Mixer dispensers (powders, granulates)

38 companies | 140 products
Filters
  • What’s new?
    Submit

The new GRAVIMAX B14 blender with material hoppers and their valves designed to...

The valves and the material hoppers of this device are specifically designed to negate the possibility of 'bridge building'....

It comes in the batch sizes of 9 kg (20 lbs). The Valve dimensions...

It comes in the batch sizes of 9 kg (20 lbs). The Valve dimensions...

{{productDetail[78380]}}

The PolyRex is a double-deck preparation station manufactured by ProMinent. Specifically created for powdery and...

{{productDetail[6048]}}

The MBF Micro-Batch Feeder is used to continuously feed volumes of powdery or granular materials. It is comprised of a steel-reinforced SINT engineering polymer body (the body can be entirely manufactured...

{{productDetail[29492]}}

Get accurate blends, better mixing, faster material changes and increased profits with Conair’s TrueBlend Series Blenders. Steep-sided component hoppers...

TrueBlend high-temperature models allow processors running engineering plastics like ABS, nylon, polycarbonate and PET to blend these resins after they have been dried.

Until...

When process flow specifications dictate that materials are dried and then blended, your process can suffer from unwanted moisture regain...

Increased profits, better mixing, accurate blends and faster material changes are all benefits of this item. The TrueBlend series blenders were designed...

Blending and mixing at industrial level is done best by Conair's TrueBlend Series of Blenders. This blender gives excellent results with its steep component hoppers. These hoppers facilitate...

{{productDetail[85611]}}

The valves and hoppers of this item are designed to prevent the "bridge building"...

This device is ensures that 'bridge building' is not possible, because of the design of the valves. As a direct...

The batch size of 11lbs (5kg) is an important aspect of this device, as is the valve...

From the widely known Wittmann Battenrfeld group of equipment comes GRAVIMAX series...

The GRAVIMAX series 18 has a maximum of 8 number of components with...

{{productDetail[13893]}}

The TPM Batch Powder Mixer is used in dispersing extensive soluble powders. This is done by adding the...

{{productDetail[5697]}}

Matrasur Composites' HV 500 BN machine reach is particularly intended for the infusion or cast of robust surface (Resin & Ath) and polyconcrete...

{{productDetail[41028]}}

The Minicolor V is manufactured by Motan Colortonic, and is attached along the machine...

Generally utilized as a central mixing station, this Motan-Colortronic-engineered apparatus is capable of dosing...

The Minicolor G is a compact gravimetric dosing and mixing unit manufactured by Motan. It was designed for one main component, and one additive in granular form. The device is suitable...

The GRAVICOLOR 30 is a gravimetric dispenser manufactured by Motan-Colortronic. It can meter and blend up to 4 materials, providing high...

The GRAVICOLOR 60 Model is a gravimetric mixer and dispenser manufactured by Motan Colortronic. It is specifically intended for...

{{productDetail[25442]}}

The anti-bridging dosing units are modular devices that allow dosing of various bulk products, continuously or discontinuously. The interchangeability of the elements making up the dosers allow them to cover a wide...

{{productDetail[15721]}}

- Integrated unit for dosing and turbo-mixing
- Designed to be used up to three products
- Dosing capacity controlled by inverter
-...

{{productDetail[37285]}}

From the Heating Mixer TRH to the Mixing Plant COHBIMIX-HC with
High Efficiency Cooler all responding the most rigorous production
requiremems.
Applications all over the world lor PVC...


This is the result of the combination of the Heating Mixer TRM and the
High Efficiency Cooler HEC in order to satisly the most...

COMBIMIX-RO is the combination of the Heating Mixer TRM and the
Horizotal Cooler...


COMBIMIX-RV is the combination between the Heating Mixer TRM
and the Vertical...

The Research and Development of the plastic materials is so important
that in order to meet our customers needs. we have developed
laboratory systems lor PVC mixing.
Available...

{{productDetail[29999]}}

The FGB MECS is the smallest GRAVIMIX dosing blending system, which is designed for perfect and efficient of dry & freeflowing thermoplastic materials. It is an improved version of an already introduced revolutionary product, FGB MINI....

The FGB FLECS is manufactured by Ferlin, and is a dosing-mixing system that is intended for efficient and precise dosing of dry and free flowing thermoplastic materials. It is suitable for injection...

