|
|
AirClean Systems Class I Biological Safety Hood
Constructed from all white seamless polypropylene, AirClean® Systems horizontal laminar air clean benches are the ideal solution for Class I biological safety hood applications.
Features:
* UVTect™ microprocessor controller
* All polypropylene construction - NO MORE RUST!
* Seamless, smooth construction minimizes air turbulence
* Built-in fluorescent lighting
* All-white surfaces are easy to clean
* Meets ISO 5 and FS209E Class 100 clean bench standards
* 110V or 220V versions
|
|
BIGNEAT Biological Safety Cabinets meet all the requirements of European EN12469:2000 Standard.
Great features for the comfort of the operator include:
Ergonomic design
Clear well lit view of the working area
Quiet operation
Easy clean surfaces
BIGNEAT products are built using only the best available materials and using the latest manufacturing techniques to give a quality, long lasting finish - equipment that will give years of consistent and reliable service.
|
|
BIGNEAT Class I cabinets draw air past the operator and exhaust through the top of the cabinet, a negative pressure is maintained within the cabinet ensuring containment integrity.
Built to European EN12469:2000 standard
Key features
Available as ducted or recirculatory filtration models (recirc model shown)
Efficient insulation, sound levels less than 55dB(A)
Internal illumination greater than 750 Lux
State-of-the-art electronic management system with airflow indicators and audible alarms
|
|
|
ETRAF Range hoods with filtration for chemicals Large opening of work Hoods of mobile weighings Hoods Out of standard: Alarms flow weak digital Posting of the paramêtres into clear variable Speed of the ventilator Nombreux specific filters Filtres multi-applications Conforme Standard NFX15211 classifies I and II
|
|
The BA bench for extracting and prefiltering welding fumes and grinding dust comprises:
- Internal mechanical prefiltering section comprising steel filters.
- Air-tight dust collector drawers.
- Forward-blade single-intake centrifugal fan installed in depression on the side of the bench. Standard version 400V 3P 50Hz 4-poles (1,400 RPM).
|
|
The Euromate Diluter System provides for continuous dilution and filtration of the contaminated air, thereby reducing the background concentration of welding fumes. The EDS is plug & play, there is no need for ducting, and it is suitable for virtually any work situation.
Euromate Diluter System (EDS) – the smart solution:
- Plug & play solution in general filtration. Cost saving because there is no need for ducting.
- Continuous filtration of the polluted air as a result of which the background concentration of welding fumes is decreased.
- Easy to install and suitable for virtually any work situation.
- Flexibly adaptable to any work situation
|
|
|
|
|
|
AER Borne Environmental FV & FH Series Filter Media Collection systems were originally developed as a source capture system to control light mist with heavy amounts of dust generated in a cast iron machining operation. Shortly afterward the design was altered slightly to allow them to be used as general, ambient mist and dust collection systems. The immense flexibility of the system led to a variety of additional filter and blower modules creating a system that could be easily adapted to vertical or horizontal mounting configurations with filter stages and blower packages that could be easily customized to suit the specific filtration and airflow requirements of the application at hand. Additionally, should contaminants change due to process changes, filter modules can be easily added and/or existing ones altered to adapt to the changing conditions. A full line of accessories and options are available to simplify system installation.
Applications:
Machining, turning, grinding, boring, milling, forming, casting, cutting, mixing, molding, pouring, bonding, washing, welding soldering and a variety of other manufacturing and process applications. Designed for flexibility the F Series line of Filter Media collectors can be set up to control an immense variety of contaminants such as mist, dust, fume, smoke and gas/vapor as individual or more complex combined forms. The most adaptable system we offer, systems feature modular designed filter stages that are easily customizable and are available with belt drive or, direct drive, backward inclined fan packages. Systems can be configured for source capture or general ambient air cleaning.
|
|
Use
Reel for the unwinding of the squash-resistant flexible hose in different diameters depending on the vehicle type, supplied with mechanical movement only for fixed or centralized working places or sliding on the extruded duct mod. EC for the positioning near to the vehicle.
The system is designed for the localized extraction from exhaust pipe with suitable rubber or stainless steel AISI 304 intakes resistant to the temperature coming out of the motors.
