Flange couplings

Torque: 35 Nm - 150 Nm
Rotational speed: 7,800 rpm - 22,500 rpm

couplings are shaft connections and transmit torsionally stiff and backlash-free torque. At the same time, they compensate for angular and axial misalignments in single-jointed couplings (Type 950._ _ ...

Torque: 190 Nm - 10,000 Nm
Rotational speed: 8,000 rpm - 30,000 rpm

Backlash-free shaft couplings for torque transducers Torsionally stiff Flexible modular system Backlash Free Compensation of shaft misalignment Continuous temperature up to 120°C Product features Application For ...

Torque: 1,277 Nm - 185,154 Nm
Rotational speed: 2,000 rpm - 9,000 rpm

... with standard AGMA flange interface By incorporating the latest advances in Finite Element Analysis technology, Lovejoy's HercuFlex design has revolutionized the flange gear coupling. ...

Torque: 904 Nm - 161,003 Nm
Rotational speed: 2,000 rpm - 9,000 rpm

... transformed the HercuFlex coupling to integrate an advanced seal design when performance degradation is not tolerable. This advanced gear coupling still encompasses the torque and misalignment capacities ...

Torque: 192.3 Nm - 154,095.6 Nm
Rotational speed: 2.7 rpm - 2,164 rpm

couplings are offered in two different styles. Type II coupling consists of two rigid hubs, adjusting nut and split ring and split ring for motor bub. Type IV coupling consists of two ...

Torque: 196 Nm - 173,000 Nm

Most popular multipurpose type Standard (Inch sizes available) Electroless Nickel-Plated Stainless Features Multipurpose locking devices easy to install and remove. Extensive range of sizes and compatible with large diameter shafts. Fewer ...

Torque: 382 Nm - 429,000 Nm

High torque transmission capacity type Standard Electroless Nickel-Plated Features Capable of transmitting 1.5 to 3 times the AS Series rated torque capacity. With its centering feature, eliminates the hassle of machining on hubs ...

Torque: 5 Nm - 9,900 Nm

Compatible with a wide range of shaft tolerances Standard Electroless Nickel-Plated Stainless Steel Low Contact Pressure type Locking Principles and Features Designed to suit a wide range of shaft tolerances (except for KP models). ...

Torque: 8,200 Nm - 16,250 Nm
Rotational speed: 2,100 rpm - 2,300 rpm

... of the well-established VULKARDAN E and complements the VULKAN highly flexible couplings product portfolio below the RATO R torque range. In comparison to similar couplings the VULKARDAN F is characterized ...

Torque: 12,500 Nm - 800,000 Nm
Rotational speed: 500 rpm - 2,100 rpm

Applications Flexibly mounted engines, rigidly mounted engines The highly-flexible RATO S coupling is a torsionally flexible rubber coupling that compensates radial, axial and angular shaft displacements ...

Torque: 180,000 Nm - 360,000 Nm
Rotational speed: 690 rpm - 800 rpm

Applications Flexibly mounted engines, rigidly mounted engines The highly-flexible RATO S+ coupling is a torsionally flexible rubber coupling that compensates radial, axial and angular shaft displacements ...

Torque: 46 Nm - 17,000 Nm

... shaft all the way up to the flange. ETP-EXPRESS has extremely small built-in dimensions. CONSTRUCTION ETP-EXPRESS consists of a double-walled hardened steel sleeve filled with a pressure medium and a flange. ...

Torque: 60 Nm - 1,200 Nm

... hardened steel sleeve filled with a specially developed pressure medium and a flange. The flange part contains screw and piston with seals to maintain pressure. In the flange there ...

Torque: 50 Nm - 32,000 Nm

ETP-TECHNO consists of a double-walled hardened steel sleeve filled with a pressure medium, and a flange. The flange part contains the pressurizing mechanism, which consists of a screw and piston with ...

Torque: 1 Nm - 600 Nm

The Metal bellows coupling is equipped with a hub that is made from aluminum and bellows made from stainless steel. This coupling requires short assembly time and an easy installation due to the presence ...

Torque: 1 Nm - 7 Nm
Rotational speed: 0 rpm - 8,000 rpm

... an oldham-type coupling with a radial clamping hub, manufactured by Norelem. The unit is made out of spacer polyacetal, while the hub is made out of aluminum. It has a short assembly time, due to the radial clamping hub. ...

Torque: 530 Nm - 11,560 Nm

The conical clamping rings 23351 form B can be fully recessed when in a hub connection. The advantage of this particular arrangement is the transfer of higher torques. If the clamping ring needs to be loosened without the dismantling ...

