|
|
| Products 271 to 300 of 396 |
Operating Limits:
-Max.suction head:9m
-Max.liquid temperature:60°C
-Max.environment temperature:40°C
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class B/F
-Protection IP44
Material:
-Pump body: Stainless Steel
-Impeller: Brass/Noryl/Stainless Steel
-Motor Shaft: Hi-Cr plated 45# Steel/2Cr13# Stainless Steel/S.S#304 Welding shaft
-Mechanical seal: Ceramic/Graphite
Application:
·Stainless steel pump body self-priming pumps suitable for gardening, water supply, washing, increase water pressure, etc. It is usually can be combined with a pressure switch and a surge tank to be used as a Domestic Water System for distributing water.
|
|
Operating Limits:
-Max.working pressure : 10 bar
-Fluid temperature up to 35°C
-Maximum ambient temperature 40°C
-Total suction lift up to 8 mt.
Motor:
-Insulation Class B
-Protection IP54
Materials:
-Pump body: Stainless Steel
-Impeller: Noryl
-Motor shaft: Hi-Cr plated 45# Steel/Stainless Steel
-Pressure tank: 19L or 24L
Application:
Automatic high pressure groups coupled with selfpriming jet inox pumps.
They are very silent and reliable and particularly suitable to increase pressure from a water system, to supply water from wells and in domestic high pressure groups.
|
|
Operating Limits:
-Max. fluid temperature from +5°C~60°C
-Max. ambient temperature up to 50°C
-Max. working pressure: 2.5Bar
Material:
-Pump body and diffuser in glass loaded Polypropilen
-Impeller in glass loaded Noryl
-Motor shaft in AISI 1045
-Mechanical seal in graphite and ceramic
-Motor housing and pump support in aluminium L-2521
-Windings impregnated with epoxy resin
Motor:
-2-pole induction motor
-Built-in thermal protection
-Insulation class B
-Protection IPX5
-Continuous duty
Application:
·This self-priming electric pump is designed for clean or slightly dirty water with suspended solids. It is suitable for swimming pool filtration system, etc.
|
|
|
|
|
|
The Autoprime range of AC, L, PM and PE general purpose pumps offer the advantage of the lower cost package but with the opportunity to pick and choose the level of technology that is required.
The AC (Air Cooled) L (Long Coupled) ranges are the traditional range that has been in use for many years in many applications. The range offers a slightly higher head capability than the PM/PE range. Pumps sizes from 2" (50mm) to 8" (200mm).
The PM series range brings in more efficient pump ends with a higher flow capability than the L Series and elongated solids handling capability. Fitted with a mechanical priming system identical to the L Series but with the added benefit of the low emission coalescer and higher capacity vacuum pump used on the Q-Series range.
The PE series takes the technology a stage further in addition to those benefits experienced with the PM range there is the added bonus of the electric priming system that senses when the pump is primed saving on fuel costs and wear & tear. The PE priming system is identical to that used on SPP's award winning Q-Series.
|
|
Serie SMD
Self priming mag drive pumps with dry running capability
Gas-liquid separation system
These pumps are capable to self-prime the liquid up to 4 m within 3 minutes. The gas-liquid separation system ensures the repeating self-priming operation without check valve.
Pin-point contact system (Pat.)
This pin-point contact system is already proved in the MDH series and gives the pump a better resistance against dry runnung and cavitation. Besides the pumps are more reliable in comparison with conventional self-priming pumps.
|
|
|
Vanton heavy duty self-priming thermoplastic pumps are ideal for use on mobile acid buggies, for sump and tank evacuation and emergency overload pumping. They are often specified for in-line service where low headroom precludes the use of vertical pumps, and in other applications where rapid self-priming from depths to 15 feet is required. Available in PP & PVDF homogeneous thermoplastics, they are recommended for the handling of corrosive, abrasive, hazardous, toxic and other aggressive fluids.
|
|
Goulds Trash Hog® is designed for superior solids handling capability, optimum pump performance and extreme ease of maintenance for a wide range of industrial, pulp and paper, mining and municipal wastewater services. Whether handling raw sewage, sludge, debris or plant wastes, there's no other pump that compares to the Trash Hog®.