Technical characteristics
The main components of the ATN series of winders are:
• galvanized steel reel fitted with a special guide to ensure that the hose is correctly wound onto the reel;
• epoxy-painted steel retainer disks fitted to either side of the reel;
• drive system: mechanical TGA hose with various diameters for different requirements;
• EV metal sheet fan (for ATNV models) with various power ratings depending on the required workload.
|
|
Reversit is an exclusive and innovative system of suction and filtration of dusts as a result of professional applications. Designed and realized with the most modern technologies available, it appear to be the only product in his kind for the special structural configuration that allows it to reach very high efficiency of filtration and to mantain them unchanged in time, observing the most strict environmental protection rules.
The modular structure that make Reversit different, starting from three basis structures, in addition to garantee reduced overall dimensions allows a full personalisation of the units depending on the pollutant and on the system demands.
All the versions are planned to be created and certified in accordance with Atex directives.
|
|
A system with a very long filter life
A key feature of the centrally-installed, self-cleaning Euromate SCS filter system is the filter surface of 150m². In addition, the SCS is equipped with the unique RoboCleanPlus® system for ultra-effective cleaning. The filter is cleaned with powerful shots of compressed air, section by section, with the residue being caught in a large dust container. This cleaning method gives the SCS a constant high extraction capacity, a low power consumption, and a longer filter life.
The RoboCleanPlus® system comes standard with a timer, a pressure sensor and integrated software. This gives you the following three options: full-automatic cleaning, cleaning triggered by a programmable time switch and immediate manual cleaning.
|
|
|
|
|
|
A system for the filtration of air in the workplace capable of eliminating oil mist and smoke caused by a variety of metal machining applications.
This solution has a very broad range of possible applications: machining centers, lathes, grinders, millings, screwings…
Thanks to the specific characteristics of the material used, the Newton line assures an extremely high filtration efficiency according to the regulating norms.
The opacimetric tests and lab analysis guarantee reliability and efficiency for the 2 versions available:
95% for the version in which the air is directly conveyed externally to the plant
99.97% for the version in which the air is recycled within the plant.
The Newton line is the ideal answer for:
For the Equipment of Oversize machine tools
5000 m3/h each unit.
Centralized Systems
Modularity is one of the main advantages of the NEWTON line, becoming the most important element for high throughput oil mist filtration systems. By combining several units together it is possible to reach considerably high air flows.
Losma is therefore able to offer tailor made solutions, ideal for centralized systems.
|
|
|
Filter systems especially made for the laser industry. Suction systems for laser jobs with i.e.metal, wood, plexiglas and gum (cutting, welding, marking etc.)
|
|
|
|
|
|
Smoke and Dust Collector for CNC Laser and Plasma Cutters
The GSP (Gold Series Package) unit is completely assembled and ready to run. The fan, cleaning system, filters and controls are factory assembled.
* 7.5 HP side mount fan rated for 2,500 CFM at 10" w.c.
* Four(4) HemiPleat® HE fire-retardant cartridges with 325 sq. ft. of media each
* Automatic, reverse pulse cleaning system for long cartridge life, prewired to Photohelic® controls.
* Modular construction allows component orientations to be changed
* Spark trap inlet to protect cartridges
* Easy to remove dust drawers
* Easy open access door to cartridges
* Tool-less cam-lock cartridge removal
* View port in sound enclosure to check fan rotation
* Sprinkler Kit
Specifications
* NEMA 4 rating on electrical enclosures
* Cleaning system requires 10 CFM clean, dry compressed air at 90 PSI
* Rugged 10 & 7 ga. construction
* Housing rated for ±25" w.c.
* Weight of collector approximately 2,800 lbs
* Media area = 1,300 sq. ft.
* Efficiency = 99.99% on 0.5 micron
* Silencer designed for 75 dBA maximum .
|
|
Use
The ducts have been studied in order to guarantee the greater use flexibility in single or centralised gas exhaust extraction systems. They are used largely in the Automotive sector considering that one aspiration collector only can serve many aspiration points connecting “TGA” flexible hoses to “CST” sliding trolleys or “ASC” reels realised to guarantee the manual or mechanical movement lengthways the aspiration axis. The system supplied pre-assembled and complete with instructions in order to simplify the different ceiling or wall mounted installations allows the connection of the duct to the centrifugal fan to facilitate the expulsion outside of the gases.
|
|
Optimum protection thanks to a smart design: Euromate downdraft table
Innovative workbench
The downdraft table is a workbench and an extraction/filtration system in one. The table removes dust and fumes from the breathing zone of the welder by drawing these through the work surface and filtering them from the air inside the workbench.
With the Euromate downdraft table your workplace will always have a powerful extraction and filtration system. The downdraft table can be placed anywhere, even inside a welding booth.
