{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
torsionally flexible coupling / with high torsional flexibility / for marine applications / for diesel engines
torsionally flexible coupling
VULKARDAN F

Torque: 8200 Nm - 16250 Nm
Rotational speed: 0 rpm - 2500 rpm

Areas of Application Free standing installations especially flexibly mounted installations for main propulsion, auxiliary and power generation. The VULKARDAN F is the successor of the well-established VULKARDAN E and complements the ...

See the other products
VULKAN Couplings
flexible coupling
flexible coupling
MEGIFLEX B

Torque: 10 Nm - 3125 Nm
Rotational speed: 0 rpm - 10000 rpm

Torque range 0.010 kNm – 3.125 kNm Applications For flexibly and rigidly mounted diesel main propulsion and auxiliary drives in the low power range. The MEGIFLEX B is a versatile, highly flexible coupling. With its modular ...

See the other products
VULKAN Couplings
torsionally flexible coupling / for shafts / rubber / metal
torsionally flexible coupling
RATO S

Torque: 12500 Nm - 800000 Nm
Rotational speed: 500 rpm - 2100 rpm

VULKARDAN L are designed for rigidly mounted engines and flexibly mounted engines and boast a torque range of 180.0 kNm to 360.0 kNm. The RATO-S coupling is extremely torsionally flexible rubber coupling that is able to sustain angular ...

See the other products
VULKAN Couplings
torsionally flexible coupling / for shafts / rubber / metallic
torsionally flexible coupling
RATO S +

Torque: 180000 Nm - 360000 Nm
Rotational speed: 700 rpm - 800 rpm

The RATO S, manufactured by VULKAN COUPLINGS®, is specifically designed as a torsionally adaptable rubber connection that supplies improved radial, axial and angular shaft movement of the linked machinery. Its responsive and firmly reinforced ...

See the other products
VULKAN Couplings
torsionally flexible coupling / rubber / high-speed
torsionally flexible coupling
RATO R

Torque: 12500 Nm - 270000 Nm
Rotational speed: 750 rpm - 2750 rpm

The RATO R coupling is an alternative component in the low to middle torque, complementing the RATO S. It is constructed for installations that need a high level of torsional flexibility. With a misalignment capacity, the coupling is ...

See the other products
VULKAN Couplings
flexible coupling / roller chain / light-duty / nylon
flexible coupling

Torque: 6.86 Nm - 225 Nm

Economical type couplings consisting of sprockets provided with resin chains such as polyacetal. Suitable for drive units of food machineries and light-duty conveyors.

See the other products
Tsubakimoto Chain
flexible coupling / friction / torsionally rigid / large-size
flexible coupling
NEH series

Torque: 8820 Nm - 176000 Nm

Echt-Flex Coupling Large-size series that can be used up to 176,000N・m {18,000kgf・m} Features Can be used for applications up to 176,000N・m{18,000kgf・m} Large-size, spacer type couplings Long spacer type can be manufactured upon request

See the other products
Tsubakimoto Chain
bellows coupling / stainless steel / zero-backlash
bellows coupling

Torque: 0.49 Nm - 3.92 Nm

This small, precision coupling is made of stainless steel and uses bellows construction to achieve simple, non-backlash operation

See the other products
Tsubakimoto Chain
flexible coupling / transmission / backlash-free / with elastic sleeve
flexible coupling
Jaw-Flex LN series

Torque: 60 Nm - 405 Nm

The LN Series Jaw-Flex Coupling delivers more vibration damping than our existing products by employing new material for the spider. It also provides backlash-free torque transmission and superior shock absorption at servomotor drives.

See the other products
Tsubakimoto Chain
flexible coupling / Oldham / with elastic sleeve / large
flexible coupling

Torque: 0.17 Nm - 42.5 Nm

Ultimate line of the high-quality Oldham Couplings that offer a long service life This high-precision, flexible coupling has large allowable parallel eccentricity and excellent durability.