Large Capacity Priming Chamber For reliable priming and repriming
Heavy Duty Power End For extended life in toughest services
Non-Clog Impeller Capable of passing spherical solids to 3 inches (76 mm)
External Impeller Adjustment Easily renews optimum hydraulic performance
Trimmable Impeller Permits most efficient use of motor horsepower
Capacities to 6000 GPM (1363 m3/h)
Heads to 140 feet (43 m)
Temperatures to 225° F (107° C)
Pressures to 85 PSIG (586 kPa)
Suction Lifts to 25 feet (7.6 m)
Spherical Solids to 3 inches (76 mm)
|
|
NEXH
Industry: Process
BEACHES Of USE
Flows until 400m3/h total Heads until 150mCE
APPLICATIONS
A broad choice of materials makes it possible to meet specific needs in industry.
ADVANTAGES
- High efficiencies hydraulics and vibratory
- Many options
- High strength to the fluids aggressifs
|
|
The WEMCO Self-Primer is a rugged & dependable self-priming, solids handling, trash pump. A solids handling pump that is suitable for a wide range of applications. True solids handling pumps for tough jobs.
Features / Benefits
- Stainless steel 17-4 PH shaft.
- Cast steel impeller.
- Ductile iron casing and bearing.
- Ductile iron cover plate and fill port cover.
- No tools required for impeller adjustment.
- Shimless impeller clearance adjustment.
- Passes stated solids.
- BuzzSaw Self-Cleaning Wear Plate
- Higher actual efficiency.
- Solid silicone carbide seal faces.
- More rugged and dependable.
- Better value.
- Lower life cyle cost.
- Market leading 66 month warranty.
- Enhanced safety features.
- Higher operating pressure.
- Directly interchangeable - pumps and parts
|
|
|
Horizontal plastic Centrifugal self-priming Pump for general application Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system Alumina ultra pure 99,7% shaft, PTFEC Brgs Close Coupled execution
|
|
ETN-SP SERIES
TECHNICAL SPECIFICATIONS
Materials PP/PCV-CAW
Flow rate 25 mc/h
Head 30 m
Temperature range 0 °C - 50 °C
Allowable pressure rating PN 6 (20°C)
Impeller type Chiusa
Motors 0.75 - 7,5 Kw
Max suction lift - 6 m
Pass solids not allowed
Inlet outlet UNI PN 16 RF
|
|
|
|
|
|
Pumps autoamorçantes with side channel:
- EX: version stainless 316L
- EZ: version Cast iron
Pump EX:
Fluids: lights and/or corrodents like the acids, solvents or foams, fluids dyphasic...
Débit : up to 22 m3/h
Height mano. : jusqu'à 180 mCE
Beach of temperature: -60 to 250 °C
Operating pressure max: 10 and 16 bars
DNN: 12 to 50 mm
Viscosity max: 300 cST
Pump EZ:
Fluids: lights, hydrocarbons, solvents, viscous fluids until 300cST...
Débit : up to 20 m3/h
Height mano. : jusqu'à 120 mCE
Beach of temperature: -30 to 180 °C
Operating pressure max: 10 and 16 bars
DNN: 12 to 50 mm
Viscosity max: 300 cST
APPLICATIONS
Important suction head, difficulty or risk of draining
Discharge, taking away and transfer of chemical fluids in fields of chemistry, petrochemistry, pharmacy, the nuclear power...
Mobile or fixed groups of discharge for various products, food of loops of distribution, equipment of machines with automatic cycle with reversible operation, injection of reagents for water treatment...
ADVANTAGES
- Aspiration up to 8,5 mCE.
- Low number of revolutions
(1450 rpm EX-EZ 12,20,32,40,50)
- Strong total head
(2900 rpm EX-EZ 12,19)
- Compactness
- Reversible
- Interchangeable standardized Engine
- In option, magnetic coupler on pump EX
|
|
This extensive range of side-channel pumps are available in various designs including:- Horizontal or vertical, self-priming and some of a segmental construction.
The pumps are able to handle entrained gases and liquids which in some cases contain solid or abrasive matter.
PERFORMANCE
- capacity up to 35 m3/h.
- delivery head up to 354 m
FEATURES & BENEFITS
- self –priming.
- gas handling.
- performance curve characteristics.
- pumping liquids under critical physical
- high wear-resitant materials
- high efficiency
- low NPSHR value
- modular hydraulic system
|
|
Pumped Liquid
Acids, bases, carbohydrates, processing water
Main Fields Of Application
For heavy-duty service in the chemical industry and process engineering, systems and apparatus engineering; according to standards DIN EN 734
|
|
|
|
|
|
General
Magnetic coupled DICKOW-Pumps of series HZSM / HZSMA are of sealles design. the containment shell forms a closed system with hermetically sealed liquid end. The properties of the integrated side channel stage allows the handling of entrained gas and operation under suction lift conditions.
Applications
Magnetic driven HZSM / HZSMA-pumps are designed to improve plant and personnel safety, especially when handling toxic, expolsive or other dangerous liquids which react on contact with the atmosphere. For all these sevices the containment shell replaces double acting mechanical seals with external fluid reservoirs and the necessary control equipment. HZSM / HZSMA-pumps therefore offer exceptional benefits to the chemical, petrochemical and allied industries and fulfill all environment protection rules.
Due to the fact that 90% of pump failures are caused by leaking shaft seals, the sealless design increases the availability and reduces maintenance costs.
The HZSM-type is used in tank farms, for offloading rail cars and trucks, filling of storage tanks and other applications where priming of empty suction pipes is required.
Considering low NPSH-values, gas handling capability and sealless design, the HZSMA-type offers special benefits to liquified gas applications. Typical application is filling of LPG-trucks and rail cars in refineries.
|
|
Features
* Gland packed / Mechanical seal
* 50HZ / 60 HZ availability
Applications
* Water supply
* Air-conditioning
* Power plants
* Mine drainage
* Irrigation
* Fire fighting
Range
* Delivery size up to 150 mm
* Capacity up to 470 m³ /hr
* Head up to 180 metres
* Temperature (-) 10 degree C to 90 degree C
|
|
Series 410 - Horizontal Single Stage Split Case Pumps
The horizontal split case pump has long and properly been used for the handling of liquids where the utmost in reliability and accessibility are paramount. Billions of gallons of liquid have been pumped by split case double suction pumps and billions more will be pumped condsidering the rapid industrial, agricultural and commercial expansion. The Aurora 410 Series pumps make a significant contribution to the customer requirements for pumps on this type of service.
Feaures:
- Capacities to 15000 G.P.M (3407 M3/HR)
- Heads to 500 feet (152 Meters)
- Temperatures to 275°F (135°C)
Applications:
- Cooling, Heating and Air Conditioning Service
- Boiler Feed Service
- Condensate Service
- High Pressure Water Service
|
|
Characteristics
¡Single horizontal centrifugal pump.
¡Horizontally split casing, double volute (HSC pumps and some HSR's) minimizes thrust loads and allow operation over a wide range of capacities.
¡Flanged connections.
¡Enclosed impellers, double suction provides hydraulic balance eliminating axial thrust.
¡Clockwise or counter clockwise rotation.
Design Features
¡Oil lubricated bearings for HSC & HSR.
¡Stuffing box allows for mechanical seal.
Standard Construction Materials
¡Cast Iron.
¡Cast Iron, Stainless Steel Fitted.
¡All Bronze.
¡All WCB grade Carbon Steel.
¡All Stainless Steel.
Operation Limits
¡Capacity to 14318 m3/hr (63000 U.S. gpm).
¡Head to 340 m (1115 ft).
¡Pressure to 28 kg/cm2 (400 psi).
¡Temperature 10%u2039C to 150%u2039C (50%u2039F to 300%u2039F).
Applications
¡Fire Service.
¡Cooling Towers.
¡Municipal.
¡Oil Process.
¡Petrochemical.
¡Sugar Industry.
¡Paper Industry.
¡Pipeline.
¡Power Plants.
¡Others.
Ruhrpumpen Nomenclature
¡HSC
¡HSD
¡HSR
¡ZM
|
|
Fields of application:
Conveyance of stock suspensions with a consistency of up to 2% in the pulp and paper industry:
• Headbox pumps
• Cleaner pumps to headbox
• White water pumps
• Water distribution
The facts
• Capacities up to 20,000 m3/h
• Up to 110 m delivery head
• Drive power up to 7,000 KW
• Range: 0.7-1.2 Qopt
|
|
|
SPP's Lowest Life-cycle Cost Series of Horizontal Split Casing pumps have been specifically developed to meet the requirements of the 21st century pump user. The best of SPP's existing, well-proven designs, have been fine tuned with the aid of three-dimensional computational fluid dynamics, to attain the optimum performance minimising power consumption and internal re-circulation.
|
|
|
Stainless steel (316) centrifugal pumps are designed to provide years of reliable service. A wide variety of port sizes, impeller diameters and seal options make AC Series horizontal centrifugal pumps extremely versatile.
|
|
Operating Limits:
-Liquid temperature:
-Normal temperature type:-15°C?+70°C
-Hot water type: +70 °C?+100°C
-Max. ambient temperature:+40°C
-Max. operation pressure:10 bar
-Max. inlet pressure is limited by max. operation pressure
-Continuous duty
Motor:
-Two-Pole induction motor(n=2900r.p.m.)
-Insulation Class F
-Protection IP55
Material:
-Pump body: Cast Iron
-Impeller: Stainless Steel
-Motor Shaft: Stainless Steel
-Mechanical seal:NBR/Ceramic/Carbon
Application:
·Mainly used in industrial field:
·Air-conditioning system
·Cooling system
·Industrial cleaning
·Water treatment(Water purification)
·Aquiculture
·Fertilizing/metering system
·Environmental application
·Other special applications
|
|
|
|
|
|
The 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths because it is hydraulically formed rather than stamped. It is applied in general industrial services in which low to moderate flows are required with low to moderate heads.
* Applications:
Pharmaceuticals,OEM,Scrubbers,Ultrapure Water,Car Wash,Beverage Processing,Washing Systems,Cooling Water,General Purpose,Water Supply,Water Treatment,HVAC,Industrial Plant Services,Irrigation,Jockey Pump Services,Pressure Boosting
* Industries:
Automotive and Aircraft,OEM,Wastewater Collection and Treatment,Water Treatment
* Standards:
* Misc:
Hydraulically Formed rather than stamped, the 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths.
Close Coupled design saves space and simplifies maintenance and installation.
Stainless Steel Liquid End Components offer high quality and corrosion resistance.
Special Mechanical Shaft Seals and O-rings are available for high
|
|
The 304L stainless steel SFX pump has a true volute with fewer welded parts, fewer rust points, and fewer potential leak paths because it is hydraulically formed rather than stamped. It is applied in general industrial services in which low to moderate flows are required with low to moderate heads.
* Flows to 85 m3/h (380 gpm)
* Heads to 85 m (280 ft)
|
|
|
|
|
|
APPLICATIONS
Recircling plants, heating, air conditioning, heat recovery, plants of water supply procurement, pressurising units and fire-fighting systems.
CHARACTERISTICS
Hydraulics: pump body with dimension and performances according to EN 733 rules, closed impeller dynamically balanced and with balance holes for the for the balancing of the axial thrust. Shaft completely in stainless steel, greased ball bearings, flanges (UNI EN 1092-2): up to DN 150: PN16, from DN 200:PN10.
Mechanical seal; see page 152, special seals on request.
For constructive materials, please, refer to page 6.
Motor: asynchronous with 2 or 4 poles and with external ventilation.
Protection: IP55
Insulation: class F
Standard tensions: 220-240V up to 4 kW, 380-415V / 660- 720V starting from 5,5 kW.
Frequency: 50 Hz
Available in three different metallurgies: Cast iron, Stainless steel AISI 316, Bronze
SPECIFICATIONS
DN aspiration: from 50 up to 100 (150 for IR4P) –
DN delivery: from 32 up to 80 (125 for IR4P).
Qmax: 275 m3/h @ 2900 1/min • 400 m3/h @ 1450 1/min
Hmax: 100 m @ 2900 1/min • 43 m @ 1450 1/min
Temperature of the pumped liquid: from -15°C up to +120°C
Max operation pressure (see table at page 4 of the catalogue)
Max environment temperature: 40°C (for higher temperature, please, verify).
|
|
Single-stage vertical centrifugal pumps, suitable for transfer, recycling and distributing corrosive liquids and chemicals. The AS-series pumps are recommended for installation in cisterns, tanks or wells with variable head.
Materials: PP, PVC, PVDF, PE-HD.
Up to 3 meters long, depending upon the tank depth.
Suitable dimensioning of shafts, support columns and motor supports.
Nozzles with hose adaptor threaded or flanged.
Free of bearing bracket or intermediate bearings, it is guided by a pair of filled PTFE, ceramic or SiC wear bushings, and flushed by the liquid being pumped.
|
|
|
The vertical centrifugal pumps made in resin are high efficiency pumps for fixed installations with the pump immersed directly in a tank, operated by an electric motor in direct drive (max. 3000 rpm) for rapid emptying of fluid, with a flow rate of from 16 to 55 m3/hour. The particular form of construction of this pump, in addition to not using internal mechanical seals (subject to high wear), guarantees that any accidental leakage of the fluid is collected in the tank. The open rotor allows very dirty fluids, with an apparent viscosity of up to 500 cps (at 20°C) and small sized suspended solids, to be pumped with a continuous flow. The choice of the pump's composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without forgetting the correct temperature field.
|
|
|
With high delivery rates and heads, FLUX centrifugal immersion pumps combine maximum efficiency with a robust and reliable construction, resulting in a pump that provides the ultimate in process security, especially for transferring corrosive or abrasive fluids. Main fields of application are the chemical industry, chemical engineering, electroplating, PCB manufacturing, fresh and waste water treatment.
|
|
Goulds Model 3910 API 610 (OH3) vertical in-line pump provides benefits of low installation costs and space savings...without compromising reliability, maintainability, safety or hydraulic performance.
Back Pull-out for ease of maintenance.
Bearing Frame carries pump loads.
FramehookTM allows safe and easy removal of back pull-out assembly (patented).
Standard Spacer Couplings used for all applications.
In-Line Design for space and cost savings.
Motor Support Rugged fabricated steel, maintains positive shaft alignment. Available motor support. Unique frame-mounted motor support improves maintenance access.
Capacities to 7500 GPM (1700 m3/h)
Heads to 750 feet (229 m)
Temperatures to 650° F (343° C)
Pressures from full vacuum to 595 PSIG (41 bar)
|
|
Everything at Lutz revolves around safety and environment protection. Our centrifugal pumps guarantee the safe transfer of aggressive, corrosive and other hazardous acids and bases.
Lutz centrifugal pumps B50, B6 and B80 are particulary suited for the electroplating industry, waste water treatment, chemical industry, water conditioning and gas scrubbers.
The different sizes, types and material combinations of the vertical submerged pumps provide the range needed to cover all applications.
- Delivery rate up to 160 m³/h
- Delivery head up to 65 m
- Immersion depths up to 3000 mm
- Mousing materials: PP, PVDF, PVC or Stainless Steel
|
|
|
|
Centrifugal pumps