A breakthrough in extraction
Powerful extraction, maximum filter surface area, efficient cleaning, maintenance performed from the front, three-way spark arrester and simple control
|
|
Downdraft table - DraftMax
- Powerful extraction of welding smoke and grinding dust
- Three-way spark arrester enabling optimal safety
- Filter area of 52 m2
- All maintenance performed from the front
- Efficient automatic self-cleaning
- Available in four different models, geared to your specific situation.
The DraftMax tables are setting new standards for downdraft tables by offering a three-stage pre-filtration for optimal spark arrest, a maximal filter surface of 52 m2 within the available space and an extreme service-friendliness. All service and maintenance can be done from the front side. DraftMax has a very powerful extraction and the noise produced by the unit is extremely low. All features make the new PlymoVent downdraft table, DraftMax, a reliable and safe solution with a low cost of ownership.
|
|
|
An independent suction table to improve working conditions, with electronic control panel and collection at source for portable tools.
|
|
Welding and grinding benches. We have the right solution for your suction problem
Suction tables Air suction table with under-suction
Grinding benches Air suction table with under-suction and/or rear wall collector
Welding benches Stable, welded welding bench made of sectional steel
Welding and Grinding benches Honoured with the "Environmental Price of the North-Rhine/Westfalian Handicraft 2005"
|
|
The sensor of aspiration creates an effect of sweeping of the surface of work and generates a homogeneous flow of air, by protecting as well the respiratory tracts from the operator as the atmosphere of the room.
ADVANTAGES:
This system does not obstruct, but facilitates the operation of the work station as well as the breakdown service and maintenance actions.
ASSETS:
- Adapts to any type of application (realization to measure)
- Recommended by the CRAM and the INRS
- the handling of cumbersome parts allows
OPTIONS:
- Manufacture: all types of materials (stainless, plastic, sheet galva...)
- Shutter of adjustment which makes it possible to control the flow and to adapt to the treated products
|
|
|
Designed primarily for containment and capture of a variety of airborne contaminants AER Borne Environmental Systems remote downdraft benches are custom designed in a variety of configurations dependent upon the actual application. Standard units are designed for downdraft applications where a heavy duty, perforated table surface is used to draw in generated contaminants. Optional back panel with hinged sides or full enclosures are also available. Special table surfaces and mats are available for sensitive or delicate parts.
|
|
Made primarily of 12 gauge metal construction, Airex Industries’ downdraft tables are designed for industrial applications, including the removal and filtration of dust, smoke and other airborne pollutants. Hazardous materials are removed before reaching the worker-breathing zone. The built in motor/blower and reverse pulse self-cleaning filter system requires virtually no maintenance while prolonging filter life and unit efficiency. Front or side filter access, deep dust trays, optional casters for ease of movement, multiple grating options, as well as different interchangeable top sections allows the downdraft tables to be tailored, customized to your/any/very specific needs. This unit complies with environmental clean air regulations.
APPLICATIONS
- Buffing
- Grinding
- Welding
- Powder Mixing
- Sanding
- Deburring
- Soldering
- Utility table
- Spray painting
- Odour control
- Plasma cutting
|
|
Downdraft Tables
The Airflow Systems line of downdraft tables brings source capture collection efficiency to industrial applications requiring larger, open collection areas and work surfaces. The Airflow Systems downdraft table combines the work surface with the particulate collection area. The downdraft design draws contaminants away from the worker's breathing zone without hindering the worker's movement or productivity. Airflow Systems offers a selection of portable downdraft tables and stationary downdraft tables for most any type of grinding, sanding, and welding application.
|
|
|
Built from strong metal plates, designed and machined by applying the most advanced technology. This bench is a very efficient suction system for the dust produced by manual sanding and tool sanding, protecting the operator from the noxious side effects of inhaling fine dust. Its 2 m2 surface includes a sturdy system of rubber-covered supports to protect the work items during machining.
|
|
Constructive Features:
The BS bench is constructed from a series of bolted and appropriately sized panels so as to make a robust structure which can withstand uniformly distributed loads of up to 350 kg/m².
The use of gavalnised sheet metal also prevents the continuous treatment of the surfaces following use or their deterioration as normally occurs with painted benches.
The internal housing of the fan allows the overall dimensions of the BS bench to be reduced making it more compact.
The work surface and the front suction walls are extractable to allow inside inspection and enable large size parts to be placed on the bench.
Slag and heavy dust from operations are deposited inside the bench and are easily removed using the extractable collections tray at the bottom of the bench.
Th bench's ergonomic design allows it to be used in the most suitable position for carrying out the operation.
|
|
The Envirosystems Down Draft Tables are constructed of structural steel tubing with an 18 Ga. Galvanized steel plenum. The tables will attach in any AirWall MD model using am adapter kit. It replaces the normal inlet baffles. This adapter kit is included with all AirWall units that are purchased with a down draft table. The units are designed with ease of use in mind.
The process of converting the down draft table to the AirWall unit is very simple and straight forward. Generally, connecting the table to the dust collection unit requires only about 5 minutes or less to complete. We have engineered our systems to be extremely easy to use and cost efficient.
|
|
|
|
|
|
Downdraft Table / Workstation
The Filter 1 Benchtron Downdraft/Backdraft Workstation removes dust, fumes, and smoke from sanding, grinding, buffing, or welding of metals, composites, fiberglass, plastics, or wood. The Benchtron meets OSHA requirements for respirable dust down to .05MG/M3, with adjustable suction velocities of 150 to 800 FPM in the "working zone." High efficiency filters remove 99.9% of all particles 1/2 micron and larger. The unit features automatic self-cleaning, flourescent lighting, and the Regain Air, "Push/Pull" technology pioneered by Filter 1 to provide a blanket of clean air in the "breathing zone."
The standard design includes a 3 phase TEFC motor with starter and rubber vibration mount, a magnahelic guage, and sound insulation to less than 78 db. The Benchtron is available in configurations of one work surface or two, for sitting or standing.
Options
- Custom Sizes to Fit Your Application
- Carbon After Filters
- Odor Absorption Modules
- Sound Attenuators
- Work Surface Grating: Wood, Metal, Galvanized, Stainless Steel, Non-scratch Fiberglass, or Rubber
- Various Hole Size Grate
- ASHRAE or HEPA Safety Filters
- Safety Monitor Gauge and Alarm
- Spark Trap for Welding or Heavy Grinding
- Various Filter Media for Special Applications
|
|
|
Micro Air Downdraft Tables offer you the flexibility to configure a work table to exactly meet your needs, space and worker preference. Downdraft tables provide your clean air solution in a variety of applications including grinding, plasma/torch cutting, sanding, welding smoke, deburring, or fumes.
|
|
Features
- Internal Stainless filter drawer
- Connect to all Oskar's portable filtration units and fans
- Removable steel curtain to prevent flying sparks
- Built-in stainless filter drawer to collect steel chips
- Powder coated steel
|
|
The ECO trolley-mounted and ECO P wall-mounted electrostatic cleaners have been designed to extract and filter welding fumes (T version) or oil mists (N version). ECO cleaners comprise:
1. Sturdy frame made from painted sheet metal. The trolley-mounted version is fitted with appropriately-sized wheels while the wall-mounted version is supplied with a sturdy wall bracket.
2. Centrifugal electric fan with forward-blade impeller (three-phase 400V 50Hz standard version).
3. Electrical control panel (in the wall-mounted P version, it is fitted with a push button strip for switching the machine on and off).
4. Self-supporting articulated arm IBSC 160/3 for the trolley-mounted version or IBS 160/4 for the wall-mounted version (only an certain models).
|
|
|
|
|
|
High efficiency
The Filtermist range of mobile and stationery dust extraction units offer a cost effective solution to a multitude of applications in the workplace, where the efficient removal of dust and small particles is required.
Easy to operate and maintain
All models are easy to operate, simple to maintain and are easily sited. Quick access to the filter elements allows for ease of cleaning and maintenance, ensuring efficient operation and longevity of the system.
Installation options to suit all applications
Mobile units are ideal for frequently changing extraction locations within the plant. Due to their compact design they are easy to move and provide flexibility in any operation. Static systems provide extraction solutions for larger machines or manufacturing workshops, with central extraction systems up to 100,000m3h.
Economy and reliability
All models are energy efficient offering low running costs overall and all Filtermist models have an enviable reputation for both reliability and performance. This combined with the Filtermist service and spares support service, ensures you should enjoy peace of mind along with efficient operation for many years to come.
Explosion protection
Fire and explosion hazards are present in all industrial plants that generate, store or transport flammable types of dust. Filtermist offers a wide range of ATEX* rated extractors and services that will ensure a safe workplace environment with reliable protection from dust explosions.
|
|
|
|
Fume extrators: welding fumes, laser fumes... 