See the other products
Tsubakimoto Chain
flexible coupling / disc / shaft / composite
flexible coupling
SGL series

Torque: 0 Nm - 5231.19 Nm

Couple your shaft to a 5HP-SP or 5HP-SP-E Series Tooth Clutch with a Flexible Coupling Assembly. There are 16 Single Flex Couplings, each designed to fit a specific 5HP-SP or 5HP-SP-E Tooth Clutch. Whatever the design style, you’ll get: ...

flexible coupling / disc / shaft / composite
flexible coupling
DBL series

Torque: 0 Nm - 5231.19 Nm

Couple your shaft to a 5HP-SP or 5HP-SP-E Series Tooth Clutch with a Flexible Coupling Assembly. There are 16 Double Flex Couplings, each designed to fit a specific 5HP-SP or 5HP-SP-E Tooth Clutch. Whatever the design style, you’ll get: ...

flexible coupling / linear / zero-backlash
flexible coupling
LC series

Linear Couplings Provide Zero Backlash Misalignment Control Between Linear Actuators Like Linear Motors, Ballscrew Actuators, Pneumatic Cylinders, And Rods Or Sensors They Drive To Prevent Binding Or Premature Wear.

disc pack coupling / torsionally rigid
disc pack coupling
ROBA®-DS servo series

Torque: 35 Nm - 24000 Nm
Rotational speed: 2100 rpm - 22500 rpm

The revolutionary ROBA-DS servo couplings are ideally used as a torque-measuring machine designed and developed by MAYR'S. Made from the combination of steel and high-grade aluminum alloys, making it compact and extremely durable. ...

flexible coupling / finned / torsionally rigid / steel
flexible coupling
ROBA®-DS series

Torque: 190 Nm - 110000 Nm
Rotational speed: 0 rpm - 13600 rpm

The ROBA-DS all-steel couplings sends torques up to the nominal torque which is backlash-free and with permanently high torsional spring rigidity. It is not sensitive to alternation loads of up to 100% of the nominal torque. It provides ...

disc pack coupling / torsionally rigid
disc pack coupling
ROBA®-DS series

Torque: 50 Nm - 10000 Nm
Rotational speed: 0 rpm - 30000 rpm

Backlash-free shaft couplings for torque transducers High precision and reliability Optimum running smoothness High speeds Robust and highly dynamic Different designs for optimum set-up

flexible coupling / for shafts / metal bellows
flexible coupling
smartflex® series

Torque: 16 Nm - 700 Nm
Rotational speed: 2500 rpm - 10000 rpm

The shaft coupling smartflex has support for many misalignment issues and a smaller mass moment of inertia. It is rigid and has a flexible body. It uses torque ratings from 16 to 700Nm.

disc pack coupling / torsionally rigid / torque
disc pack coupling
ROBA®-DSM series

Torque: 0 Nm - 200000 Nm
Rotational speed: 4300 rpm - 20000 rpm

The ROBA®-DSM torque-measuring shaft coupling, designed according to the earlier backlash-free model ROBA®-DS, has been enhanced to allow simpler monitoring of machine and system conditions. It can be used for test stand construction ...

toothed coupling / torsionally rigid / double-jointed / breaker
toothed coupling
ZAPEX ZW

Torque: 1300 Nm - 7200000 Nm

The ZAPEX ZW series of gear coupling is a series designed by Siemens. The double-jointed gear coupling of the ZAPEX ZW series serves as a soluton to the angular, parallel and axial shaft misalignment. It is optimal for use in rough operating ...

See the other products
Siemens AG - PD - Mechanical Drives
double-jointed coupling / torsionally rigid / toothed / for pumps
double-jointed coupling
ZAPEX ZN

Torque: 0 Nm - 162500 Nm

The Siemens ZN series offers ZAPEX ZN couplings are utilized to attach machine shafts and eliminate any angular / radial misalignment. They are constructed in an excellent steel framework based on a specific modular system. Furthermore, ...