Clamping rings are provided with a fastening possibility for sensors, switches etc. Universal applicability, e.g. as a limit switch on a piston rod. Clamping ring made of stainless steel with strong clamping force. Material Screw ...

Torque: 3.4 Nm - 95 Nm
Rotational speed: 3,000 rpm

These flexible and very robust couplings consist of only 3 parts and are intended for non-continuous operation. They offer zero-play operation, a high torsional stiffness and are easy to mount in even difficult installations. ...

Torque: 15,000 Nm
Rotational speed: 19,000 rpm

Spider couplings, also known as jaw couplings, are torsionally flexible shaft couplings which enable the connection of shafts or flanges via a polyurethane drive ring. Parallel, ...

Torque: 192 Nm - 161,003 Nm
Rotational speed: 2,000 rpm - 9,000 rpm

Gear-couplings are the foremost coupling type. They can do things that many other coupling types are unable to perform, or that need expensive modifications and de-rating to function. ...

Torque: 23.88 Nm - 300,000 Nm
Rotational speed: 3,300 rpm - 11,000 rpm

... of anti-static, flameproof couplings is able to accept angular, radial and axial misalignment, they are torsionally resilient, non-lubricating and capable of operating between temperatures of 50°C and +105°C. These ...

Torque: 170 Nm - 2,300 Nm

three-part design corrosion-resistant in stainless steel Features High transmissible torques Tightening of clamping screws with a torque wrench Easy disassembly without jacking screws Centres the hollow shaft ...

Torque: 330 Nm - 4,225,000 Nm

two-part design highest torque capacity Features Highest torque capacity Easy, quick assembly by tightening ­clamping screws without a torque wrench Distance-controlled assembly ensures ­guaranteed transmissible torques ...

Torque: 165 Nm - 36,200 Nm

two-part design high torque capacity Features High torque capacity Easy, quick assembly by tightening ­clamping screws without a torque wrench Distance-controlled assembly ensures ­guaranteed transmissible torques ...

Torque: 0.18 Nm - 50.7 Nm
Rotational speed: 30,000, 45,000, 35,000 rpm

... connecting two shaft ends. The MIC-5 (double-element coupling) also provides compensation for radial misalignment. On demand, MIC Series Couplings are available in an electrically isolated version, ...

Torque: 30 Nm - 450 Nm
Rotational speed: 10,000 rpm

... hubs. The couplings are both torsionally stiff and flexible in order to compensate for axial, angular and radial misalignment when connecting two shaft ends. The high torsional spring rate of the couplings ...

Torque: 78 Nm - 23,780 Nm
Rotational speed: 1,060 rpm - 6,000 rpm

Features - Simple in construction - Power transmission through high tensile bolts - Highly stiff rubber Bushes are capable to bear the shock load - Rubber bushes remain unaffected from water, oil or dust & suit to temperature up to ...

... lubrication required as there is no relative motion between coupling parts - Easy tyre replacement without dismantling driver or driven position - Available with taper bush facility in “F” & “H” type flanges - ...

Features - Sustain very high torque rating - Suitable for high speed applications - Heavy duty design with flexibility - Counters all types misalignment i.e. axial, parallel & angular & large axial movement capacity - Suitable for ...

The Taper bushes represent a simple and cost effective solution for securing a connection between sprockets, pulleys and couplings to a variety shafts with metric and imperial dimensions, and general commercial tolerances ...

Torque: 0.4 Nm - 712 Nm
Rotational speed: 4,200 rpm - 31,000 rpm

The Type L couplings are designed for medium to high speeds up to 31,000 rpm. These cost-effective units are available with 4 different insert materials and are compatible with industry Std. They are intended for applications ...

Torque: 33 Nm - 3,300 Nm
Rotational speed: 100 rpm - 7,500 rpm

The KE series is a flexible coupling that is ideal for use in operations with low up to moderate speeds. It is also reliable even in oily and dirty environments. The series has a rated speed lesser that or equal to 7,700 ...

Torque: 15,500 Nm - 337,500 Nm
Rotational speed: 750 rpm - 2,750 rpm

... mounted engines such as compressors or pumps in a high torque range Complementary to the all-round RATO S coupling the highly flexible RATO R coupling has been specially designed for use in installations ...

Torque: 8,000 Nm - 200,000 Nm
Rotational speed: 1,040 rpm - 2,100 rpm

Applications Rigidly or flexible mounted engines such as compressors or pumps in a high torque range The highly flexible RATO DS coupling has been specially designed for use in installations requiring a high level ...

Torque: 12,500 Nm - 250,000 Nm
Rotational speed: 1,080 rpm - 2,550 rpm

Torsionally highly flexible coupling with a fabric reinforced elastic element that is suitable for multidirectional flexibility. Applications High Speed Shaft of machinery driven by diesel engines is subjected to ...

