.
Adapted to handling such as: the transfer, filling of barrels, mixer and crusher supply, the loading of engines, bagging, conditioning, the emptying of hoppers, sifting, weighing, the mixture...
ASSETS:
The Pouyés ring includes/understands a peripheral slit, forming a screen of air between the polluting zone and the operator, surrounds with more close the work station. The volatile particles are then aspired towards a system of recovery (ventilator with filter, dust extractor,...)
CHARACTERISTICS:
Realization to measure
Nettoyable and dismountable without tools
Preserve the air of any contamination
Helps with handling (rests bag, station of weighing associated...)
|
|
TEKA offers various suction benches.
The welding benches for example are primarily used in welding schools. They guarantee a highly flexible use.
The TEKA grinding benches feature rear and bottom suction and have optional lamella siding which allow ergonomical processing of oversized metals. Because of the renunciation of metal sides even long and bulky items can be processed ergonomically.
We offer the standard benches in various dimensions. Individual solutions are available on request. We kindly ask you to contact us for the choice of the right fan or suction unit.
|
|
Hydrotron DHYD Series: Wet Type Dust Collector / Downdraft Table
The Filter 1 Hydrotron Downdraft Table is a self-contained workstation with its own water dust collection system, excellent for "cell manufacturing." It features easy installation and comes ready to run. The workstation is available with a single work surface or with two work surfaces, one on each side.
The Hydrotron gets the dust immediately wetted, reducing the risk of fire in ductwork and meets OSHA and NFPA regulations for dust collectors located inside the building. The standard unit includes a fiberglass grated work surface, a Regain Air Curtain in front to prevent dust from escaping the work zone, and a clear inspection door.
Options
- Regain Air System
- Stainless Steel Construction
- Overflow/Low Water Cut-off Switches
- Explosion Proof Motors
- HEPA Safety Filters With Alarms
|
|
AirClean Systems Polypropylene Horizontal Clean Benches
AirClean Systems Horizontal Laminar Flow Clean Benches are constructed from all-white, structural polypropylene. This provides a seamless design and exceptional Class 100 laminar flow air in a horizontal direction. Uniform air exits from the rear of the hood where it is filtered and then flows forward to the face of the hood. Built-in fluorescent lighting is provided to illuminate the work surface. Units are available in standard 52-inch and 102-inch widths while custom widths are available.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
|
|
|
|
NuAire’s AireGard NU-201 Horizontal Laminar Airflow Workstations are specially designed to provide the ideal particle-free, bacteria-free, clean-air environment needed for laboratory work and pharmaceutical procedures. These workstations create true laminar air flow and uniform horizontal velocities throughout the entire work-zone, achieving minimal air turbulence by making the work area enclosure zone an extension of the HEPA filters actual flow area. The clean filtered, uniform velocity air is then allowed to flow outward in streamlines, eliminating “backwash”.
The AireGard NU-201 is designed with highly reliable control systems, providing extraordinary attenuation of sound and vibration. The Controls, Pre-filters and HEPA filters are conveniently accessible from the front of the unit allowing for easy adjustments. The top and side panels surrounding the work area are constructed of clear polycarbonate, preventing a “trapped” feeling and allow viewing of the workstation by other personnel. Contact NuAire for your laboratory needs.
|
|
AirMax™ Polypropylene Total Exhaust Fume Hood from AirClean Systems
AirClean® Systems AirMax™ total exhaust polypropylene fume hoods are manufactured from all-white, structural polypropylene. Polypropylene offers excellent chemical resistance. AirMax™ has a seamless design and allows for NO MORE RUST!
Features
* Microprocessor controller - displays real-time airflow
* All Contact Surfaces are constructed of polypropylene - NO MORE RUST!
* Flame-retardant polypropylene interior - Higher temperature working range than fiberglass
* Non-hydroscopic - won’t absorb moisture
* Smoothflow™ air foils for superb airflow performance - Minimizes eddy currents found on other fume hoods
* Large volume spill basin with solid work surface
Optional wet scrubber system is suitable for water soluble gases. Each scrubber is constructed from thermoplastics that are resistant to the gases being scrubbed.
|
|
*THE USER IS PERFECTLY PROTECTED
The air released by the filter contains 100 times less pollutants than the acceptable limit values defined by the official safety authorities (this is to prevent the accumulation of the release of authorized toxics).
VERY LOW SOUND LEVEL
Only 49 dba !!
*TOTAL SAFETY OF THE OPERATOR
Hour counter associated to an alarm designed to remind the user to check every 60 working hrs. the saturation state of the filter.
VERY COMPACT SIZE AND IMPORTANT INTERNAL HEIGHT :
only 610 mm - 24 1/5 length
747 mm - 29 4/9 height.
FULLY TRANSPARENT DOOR & SIDE PANELS OFFERING A GOOD VISION
allowing for large movements within the enclosure, without opening the front door.
FULLY REMOVABLE SPILL TRAY
can be removed when needed, without dismantling the hood.
|
|
LABOPUR® fume hoods for chemicals
Following its wide experience with safety cabinets and storage of dangerous products, TRIONYX-leading manufacturer of safety cabinets-uses its entire technical knowledge to design and manufacture its fume hoods LABOPUR®.
Fume hoods LABOPUR® were approved according to the NF X 15-211 standard, by a independant laboratory, MAPE, itself approved by the COFRAQ. The COFRAQ accreditation gives evidence of the technical skills of the test laboratory by the highest european certification organisation.
|
|
|
|
Fume extractors: welding fumes, laser fumes... 