See the other products
Siemens AG - PD - Mechanical Drives
torsionally rigid coupling / disc / for extruders / for printing machines
torsionally rigid coupling
ARPEX AKR series

Torque: 60 Nm - 65000 Nm

Protection with repetitive accuracy: the ARPEX torque limiters in the AKR and AKA series provide unequivocal disconnection and torque-free, complete separation of the coupled units (wear-free) at both slowly and quickly increasing torque. ...

See the other products
Siemens AG - PD - Mechanical Drives
flexible coupling / double-jointed / disc / for pumps
flexible coupling
ARPEX ARC, ARS series

Torque: 92 Nm - 1450000 Nm

The ARPEX couplings in the ARC-8 and ARC-10 is hefty and has a particular sturdy design. They have been upgraded for very high torques at simultaneously high speeds. The closed flange form and solid design of the ARPEX ARC-8 and ARC-10 ...

See the other products
Siemens AG - PD - Mechanical Drives
flexible coupling / disc / stainless steel / compact
flexible coupling
ARPEX ARF series

Torque: 120 Nm - 6100 Nm

The ARPEX ARF-6 series comprises couplings which are both compact and short, ideal for use in small spaces. It has a very short construction for use in drives with extremely small shaft spacing. This small coupling provides all the functions ...

See the other products
Siemens AG - PD - Mechanical Drives
torsionally flexible coupling
torsionally flexible coupling
Softex® series

Torque: 5.6 Nm - 90 Nm
Rotational speed: 0 rpm - 28000 rpm

Softex® Elastic drive couplings are torsionally flexible and free of maintenance. They are axially pluggable and reduce vibration. By being machined all over, Softex® standard couplings have good dynamic features and low flywheel effects. ...

flexible coupling / flange / double-jointed
flexible coupling
Starex® series

Torque: 10 Nm - 700 Nm
Rotational speed: 3100 rpm - 14000 rpm

HBE Starex® drive couplings consist of a double cardanic curved tooth gear coupling and are predominantly used in general mechanical engineering and hydraulics. The couplings are maintenance free due to their material combination plastic/steel ...

torsionally flexible coupling / flywheel
torsionally flexible coupling

Torque: 0 Nm - 791 Nm

HBE torsional couplings are suitable for the assembly on diesel-driven engines and hydraulic pumps. They are economical, dampen vibrations and can be installed by a simple plug-in.

flexible coupling / misalignment correction
flexible coupling

Torque: 0.1 Nm - 10000 Nm
Rotational speed: 1500 rpm

Wittenstein couplings are noted for their zero backlash, misalignment compensation capabilities and torsional rigidity. It is possible to acquire a coupling that can suit your individual application.

flexible coupling / jaw / shaft / aluminum
flexible coupling
SS series

Torque: 10.2 Nm - 256 Nm
Rotational speed: 250 rpm

The SS Type Stainless Steel Jaw Coupling is the stainless steel version of the industry's model for shaft coupling. It operates without metal to metal connection, and is exchangeable with the AL and L line of hubs (not for AL150). This ...

See the other products
Lovejoy
flexible shaft coupling
flexible shaft coupling
LS, CS series

Torque: 38 Nm - 20714 Nm
Rotational speed: 1500 rpm - 9200 rpm

This Jaw In-Shear 6 Pin Coupling is designed with an special 6 pin locking system operating without metal to metal connection. It uses the regulated Lovejoy L and C Type hub design and has a radially detachable spider that enables convenient ...

See the other products
Lovejoy
spriral coupling / aluminum / misalignment correction / zero-backlash
spriral coupling
ES/EC, ASB, ADB series

Rotational speed: 0 rpm - 10000 rpm

Lovejoy motion control beam style (ES/EC, ASB, ADB Series) couplings have a backlash-free design. The coupling are manufactured with aluminium and have a simple one-piece installation. The nominal torque output of ES/EC is up to 17 ...

See the other products
Lovejoy
torsionally rigid coupling / bellows / metal
torsionally rigid coupling
BW, BWLC series

Torque: 0.39 Nm - 150.04 Nm
Rotational speed: 12700, 15000 rpm

The BWC Bellows Clamp Series coupling provides a new range of coupling options with the high torsional stiffness. The higher torsional stiffness provides the benefit of accuracy and repeatability in motion control applications. The series ...