The FGB 5 dosing-mixing system is designed and developed for the efficient and precise dosing of dry and free flowing thermoplastic materials. The FGB 5 is commonly used in extrusion and injection molding and blow molding machines....

The Ravimix FGB 10 dosing-mixing system is designed and developed for the efficient dispensing of free-flowing thermoplastic materials. The FGB 10 is commonly used for larger extruders, blow molding...

The GRAVIMIX FGB 25 , the largest dosing-mixing system, developed specifically for efficient dispensing of free-flowing thermoplastic materials and used for blow molding machines, central mixers, multi processing machines, large extruders...

{{productDetail[75986]}}

Gravimetric, continuously operating dosing and mixing
system
Maicomponent supplied ifree flow or by means of a
dosing station
1 dosing statiofor the maicomponent and maximum
8...

Gravimetric, continuously operating dosing system
Maicomponent supplied ifree flow or by using of a
dosing station
Maximum 4 dosing stations to add secondary
components
Simultaneous...

Gravimetric, continuously operating metering system
Attachment to the GRAMIX E or GRAMIX S9 metering
systems or as standalone solution
Minimum dosage of 200 g/h...

Volumetric, continuously operating dosing machine
Dosing is executed via dosing screws with servo drive
5 different MH60 screw sets cabe used for varying
throughput areas with a dosing precisioof ± 2 %
(... > 1 kg/h) or ±...

{{productDetail[14511]}}

The E-955 Series – Blending Scale raises by Premier Tech Chronos (PTC) the bar with its high industry norms using its expertise accomplished via its sales of thousands of scales globally....

{{productDetail[40427]}}

The small KK mixer is a pre-mixer for powder...

The G mixer is a pre-mixer for medium-sized machine throughputs,...

The V pre-mixers are the larger relations of the KK and G mixers.

They really show...

The G x pre-mixers are optimised for use on extruders and blow moulding machines.

Dosing...

Like the smaller G x siblings, the machines in the V x family are designed for use on extruders and blow moulding machines.

Thorough...

{{productDetail[50062]}}

Fiber-reinforced plastics with long fibers offer outstanding lightweight construction properties and high potential in terms of energy absorption. The dual-machine technology...

{{productDetail[70088]}}

DecTechnology presents MicroPTS for volumetric dosing of small powder quantities. It provides dosing in the range of 1mg to 100g. Dosage can be adjusted during the process. Using vacuum action, the product is filled in a calibrated...

{{productDetail[68500]}}

The BD Series Blender offers the exclusive diamond slide gate design features a proportional cross section to accurately dispense...

The OA Series Gravimetric Batch Blending System features precision auger metering of all ingredients. This weigh scale blending system is well suited for blending of almost all pellet...

{{productDetail[52783]}}

The smallest GRAVIMASTER dosing-blending system GM 0.5 is designed for efficient and accu- rate dosing of dry, free-flowing thermoplastic materials. The GM 0.5 is especially suited for injection moul- ding, small extrusion and blow-moulding machines where consistency and high quality of the finished product is...

The smallest GRAVIMASTER dosing-blending system GM 1.5 is designed for efficient and accu- rate dosing/ blending of dry, free-flowing thermo- plastic materials. The GM 1.5 is often used on injection moulding, extrusion, and blow-moulding machines where consistency and high quality of the finished product is required. GRAVIMASTER...

The GRAVIMASTER dosing-blending system GM 5 is designed for efficient and accurate dosing/blen- ding of dry, free-flowing thermoplastic materials. The GM 5 is often used on injection moulding, extrusion, and blow-moulding machines where consistency and high quality of the finished pro- duct is required. GRAVIMASTER records...

The GRAVIMASTER dosing-blending system GM 10 is designed for efficient and accurate dosing/blen- ding of dry, free-flowing thermoplastic materials. The GM 10 is often used on injection moulding, extrusion, and blowmoulding machines where con- sistency and high quality of the finished product is required. Owing...

The GRAVIMASTER dosing-blending system GM 25 is a large sized system designed for efficient dosing/blending of free-flowing thermoplastic materials. The GM 25 is suitable for large extru- ders, blow-moulding machines, and as central- blender to feed several processing machines where consistency and high quality of thefinished product...

{{productDetail[16937]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation