|
|
| Products 121 to 150 of 234 |
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFEC Bracket WCB
Technical Data : Flow Rates up to a 150m3/h Total delivery heads up to 58m Temperature Ratings up to 90°C Pressure rating up to PN 6
Construction
Horizontal plastic Centrifugal Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Materials
Wetted parts AISI 316 Bearings SiC Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to 1000m3/h Total Delivery Heads Up to 220m Temperature from -150° to a 450°C Pressure Rating Up to PN 100
Construction
Horizontal Centrifugal Pump Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Sintered Silicon Carbide Bearings Bearing Frame and Close coupled execution
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
| Magnetic drive chemical pump type MNK/F, heavy duty design, plain bearings made of SSiC/SAFEGLIDE ® PLUS, eddy-current-free double can of CFRP/PTFE, magnetic coupling, permanent magnets of SmCo and NdFeB, impeller closed with back vanes, bare-shaft, nuts and bolts made of stainless steel, high-quality epoxy coating, inclusive test run, housing material: ductile cast iron EN-JS 1049 acc. to DIN EN 1563 (0.7043 DIN 1693), technical specification to ISO 15783 and DIN ISO 5199, dimensions to DIN EN 22858 / ISO 2858, flanges to DIN EN 1092-2, ISO 7005-2, housing end pressure PN 16 |
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFEC Bracket WCB
Technical Data : Flow Rates up to a 45m3/h Total delivery heads up to 35m Temperature Ratings up to 90°C Pressure rating up to PN 6
Construction
Horizontal plastic Centrifugal Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions |
|
Simple and versatile, the BM horizontal magnetic drive centrifugal pumps can be used with chemically aggressive liquids eliminating any risk of external leakage.
Thanks to the their magnetic coupling (transmission occurs by means of opposing magnets) and to the absence of rotating seals, this type of pump guarantees safe operation and the least possible maintenance. The pair of magnets in fact makes up the pump-motor connection: the shaft-motor magnet transmits rotary motion to the other magnet coupled to the impeller.
The liquids pumped must necessarily be clean, without the presence of suspended solids.
A wide variety of series versions are available with solutions for all industrial pumping needs. |
|
| Seal-less centrifugal magnetic drive pumps to better answer to the actual demands of the market. Pumps entirely realized with reinforced thermoplastic polymers, non-metallic components in contact with the pumped liquid, material combinations for the best performances. One execution allows the pump to accept the accidentally dryrunning operation also for different days. N-R-X: three sets of constructive materials for many applications: from clean water to waste and slightly abrasive liquids, strong alkali or the salts such as sodium hypoclorite, acids as chromic, nitric, sulphuric ones. Powerfull magnet assembly in Neodymium-Iron-Boron. |
|
Materials
Wetted parts AISI 316 Bearings SiC / Special Carbon Bracket WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 10m3/h Total delivery heads up to 110m Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Horizontal Peripheral Pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Self-balancing impeller Sintered Silicon Carbide Bearings / Special Carbon Two executions: Close coupled standard,Close coupled for high temperature ( up to 350°C)
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
Leakage free, turbine pump
As is common with corrosion resistant pumps, this series uses the magnetic drive method, eliminating all problems caused by liquid leakage. Its pump characteristics include a small flow rate and high head.
Built-in self-priming valve
The inlet side of the pump contains a self-priming valve. Self-priming is actuated quickly after initial priming.
Superior corrosion resistance
The main parts are manufactured from SCS313 or SCS14 stainless cast, allowing the pump to be used for transferring organic solvents and various other chemicals |
|
Materials
Part in contact with liquid PP / PVDF Shaft / Bearings Al2O3 / PTFE Bracket WCB
Pumping acids, hydrocarbon, liquid gases, dangerous fluids, explosive, toxic.
Technical Data : Flow Rates up to a 15m3/h Total delivery heads up to 70m Temperature Ratings up to 90°C Pressure rating up to PN 10
Construction
Horizontal plastic peripheral Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
Applications
Further material available if request
Various materials from the standard special Constructions
|
|
The cast solid centrifugal pumps are intended for the pumping of not very aggressive clear liquids. Compact group with standardized directional supports and disassembling Process. The dynamic sealing is obtained by standardized mechanical seal and the drive, by electrical motor is with standard IEC or lengthened shaft end.
Construction: cast iron ft. 20 or stainless steel AISI 316L.
These pumps are used for the water supply, the draining of tanks, ice-cold water the circulation in air-conditioning, the overpressure of water, the circuits of heating or fire.
Maximum performances:
- flows: 220 m3/h
- HMT: 95 mce
- Maximum Pressure: 10 bar
- Temperature: - 20°C with + 120°C
Version available In-Line. |
|
| Tough head requirements? Multi-stage pumps are the solution. App-lications include water supply and distribution, spray applications, ultra-filtration systems, irrigation and fire-fighting. Pump sizes from DN 40 to DN 300 can handle capacities up to 2,200 m3/h and heads up to 500 m in horizontal and vertical designs.Modular design enables a wide range of configurations with a mini-mum of components. Pumps can be configured for trouble-free handling of most water thanks to flexible con-struction in materials from cast iron to stainless steel and shaft sealing options such as stuffing boxes and mecha- nical seals. |
|
Goulds Model 3311 is a radial split, segmented ring multistage pump... a proven state-of-the-art design for the most demanding high pressure services. The modular design and parts interchangeability reduce maintenance and inventory costs. Compact size and flexible nozzle positions reduce space and piping costs. High reliability, optimum efficiency, and simplified maintenance combined with low initial cost and low operating costs make the 3311 a true world class pump.
Specifications:
Capacities to 1100 GPM (250 m3/hr)
Heads to 5250 feet (1600 m)
Temperatures to 356° F (180°C)
Pressures to 2320 psig (160 bar)
Design Features:
High Efficiency Performance is achieved by utilizing multiple hydraulics for each pump size. Reduce running costs by operating in the best efficiency range.
Modular Design permits option flexibility, reduces lead-times, and maximizes interchangeability. Spare parts inventory is reduced.
Ease of Maintenance is assured as roller bearings, mechanical seal, and balance device can be serviced without disturbing piping or driver.
Balance Drum/Disc Combination balances axial thrust over the full range of performance.
Rotating Element is dynamically balanced after individual balancing of the impellers. First critical speed is always above maximum operating speed.
Multiple Nozzle Orientations to fit your piping configurations. |
|
The range of multistage pumps includes a series of horizontal pump, MCH, and a range of vertical pump, MCV. The horizontal types can also be supplied in a self-priming version, MCHZ.
|
|
Multistage centrifugal pump with row arranged impellers on the common shaft. Easy adapting in accordance with the existing pipeline achived by rotation of the suction and discharge connection positions for 90°.
Technical data:
Capacity Up to 100 l/sec
Head Up to 300 m
Temperature Up to 160 °C
Available materials:
Cast Iron (Gray, Ductile)
Cast steel
SS (AISI 304, 316)
Duplex SS
Bronze
Al. |
|
| The centrifugal multistage horizontal pumps of series TM are used in irrigation systems, systems of high pressure lifting, refrigeration, heating, snowing, cleaning, in boiler systems, in condensed extraction and in fire-fighting systems. |
|
The MSL, MSM and MSV range the axial thrust is balanced by a newly designed and patented drum system that does not need tight, wear-sensitive running clearances to efficiently control re-circulation flow in the balance line.
The MSM range is designed for high pressure applications and the axial thrust is balanced by the combination of the drum and disc.
PERFORMANCE
• Capacity - max. 250 m3/h
• Head - max. 630 m
• Speed - max. 3600 rpm
• Temperature -10°C to 180°C (Optional 200°C )
• Pressure rating - max. 63 bar
The SIHI Multi range have optional design features available including: various nozzle positions, choice of shaft sealings, a stage reduction capability, a balance disc lift- off capability and inboard and outbord anti-friction bearings.
MORE ... FOR LESS ...
• Reduced life-cycle costs
- enhanced efficiency & innovative axial thrust balancing
- only one shaft seal
- lower power consumption
- high reliability
• Ease of maintenance
- simple dismantling and assembly
- meets technical requirements of ISO 5199 / EN 25199
• Minimised wear
- reduced usage of spare parts costs
• Global service network
- established local Service Centres around the world |
|
Designed for re-circulating service in reverse osmosis and other membrane systems, the 200MS Series multistage pumps offer lower start-up and run costs due to the high efficiency, two impeller design. These pumps produce a smooth, constant flow rate that reduces RO membrane fouling. They include many of the features of the 200 Series pumps, including strong investment cast impellers, low NPSH requirements and tighter running clearances.
- Rated up to 1250 psi maximum pump casing pressure
when pumps are placed in series
- Maximum differential pressure 250 psi (based on water)
- Sanitary 3A construction for food and dairy processing;
wet ends 316L stainless steel
- Low NPSHR investment cast impeller features 5 bladed,
open design for easy CIP and gentle product handling
- Heavy duty cast iron bearing frame keeps shaft rigid and
concentric for long seal and bearing life
-Balanced, water flush, double shaft seal standard |
|
High-pressure multi-stage centrifugal pumps and membrane element housings from GE Water & Process Technologies are more than durable components. They are precision-engineered elements that play a critical role in customers' treatment systems.
Our ruggedly built multi-stage pumps meet your requirements for general water applications, high-temperature performance, chemical compatibility, or quiet operation. Because our pumps set industry standards for reliability and low overall lifecycle costs, you can let them work without having to worry. GE's world-class pumps come with stainless steel shells on every pump and options for NorylTM impellers or stainless steel impellers. |
|
Multistage centrifugal pump with radial impellers. Suitable for installation into the wells. Reliability in operation and high efficiency. Discharge connection is designed under or above the base plate.
Available materials:
Cast Iron (Gray, Ductile)
Cast steel
SS (AISI 304, 316)
Duplex SS
Bronze
Technical Data:
Capacity Up to 100 l/sec
Head Up to 330 m
Temperature Up to 90°C |
|
| Compact multistage vertical electric pumps, suitable for lifting installations with or without autoclaves, fire-fighting installations, irrigation systems and wherever elevated pressures are required. |
|
| Vertical multistage centrifugal pumps for delivery of clean or slightly polluted liquids. Cantilever construction. Designed for tank installation. Immersion depth up to 800mm. Main fields of application: environmental protection technology, surface technic, filtration technic, coolant supply and as booster pumps. Synthetic versions for aggressive chemicals. |
|
| The Verdermag VMD is a very compact, magnetic driven centrifugal pump used in the lower flow segments in the process industry, as well as photo chemicals preparation. The VMD pumps are excellent small centrifugal pumps to build in industrial equipment and industrial machines. VMD directly coupled pumps are often used in OEM applications, such as metal plating, parts washing and pharmaceuticals. |
|
BCP Petrol pumps are centrifugal, self priming horizontal pumps.They are assigned for transport of all kinds of petrol and naphta. They also could be used for transport of ammonia, benzol etc.
BCP pumps are designed as single stage and multistage. They can be driven by electric drive on the same base plate. Self priming of the pump is made possible by means of a vacuum rotor which is enclosed in the pump.
With the transport of easily evaporable fluids, the conditions for cavity appearance are convenient. In due of it, a "cavity rotor" is build in the pump, protecting the pump from cavity. In cases when the pipeline operation stops, the overflow valve enables continuation of the pump operation for a certain period, without switching the motor off. The circular fluid flow duration depends on the fluid temperature, which must not exceed 60C.
Technical data:
Capacity Up to 50 l/sec
HeadUp to 200 m
The main field of application for these category of pumps is for loading and discharging of tankers and lorry tanks, rafinery process pump, petrol storage tanks.
|
|
Many decades of experience are incorporated in the centrifugal pumps from Lutz-Jesco. Special varnish layers and highly resistant materials guarantee highest reliability and long service life, even with most aggressive media. The product range includes motor pump units as well as standard pumps for many possible fields of application.
The chemical centrifugal pumps form Lutz-Jesco have been developed particularly to be used for industrial applications and are thus espcially sturdy and have a long service life - also in the case of most aggressive media and high-duty operation.
Chemical motor pump units BN are single-stage, normal-priming pumps with horizontal axis. They are supplied completely with motor for a fast and easy installation into the piping system. Suitable for capacities of up to 100m3/h. |
|
Thermoplastic vertical centrifugal pumps conceived for industrial applications, production lines and ecological facilities where resistance to chemical aggression must be coupled with reliability and easy maintenance.
Their particular construction eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity with the standards in force. The adoption of pumps with these characteristics eliminates, even in case of breaks, hazardous leaks and the need for openings on the bottom of the basins or tanks, allowing the absolutely safe pumping of chemical substances. |
|
| Centrifugal chemical pumps moulded in pure thermoplastic material with many executions to offer different applications for pumping chemicals in the most efficient way. Innovation thanks to stainless steel use in the pump body as reinforcement. The stainless steel is also used for the coupling guard and the base plate all according to the ISO norms. The employed material and external structures are identical for the whole project Frontiera. The inside solutions and type of motor connection are different. These pumps can be sealless or sealed; close coupled or long coupled executions. |
|
|
|
Centrifugal pumps