See the other products
Lovejoy
torsionally rigid coupling / disc / metal / high-torque
torsionally rigid coupling
MD series

Rotational speed: 2400 rpm - 10000 rpm

This item is especially known for the zero backslash design, but there are other important factors to be taken into account, such as the highest torsional stiffness. Note that all components of this model are made of metal (the discs ...

See the other products
Lovejoy
flexible coupling
flexible coupling
VERO-S NSR

The new VERO-S NSR mini 100 is a highly flexible and very compact design that offers an excellent solution for the optimization of the machine room as it allows pallet loading in very close proximity to the machine table. It provides ...

flexible coupling / flange / shaft / cast iron
flexible coupling
09.1013.8111

Torque: 160 Nm

The coupling N-EUPEX type A runs on complete A 110, has three components, and is undrilled. The technical features of the coupling include a material flange made of a GG-25 cast iron, an NBR material buffer, and a working temperature ...

flexible coupling / flange / transmission / plastic
flexible coupling
09.1013.8052

Torque: 19 Nm

The Coupling RUPEX type RWN is a coupling with a complete Gr. 178, has two components, and is undrilled. The technical features of the Coupling RUPEX type RWN include a material flange of GG-25 cast iron and an NBR material buffer. The ...

flexible coupling / flange / sleeve / pump
flexible coupling
09.1013.9081

Torque: 60 Nm

Material flange:cast iron (GG-25) Material buffer:NBR Product description:Torque is transmitted via elastic coupling sets, which are in evenly placed pockets around the periphery of coupling part 1 type H. The corresponding ...

flexible coupling / flange / shaft
flexible coupling
09.1035.8050

Torque: 3.51 Nm

APSOparts® offers an inexpensive, elastic coupling meant for simple applications in a limited area. The ESSEX couplings are made of puncture-proof steel and are impervious to humidity, fats and oils, and non-aromatic solvents. Able to ...

flexible coupling / plastic
flexible coupling
VAC series

The VAC suspensions are used to put the vacuum cup to the angle following the support under a pre-measured angle (0° to +/-90°). These suspensions are scaled in the middle of the vacuum cup along with the two female threads. This product ...

flexible coupling / stainless steel / safety
flexible coupling
W series

Torque: 0.59 Nm - 19 Nm
Rotational speed: 0 rpm - 10000 rpm

See the other products
SIAM RINGSPANN
torsionally rigid coupling / shaft sleeve / shaft
torsionally rigid coupling
RLK 130 series

Torque: 16 Nm - 57500 Nm

Features Centers the shaft to the hub Very high transmissible torques

See the other products
SIAM RINGSPANN
torsionally rigid coupling / shaft sleeve / shaft
torsionally rigid coupling
RLK 131 series

Torque: 16 Nm - 37700 Nm

Features Centers the shaft to the hub No axial displacement between hub and shaft during clamping procedure due to fixed ­backstop point

See the other products
SIAM RINGSPANN
torsionally rigid coupling / shaft sleeve / shaft
torsionally rigid coupling
RLK 132 series

Torque: 14 Nm - 67500 Nm

Features Centers the shaft to the hub High transmissible torques Short axial width

See the other products
SIAM RINGSPANN
torsionally rigid coupling / shaft sleeve / shaft
torsionally rigid coupling
RLK 133 series

Torque: 16 Nm - 44900 Nm

Features Centers the shaft to the hub Short axial width No axial displacement between hub and shaft during clamping procedure due to fixed backstop point

See the other products
SIAM RINGSPANN
bellows coupling / flexible / metal / metal bellows
bellows coupling
23000

Torque: 1 Nm - 600 Nm

The Metal bellows coupling is equipped with a hub that is made from aluminum and bellows made from stainless steel. This coupling requires short assembly time and an easy installation due to the presence of its radial clamping hub. If ...