Torque: 100 Nm - 3,240 Nm

... installation of the SGFlex couplings without moving parts of the machinery. “Standard” flexible couplings are elastic coupling elements developed for installation in the most diverse ...

Torque: 210 Nm - 3,240 Nm
Rotational speed: 7,200 rpm

... FLEXIBLE COUPLING ASSEMBLY The new SGFlex-3F Series coupling system incorporates industry proven SGFlex couplings with solid steel flanges or flywheel combinations to ...

Torque: 4,300 Nm - 13,200 Nm
Rotational speed: 3,400 rpm - 4,100 rpm

The nex SGFlex-LC coupling system covers the torque range between our SGFlex-3F and TENBEX-ECO coupling systems. The SGFlex link assemblies inside the coupling work with seperate link ...

Torque: 200 Nm - 110,000 Nm
Rotational speed: 1,300 rpm - 4,200 rpm

ARCUSAFLEX - Highly torsionally flexible rubber disc coupling for internal combustion engine drives * Very high torsional flexibility with a linear torsional deflection characteristic * High torsional vibration and shock ...

Torque: 100 Nm - 10,000 Nm
Rotational speed: 1,800 rpm - 10,000 rpm

TOK Coupling System * Elements available in different torsional stiffnesses * Suited for highest speeds * Adaptation to DIN or SAE flanges or according to specification * Self-centering, backlash-free ...

Torque: 390 Nm - 20,000 Nm
Rotational speed: 2,100 rpm - 4,500 rpm

... torsionally flexible coupling ARCUSAFLEX-VSK for drive shafts * Linear torsional deflection characteristic * Elements available in different torsional stiffnesses * Enhanced damping capacity through frictional damping * ...

Torque: 355 Nm - 512,635 Nm

... towards the screw head. For disassembly only few release screws are required. Through optimised geometry of the flange, the deformation of the flange is significantly lower than with standard products. Explanations L ...

Torque: 530 Nm - 63,903 Nm

Locking Assembly RfN 7004 Extended version of the Locking Assembly RfN 7003 allowing for use with smaller hub diameters due to the reduced shaft and hub pressures. Characteristics Is the extended design of series RfN 7003. Here, ...

Torque: 649 Nm - 1,760,000 Nm

Locking Assembly RfN 7005 Three piece self-centering design for heavy duty torques. Characteristics Three piece, self-centering, slitted locking assemblies for highest bending moments and torques. During assembly a minor axial displacement ...

Torque: 190 Nm - 2,800 Nm

Cone Clamping Elements RLK 110 K centres the hub to the shaft corrosion protected Features - Centres the shaft to the hub - All parts 35 µm chemically nickel-coated for high corrosion resistance pursuant to DIN 50021 (neutral salt ...

Torque: 840 Nm - 414,500 Nm

Cone Clamping Elements RLK 402 TC centres the hub to the shaft Premium quality with double slot Features - Centres the hub to the shaft - Highest transmissible torque - For heavy duty applications - No axial displacement between ...

Torque: 7,000 Nm - 1,206,000 Nm

Cone Clamping Elements RLK 404 centres the hub to the shaft high transmissible torque Features - Centres the hub to the shaft - High transmissible torque - No axial displacement between hub and shaft during clamping procedure - ...

Torque: 0.6 Nm - 200 Nm
Rotational speed: 6,000 rpm - 42,000 rpm

... Actuator / Surface-mount machine / High precision XY stage / Index table Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Please ...

Torque: 0.42 Nm - 14 Nm
Rotational speed: 11,000 rpm - 42,000 rpm

... Actuator / Surface-mount machine / High precision XY stage / Index table Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Please ...

Torque: 0.42 Nm - 14 Nm
Rotational speed: 11,000 rpm - 42,000 rpm

... Actuator / Surface-mount machine / High precision XY stage / Index table Optional Services -Couplings Bore and Keyway Additional Modification Service -Coupling Stainless Steel Screw Alteration Service Please ...

• up to 6m length without additional intermediate storage • no compensating coupling elements necessary • Conical clamping hub, symmetrical on both sides, or Optional easy-to-assemble half-shell hub • Two tube sizes ...

Torque: min 20.0 Nm

KM • simple installation, with EASY-Clamping hub on both sides • 6-corrugation bellows - cost-effective standard series • Torque range: 20 - 1.800 Nm • Shaft diameter: 8 - 85 mm

Torque: 40 Nm - 2,000 Nm
Rotational speed: 12,000 rpm - 34,000 rpm

• With flange hubs on both sides for variable attachment • 2 - 4 - 6 - corrugated metal bellows • high operating speeds / rotationally symmetrical design