|
|
|
|
|
|
The CAP-O-MAT is a mature multifunction system designed to meet the technical and commercial canmaking challenge of the future.
High level of process capability.
Wide variety of application.
Safety and operator protection.
All die-operating tools are designed with overload protection and as cartridge tools for quick and easy change over.
The pre-curl station can be equipped with rail pre-curling technology, which reduces the tooling costs.
Alternativly the pre-curl station can be achieved in die pre-curling technology.
CAP-O-MAT cap forming toolings (twist off) for 1st, 2nd and 3rd operation.
The pre-curl station prepares the cap for curling. The pre-curl geometry takes into account nosing and curl radius.
Alternativly the pre-curl station can be equipped with die pre-curling technology.
The curling station prepares the cap for the lugging station. The curl geometry is determined by the lugging station.
The lugging station determines the appearance of the cap. The function and appearance of the lug have been developed with optimum geometry in mind.
|
|
Composite tube manufacturing lines
Aluminum-plastic composite tubes are constantly being used in new applications. The reasons are quick installation, corrosion-resistance, and last but not least, lower costs. Hot /cold water pipes and chemical tubes are but a few of the many possible applications. DREISTERN cooperates with the leading extrusion manufacturer MAILLEFER Ecublens (CH) and supplies turn-key machines for very high productivity.
|
|
This automatic machine is perfect for producing buttons on both sides.
Through its severa! interchangeable work units, it is possible to produce
both standard buttons (for shirts, jackets, trousers) and fantasy buttons for women's wear. It is a/so suitable for the production of costume jewellery such as beads or buckies. Watch all others models to www.tulliogiusi.it
|
|
Cutting machines
Automatique cross cutter ZA 430 the convenient cross cutter for paper, cardboard and film rolls, with a slitting system for film as an option. The number and length of the sheets can be preset. Operating instructions in plain language make handling easy.
|
|
CutMaster F 2200 ST
Folio sheeter
tandem piler version ST
CutMaster F 2200 S
Folio sheeter
single piler version S
Applications:
Folio-size sheeting - paper
|
|
|
Hosokawa's classifiers are engineered to meet industry's increasing need for finer particles and more narrow particle size distribution. Our classifiers are designed to consistently produce particle size distributions that are: uniform and homogeneous; spherical and smooth and dry and easily dispersible. Our broad range of classifiers have application in the pharmaceutical, toner, ceramic, metal powders and plastic industries. Each classifier is designed for easy operation and maintenance. Particle size is easily adjusted by changing rotor speed or airflow and the modular design provides easy access to the classifier's internal components which results in simple product changeover. The unique mechanical design produces high recovery rates of fine particles, up to 90%. The streamlined component design results in lower pressure drop and subsequently
|
|
The Platinen-Cleaner Evomat 05
cleans blanks, tailored blanks, moulded blanks or aluminium blanks before the infeed into a press line.
|
|
|
|
|
|
High productivity and reliable press for briquetting of bio-mass containing cellulose:
- Wood industry
- wood and cellulose processing industry waste
- agricultural plant waste: straw, vineyard plants, corn stems, sunflower, tobacco, cotton, olives, etc.
The press consists of:
Welded and heat-treated body;
Crank mechanism, creating technological force;
Guided piston;
Screw feeder with frequency regulation of the revolutions
Mixing bunker with capacity of 3 m3.
Safety cut-off plate against overloading;
Tool block with pressing hydraulic cylinder;
Technological process control system.
* Hydraulic tightening of the tool
* maximum productivity - upto 600 kg/h
* Cooling tunnel length - 7000 mm
TECHNICAL DATA:
Max. capacity: 600 kg/h
Piston stroke: 200 mm
Strokes per minute 200 rpm
Tooldiameter: 60 mm
Vertical screw feeding device with motor-reducer, power: 3,0 kW
Screw feeding device 2,2 kW
Mixing bunker with capacity of 3 m3 2,2 kW
Total installed capacity: 57 kW
Consumed power when entering into normal
technological regime: 24 kW
Main motor capacity: 45 kW
Oiling, by oil circulation under pressure with 2 pcs gear pumps
Oil cooler - cooling by water.
Automatic hydraulic pliers
|
|
|
Used, our metal chip briquetter can transform ordinary industrial turnings, fillings, chips, clippings-even metallic dust-into dense, economically processed, compact briquettes that command prices much greater than non-compacted scrap metal. Turn your scrap copper, aluminum, and other metals into dense chips with a hydraulic briquetting press and make your recycling process a money-making venture. Aluminum scrap metal, copper scraps, and scrap brass no longer need to be the bane of your business, they can be a profit center for your company.
|
|
The CAN-O-MAT is a mature multi-function system designed to meet the technical and commercial canmaking challenge of the future.
High level of technical maturity
High level of process capability
High level of modularity
Quick retooling
Wide variety of applications
Extremely high productivity
Top product quality
Safety and operator protection
|
|
Sweco's Turbo-Screen Air Classifier is the clear choice for separation of dry particulate. It provides continuous, precise screening of dry materials, especially in the finer particle sizes. This unit uses a variety of screen sizes from 60 to 600 mesh for efficient separation of particles ranging from 25 to 300 microns. It can handle the most difficult materials, including electrostatic materials and particles that tend to agglomerate easily.
Unlike a standard air classifier, the Turbo-Screen system provides an absolute cut. This has opened new possibilities for fine-particle separation within a wide variety of industries, including but not limited to food, chemical, powdered metal, plastic, electronics, pharmaceuticals and ceramics.
|
|
|
|
|
|
Ecutec Barcelona S.L., a recent acquisition of Sweco, is a company that specializes in classifying, coating and grinding of fine and ultra-fine powders. Ecutec provides complete integrated turnkey systems as well as precision, stand-alone equipment. Ecutec turnkey systems are based on Ecutec classifier technology. These systems typically include a mill, classifier and peripherals for a complete particle size reduction circuit.
Ecutec offers four different series of classifiers. First, the ALPHA series are dynamic classifiers that are designed for the production of fine products below 40 m. Secondly, the NEA Series air classifiers have been developed specifically for ultra-fine products with high added value. Next, the TFS series are horizontal dynamic classifiers that produce ultra-fine products down to d98<2 m on an industrial scale at a highly competitive energy consumption compared to alternative process technologies. Finally, the ULS series of classifiers belong to the family of internal draught or unit air classifiers.
Ecutec also offers 3 different series of mills: the SMW series of pin mills, the KGM series of ball mills, and the VRM series of vertical roller mills.
Ecutec is highly experienced in all kinds of dry processes especially for products of 5 microns or below. Applications include but are not limited to the following: calcium carbonates, talcum, mica, quartz, zircon oxide, alumina barites, foodstuff and chemical products.
|
|
Complete, pre-configured solutions for unwinding or rewinding rolled material.
Entire system designed specifically for your application by Double Es expert engineers.
Pre-assembled stand has a warranty as a package from one supplier. All components work together for optimal winding control without the hassle of installing each accessory.
Stands are configured for various web widths and roll sizes to minimize costs while providing proper loading properties.
Flexible design allows low costs for all applications from simple stationary unwind stands to more complex motorized rewind stands. Prices for new equipment from Double E are often lower than comparable used equipment.
Stands can be configured for multiple web materials and/or paths for manufacturing flexibility.
Double E stocks all non-custom parts and manufactures custom accessories (like shafts) quickly to enable unusually fast lead times on the complete package.
|
|
Specification of ND-LAW-5B
The machine is used in automatically winding hook type commutator armature, it is suitable for winding medium and big wire diameter armature.
Technical Parameter:
Wire diameter range: 0.16~1.2 mm
Armature diameter: 20~60 mm
Stack length: 10~70 mm
Shaft diameter: 3~15 mm
Shaft length: less than 250mm
Armature Slot: even slot
Turn number: 0~9999
Commutator diameter: 8~40 mm
Winding speed: 0~2500 rpm
Winding motor power: 1.5KWX2
Angle detecting speed: 0~3000 rpm
Angle detecting motor power: 0.75KWX1
Air supply pressure: 4~6 Kg/cm2
The machine total power: 4.0 KW
Voltage: three phase AC 380V 50/60 Hz
Weight: 1250 Kg
Dimension: 2000(length)X1000(width)X1800(height)mm
|
|
WT 165.6.0
Semi automated system for the insulation displacement termination of ECO-TRONIC housings.
Features
* Terminating 2-10 ways connctor versions ECO-TRONIC pro and 2-20 ways connector versions ECO-TRONIC
* Economical product magazines
* Easy and clear to operate
* SPS control with plain language display
* Automated connector feed
* Single wire termination
* Empty-chamber programming
* Small, compact machine size
* Low power consumption
* Quality assurance through tests integrated into the programme
* Low setting up times when changing to different connectors
* Certification to CE and EMV
|
|
Destoner TSTSI
High-capacity machine for separating heavy particles, such as stones, lumps of soil, mud balls, magnetic and non-magnetic metals:
suction-type system with vacuum deck
precise adjustment of air volume
inspection windows
|
|
The machine is designed to carry out a vigorous cleaning action of the peas in grains.
The product undergoes two stages through which the following are eliminated in successive phases: stones, pieces of pods, leaves and other foreign matter.
Before proceeding to the other processing section, the product is separated from the water.
|
|
The current trend is the use of alcohol as fuel additive.5% to 10% alcohol can be added to the fuel without the engine requiring readjustment.There are numerous advantages for using alcohol:
Octane enhancer MTBE can be replaced
The CO emission of the engine is reduced
The dependence on imported crude oil can be reduced
The net CO2 is reduced
GEA Wiegand offers complete alcohol processing lines.Our engineers design systems for the treatment of raw material, fermentation and distillation. The crucial components are manufactured in our own manufacturing workshops under the most stringent quality control.
|
|
Water soluble solvents and multiple solvent mixtures may need to be separated from the water and/or separated into their individual components prior to reuse. MEGTEC offers complete extractive and azeotropic multi-component distillation systems for the separation and purification of solvents mixtures. Depending on customer and process requirements, these systems can be designed for either continuous or batch operations.
MEGTEC distillation systems are the preferred choice by customers in the chemical, pharmaceutical, and other specialty industries around the world for recovery, recycle, and reuse of solvents for applications ranging from solvent mixtures to solvent contaminated wastewater.
A range of distillation capabilities can be provided to include:
Extraction columns
Solvent/solvent separation
Solvent/water separation
Steam stripping systems/columns
Stripping/rectification columns
Vacuum columns
Adsorption systems
Wastewater treatment
|
|
The chemical, pharmaceutical and food industries and also the field of environmental technology all use and handle a wide range of solvents and volatile compounds in quite differing ways.
Whether concentrating, cleaning or recovering, working with these solvents requires a high level of practical experience and a theoretical understanding of the chemical engineering principles underlying the processes of evaporation, stripping and rectification.
GEA Wiegand employs the latest computer programs and up-to-date data bases in its design and planning, thereby simulating the plants in operation and achieving the best layout.
Our Research and Development Center is on hand should knowledge of particular product characteristics which are crucial to the design be lacking. This also enables complex plant systems to be designed and optimum operating conditions to be established when handling less familiar materials or material compounds.
|
|
|
We are glad to offer you an unique machinery that transforms the waste from gravel manufacturing into first quality facing brick.
|
|
CUSTOM MADE HIGH-PRESSURE SYSTEMS
Autofrettage equipment
Gas booster systems for airbag industry
Intensifiers for hydroforming
Special valve test equipment
Camshaft production equipment
Bolt tensioning equipment
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Hugo Beck supplies inserting machines for collating magazines and catalogues with one and/or several loose inserts of various kinds in the output range up to 15.000 cycles/hour.
Selective feeding and identification are also included in the delivery scope as is the colation of stacks.
|
|
|
The equipment is able to process powders and to form agglomerates with a porous structure so that the final product is able to instantly dissolve and absorb liquid. The application is mainly for the food, drink and dietetic markets were fine powders are use which, without the use of the instatizer, would form lumps that float on the surface of the liquid. The instantizer uses steam in the process ( is a re-wet agglomerator ) and produces a product with better flowability that ensure a repeatable batches for filling and tableting machines.
|
|
|
|
|
|
Route Express Horizontale
The horizontal Expressway is a horizontal conformator machine for the packaging of products
dishes to be put out of sachets.
Its operating process is identical to that of the Expressway vertical except the introduction of
document in the conformator which is automatic.
Its procedure is very simple:
To deposit manually or using a depilor documents on the conveyer of food, the remainder
is automatic.
The horizontal Expressway was designed to work in an independent way, on a table or
on any plane support.
If the horizontal Expressway should be frequently moved, or if one wants to integrate it
in a line of assembly, it is advised to associate a specific table to him which makes it possible to position
the compressor and a coil of film of large diameter (this film coil replaces that
integrated in the machine in order to remain always accessible).
This unit counts and machine enables you to connect: conveyer, automatic depilor (one or
several), label dispensers, stacker, printers,...
|
|
Mechanical machine: it does not require compressed air, therefore it can be installed in any working place, even in an office!
- Up to 20 packs/minute
- Power supply: 220V single phase
- Film: sinlge edge PE - max 300 mm
- Product feeding device: option
- Ingombro macchina: 640x700x1150 mm
|
|
The Mailmaster brings innovation and efficiency to your mailings.
The Mailmaster uses the flow wrapping principle with flat film and produces a thight wrap around your products.
The system is suitable for wrapping Magazines, Catalougues, Brochures and Mailing products for shipment.
Because of the tight pack no shrinking is required. Areas where this system can be used are Graphics industry, Logistics, Mailings, Post.
In conjunction with addressing systems a perfect Mailing line capable of 130 packs per minute can be produced.
|
|
|
|
Other manufacturing machines 