flexible coupling / aluminum / maintenance-free
flexible coupling
23012

Torque: 7 Nm - 35 Nm
Rotational speed: 0 rpm - 8000 rpm

This is an aluminum beam coupling ideal for servomotors. Designed for transmission of angle-synchronous rotary movement, it features a removable clamping hub and has a natural finish. A unique slit architecture gives it excellent radial ...

flexible coupling / Oldham / aluminum
flexible coupling
23030

Torque: 1 Nm - 7 Nm
Rotational speed: 0 rpm - 8000 rpm

23030 is an oldham-type coupling with a radial clamping hub, manufactured by Norelem. The unit is made out of spacer polyacetal, while the hub is made out of aluminum. It has a short assembly time, due to the radial clamping hub. The ...

torsionally rigid coupling / disc
torsionally rigid coupling
POSIMIN

Torque: 80 Nm - 144000 Nm
Rotational speed: 1500 rpm - 13900 rpm

The TSCHAN®-Coupling POSIMIN® is a torsionally rigid steel disk coupling. It compensates for angular, radial and axial shaft misalignments within defined ranges. The coupling transmits torque without backlash through flexible steel disks ...

See the other products
RINGFEDER POWER TRANSMISSION
torsional highflex coupling
torsional highflex coupling
TNR 2424.1

Torque: 144 Nm - 9600 Nm
Rotational speed: 1200 rpm - 47500 rpm

Single-row torsional highflex TSCHAN® TNR 2424.1 for flange-shaft connection, flange connecting dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic elements without axial movement of the coupled machines.

See the other products
RINGFEDER POWER TRANSMISSION
torsional highflex coupling
torsional highflex coupling
TNR 2424.2

Torque: 144 Nm - 9600 Nm
Rotational speed: 1200 rpm - 4750 rpm

Double-row torsional highflex TSCHAN® TNR 2424.2 for flange-shaft connection, flange connecting dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic buffers without axial movement of the coupled machines.

See the other products
RINGFEDER POWER TRANSMISSION
torsional highflex coupling
torsional highflex coupling
TNR 2425.1

Torque: 144 Nm - 9600 Nm
Rotational speed: 1200 rpm - 4750 rpm

Single-row torsional highflex TSCHAN® TNR 2425.1 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic elements without axial movement of the coupled machines.

See the other products
RINGFEDER POWER TRANSMISSION
torsional highflex coupling
torsional highflex coupling
TNR 2425.2

Torque: 144 Nm - 9600 Nm
Rotational speed: 1200 rpm - 4750 rpm

Double-row torsional highflex TSCHAN® TNR 2425.2 for flange-shaft connection and taper lock bushing systems, flange dimensions acc. to SAE J 620 d. In mind of X1 easy replacement of the elastic elements without axial movement of the coupled machines.

See the other products
RINGFEDER POWER TRANSMISSION
flexible coupling / torsionally rigid / membrane / steel
flexible coupling

Torque: 1.8 daNm - 535 daNm
Rotational speed: 1000 rpm - 3000 rpm

To complete the range of production line UNIMEC also produces blade couplings which has high stiffness against twisting & bending which is extremely rigid against bending of blades in both the direction of its circular motion of operation ...

roller chain coupling / flexible
roller chain coupling
LRC series

Torque: 162 Nm - 18040 Nm
Rotational speed: 50 rpm - 5000 rpm

The Type LRC is a roller chain coupling which works with low to medium speeds. With its cover off, the coupling can operate with a speed of 2,000 rpm, while it can reach up to 5,000 rpm with the cover on. With a good torque capacity, ...

See the other products
Cross & Morse
flexible coupling / misalignment correction
flexible coupling
LNC series

Torque: 23 Nm - 498 Nm
Rotational speed: 100 rpm - 5000 rpm

The LNC series is manufactured by Cross Morse, and is a Derlin coupling which has a medium to high speed ranging from 100 to 5,000 rpm. It is resistant to corrosion which can operate at a temperature of -30°C to +66°C. It also has an ...

See the other products
Cross & Morse
flexible coupling / jaw
flexible coupling
0.4 - 712 Nm | L series

Torque: 0.4 Nm - 712 Nm
Rotational speed: 4200 rpm - 31000 rpm

The Type L couplings are designed for medium to high speeds up to 31,000 rpm. These cost-effective units are available with 4 different insert materials and are compatible with industry Std. They are intended for applications including ...

See the other products
Cross & Morse
torsionally flexible coupling
torsionally flexible coupling
Morflex series

Torque: 17.5 Nm - 1505 Nm
Rotational speed: 3800 rpm - 6500 rpm

The Morflex series from Cross & Morse, is a flexible coupling with good torsional damping. The Morflex series is a medium speed coupling, with a maximum speed of up to 6500 rpm. Features of the coupling include good misalignment capability, ...

See the other products
Cross & Morse
gear coupling / flexible
gear coupling
GF series

Torque: 11 Nm - 410 Nm
Rotational speed: 4000 rpm - 14000 rpm

The GF series is manufactured by Cross Morse, and is a polymer sleeve gear coupling which is highly utilized for lower power applications. It is available in 10 sizes with torque output of 410 Nm and shaft speeds of up to 14,000 rpm. ...

See the other products
Cross & Morse
flexible coupling
flexible coupling
16.00 - 200.00 kNm | RATO DS

Torque: 16 Nm - 200 Nm
Rotational speed: 975 rpm - 1825 rpm

Vulkan's RATO DS Couplings are generally utilized for installation applications that require comprehensive levels of torsional flexibility and moderate levels of misalignment capacities. The couplings are also used for energy, and oil- ...

flexible coupling
flexible coupling
0.20 - 25.00 kNm | VULKARDAN E

Torque: 200 Nm - 25000 Nm
Rotational speed: 1800 rpm - 5000 rpm

The Vulkardan E can project a torque range from 0.16 kNm up to 20.00 kNm. It can be utilized in a variety of applications including the material handling of energy, Iron & Steel, Oil & Gas, and construction and mining. This is highly-flexible ...

flexible shaft coupling / anti-vibration
flexible shaft coupling
0.20 - 16.00 kNm | VULKARDAN L

Torque: 200 Nm - 40000 Nm
Rotational speed: 1450 rpm - 5000 rpm

Vulkan Drive Tech's Vulkardan L couplings were design for simultaneous use with cardan shafts. The couplings shield both the cardan shafts and driven machinery from inadmissible vibratory loads. Its construction consists of highly flexible ...

flexible shaft coupling
flexible shaft coupling
ISS

Torque: 3150 Nm - 20000 Nm

Vulkan's integral shaft supports (ISS) were developed for applications that require torsionally flexible connection of a cardan shaft (long, heavy) in a comparably large angle of inclination. The connected shaftline should have limited ...

flexible coupling / curved-tooth gear
flexible coupling
1000 Nm - 560000 Nm l DENFLEX

Torque: 2500 Nm - 1400000 Nm
Rotational speed: 1200 rpm - 8000 rpm

The Denflex NVD coupling has a torque transmission executed using internal and external teeth. The latter have an external clamshell teeth geometry (hub) that allows articulation with the internal teeth (sleeve). This combination supplies ...

flexible coupling / zero-backlash
flexible coupling
Rel¡-a-Flex® series

Rotational speed: 70000, 30000 rpm

The Reli-a-Flex® is a flexible shaft coupling developed by Reliance Precision Limited. It is mainly used for accurate movement between two shafts where a small amount of misalignment exists. This high integrity unit high reliability ...

See the other products
Reliance Precision Limited
Oldham coupling / flexible
Oldham coupling
MO series

Torque: 0.57 Nm - 3.65 Nm

The clam hub-type Oldham coupling from Reliance is developed with an optimum radial misalignment ability. It is supplied with zero backlash, with an acetal disc. The AT type designates an optimum torsional stiffness acetal disc, while ...

See the other products
Reliance Precision Limited
flexible coupling / bellows / metal
flexible coupling
RBK series

Torque: 0.15 Nm - 2 Nm
Rotational speed: 10000 rpm

The Flexible Coupling: Metal Bellows Coupling, manufactured by Reliance Precision Limited, is specifically designed in zero backlash and high torsional stiffness. This device is configured in aluminium alloy hubs design. It is also made ...

See the other products
Reliance Precision Limited
flexible coupling / disc / stainless steel
flexible coupling
RFS series

Torque: 0.2 Nm - 2 Nm
Rotational speed: 8000 rpm - 10000 rpm

Reliance's precision couplings are characterized by the possible accommodation of different shaft degree misalignment. They come in a one-piece structure, ensuring a backlash-free operation. The Reli-a-FlexTM range can deliver high torsional ...

See the other products
Reliance Precision Limited
membrane coupling / polyamide / aluminum / steel
membrane coupling
RFSKK series

Torque: 0.4 Nm - 0.6 Nm
Rotational speed: 12000 rpm

Integral clamp with alloy steel (blackened) socket head screw. Hubs anodised aluminium alloy. Polyamide 6.6 fibreglass reinforced membrane disc. Bore diameter tolerance H8.

See the other products
Reliance Precision Limited
elastomer coupling / Oldham / transmission
elastomer coupling

Torque: 15 Nm - 2000 Nm

EKH with split-hub design • simple installation due to split-hub design • can be combined with EKM - hub or ESM-A - hub • mountable without disassembly of motor

See the other products
JAKOB
flexible coupling / flange / transmission
flexible coupling

Torque: 40 Nm - 1600 Nm

KGE • for standardized interface connection DIN - EN - ISO 9409 - 1 • two-part connection flange • compact design • Torque range: 40 - 1600 Nm • shaft diameter: 12 - 90 mm • simple installation with radial EASY-clamping hub at output side

See the other products
JAKOB
flexible coupling
flexible coupling

Torque: 10 Nm - 400 Nm

KPH /KMH /KRH • simple installation - now also with splitted hub design on both sides • stainless design - variable length • Torque range: 10 - 400 Nm • Shaft diameter: 6 - 55 mm

See the other products
JAKOB
flexible coupling / bellows / metal
flexible coupling
KM series

Torque: 20 Nm - 1800 Nm

See the other products
JAKOB
flexible coupling / bellows / metal
flexible coupling
KP series

Torque: 25 Nm - 900 Nm

This metal bellows coupling contains a torque that has a range from 25 - 900 Nm and a shaft diameter from 9 - 75 mm. The product is also equipped with a 4-corrugation bellows having a short design, a high torsional stiffness. It also ...

See the other products
JAKOB
torsionally flexible coupling / membrane / transmission / encoder
torsionally flexible coupling
RIC Membrane Coupling

Torque: 0.2 Nm - 80 Nm
Rotational speed: max 10000.0 rpm

(1) REACH has rich experience in the production of foreign high-end coupling brands for a long time, and has built up a first-class professional design team to guarantee product quality performance. (2)REACH coupling is aimed at high-end ...

flexible coupling / membrane / transmission / for pumps
flexible coupling
RDC Membrane Coupling

Torque: 15 Nm - 9000 Nm
Rotational speed: 0 rpm - 20000 rpm

(1) REACH has rich experience in the production of foreign high-end coupling brands for a long time, and has built up a first-class professional design team to guarantee product quality performance. (2)REACH coupling is aimed at high-end ...

flexible coupling / claw / transmission / steel
flexible coupling
GR Series:Standard Type Coupling

(1)Widely used under mechanical and hydraulic pressure circumstances; (2)No need to maintain by using steel in conjunction with polyurethane; (3)Compensate relevant deviation, buffer and absorb vibration; (4)Better insulate ...

flexible coupling / gear / curved-tooth gear / drum type
flexible coupling

Torque: 10 Nm - 2500 Nm

Applicable to various mechanical engineering and hydraulic fields. Nylon and steel combined, maintenance-free. Axial, radial and angular installation deviations can be compensated. Axial plugging assembly which is very convenient. Finished ...