|
|
| Products 91 to 120 of 396 |
Materials: PP, PVC, PDVF, PE-HD
Flow rates up to 150 m³/h, heads up to 60 m w.c.
Steel nuts, bolts and shafts covered with the same material used for the pump
Sliding parts flushed by the pumped liquid
PVC support plates and base plates, in standard or specified sizes
Nozzles connections: hose adapter, flange or thread
|
|
Stainless Steel Horizontal Pumps
Application:
Sethco compact stainless steel horizontal centrifugal pumps are ideally suited to a wide range of chemical, laboratory and processing applications. Precision built, they offer excellent resistance to corrosive liquids.
Specifications:
* 5 models from 12 to 105 GPM
* Handles temperatures to 210° F
|
|
|
Is suitable forto pull out delivers 80 "C below to include thetextile fiber or other suspensions liquids, forthe city, the industryand mining, the enterprise, discharges ships the sewage, the excrement, but also may pull out delivers some aquatic products and soon. When the transportation acidity and the alkalinity and include the multi-salty share other can cause the corrosion chemistry mixtureliquid the ordering to have to indicate, the factory may supply the corrosion preventing material quality to pump an assembly pumping. PWis the horizontal pump, PWL is a vertical pump.
|
|
|
|
|
|
Compact and adaptable to many applications, March Series 2 pumps can deliver a maximum flow of 5.5 GPM (18.5 LPM) and handle a maximum head of up to 13.5 ft. (2.7 m) (32 ft. [12 m] when driven by an air motor). Typical
applications include etching equipment, photographic and graphic arts processing equipment, garden fountains, ice flakers, plate processors and marine air conditioning. Maximum recommended fluid temperatures are 190º F
(87º C) for open-air models, or 130º F (54º C) for submersible models.
Series 2 pumps are available in both open air and epoxy clad submersible models with a variety of options in both materials of construction and inlet and discharge ports. Options for wetted materials include polypropylene, Noryl®, nylon, Buna N rubber and 316 stainless steel. Blast-cooled models have a polypropylene encased impeller magnet. Most models feature Buna N rubber “O”
rings. Inlet options are 3/8" FPT, 3/4" MPT or 3/4" (19mm) O.D. smooth, while outlets are offered as 1/4’’ MPT and 1/2" (12.7mm) O.D. smooth.
|
|
Single stage, double suction pumps designed for a wide range of industrial, municipal, and marine services.
Models 3408 & 3410 - Small capacity (Flows to 8,000 GPM / 1,817 m3/hr)
Model 3409 - Medium capacity (Flows to 12,000 GPM / 2,725 m3/hr)
Model 3420 - Large capacity (Flows to 65,000 GPM /14,762 m3/hr)
Model 3498 - Extra Large capacity (Flows to 225,000 GPM / 51,098 m3/hr)
|
|
Size: ¥õ200 ~ ¥õ1,800 mm
Capacity: 100 ~ 28,000m3/h
Major Applications
- Water Intake Pump, Circulating Pump
- District Heating Pump
- Feed Water Booster Pump
- General Industries
|
|
Pump components geometry optimised through hydraulic, structural, thermal and dynamic F.E.M. analysis lead to an high product reliability.
Ample balancing line from 2nd. stage to suction maintain stuffing box pressures within limits easily acceptable by any type of balanced mechanical seals.
New centerline casing mounting for high temperature stability.
Rotor operates away it’s critical speeds.
Deep stuffing boxes designed in accordance to API 682 Std., suitable to accept any type of mechanical or packing seals.
Axial split bearing housing for easy inspection and maintenance procedure.
Labyrinths and deflectors at either bearing housing to maximise protection against dirt.
A wide range of sizes and material combinations complete the variety of the offered product.
|
|
Goulds Model 3620 API 610 (BB2) between bearings radially split double suction process pumps are designed for smooth, reliable operation.
Goulds has extended the hydraulic coverage on its Model 3620 process pumps. These new hydraulics augment existing hydraulics, extending the Model 3620 hydraulic coverage. The new performance curves can be accessed through the Pump Selection System (PSS).
Specifications:
Capacities to 20,000 GPM (4540 m3/h)
Heads to 1500 feet (455m)
Temperatures to 850° F (455° C)
Pressures from full vacuum to 1000 PSIG (6895 kPa)
|
|
Features and Applications
The EHR series slurry pumps are cantilevered, horizontal, centrifugal slurry pumps. They are designed for the handling of highly abrasive, high density slurries in the metallurgical, mining, coal, power, construction material and many other industries. The pumps of this series can be installed in multistage series.
The frame plates for the EHM series have replaceable wear-resistant metal liners. The EHR series have replaceable wear-resistant rubber liners. The impellers are made of rubber for the EHR series. The shaft seals of the EHR series may adopt shaft gland seal or expeller seal. The discharge branch can be oriented to any of the eight different positions
Notation
EHR-4D
E: Excellence
H: High concentration
R: Rubber lined
4: Discharge size (inch)
D: Frame type with maximum power
|
|
Elastomer Lined Slurry pumps available in close coupled and XT models featuring extra thick liners. Elastomers available include rubber, neoprene and ceramic rod media for severe duty.
Specifications:
Capacities up to 20,000 GPM (4542 m3/h)
Heads to 164 feet (50 m)
Temperatures to 250° F (121° C)
Pressures to 400 PSIG (2758 kPa)
Solids to 1/8"(3mm)
Design Features:
Field Replaceable Rubber Liners Bolt in for quicker replacement, extra thick for extended wear life
Large Diameter Impeller for lower operating speeds, longer wear life
Five Discharge Positions suitable for most discharge pipe arrangements
Oil Lubricated Bearings for maximum bearing life.
Sealing Flexibility Choice of packing arrangements, mechanical seals.
|
|
|
|
|
|
Goulds model 3700 API 610 (OH2) (ISO 13709) centerlined mounted process pump designed for optimum reliability. The Goulds 3700 employs state-of-the-art mechanical design features for sustained reliability and performance.
Specifications:
Capacities to 6500 GPM (1475 m3/h)
Heads to 1150 feet (350 m)
Temperatures to 800° F (427° C)
Pressures from full vacuum to 870 PSIG (6 MPa)
Design Features:
API-610 - Full compliance with 10th Edition.
Tangential Discharge - Maximum hydraulic efficiency.
Finned Bearing Frame - Accommodates high temperatures without need for cooling water.
Seal Chamber - Meets dimensional requirements of API-610 and API-682.
Bearings and Seal Chamber Cooling - For extremely high temperature services.
Mechanical Design - Extra heavy shaft and bearings.
Back Pull-out Construction - Designed for one craft maintenance.
Dual Volute Casings - 3-inch discharge and larger.
Impeller - Multiple closed impellers for most casing sizes.
Centerline Support - High temperature stability.
|
|
Features
* Back pullout type
* Suction lift up to 8 metres
* Easy maintenance and spares availability
* Grease lubricated deep groove ball bearings
Applications
* Irrigation
* Industries, for clear water handling
* Water supply for domestic use
Range
* Delivery size up to 100 mm
* Capacity up to 125 m3 /hr
* Head up to 23 metres
* Power rating 5.9 kW (8 hp)
|
|
Features
* Conforming to DIN 24256, ISO 2858
* Back pull-out design
* Gland Packed / Mechanical Seal
* 50 Hz / 60 Hz availability
Applications
* Booster Service
* Fire fighting
* Air-conditioning
Range
* Delivery size up to 200 mm
* Capacity up to 750 m³ /hr
* Head up to 150 metres
* Temperature (-) 30 degree C to 90 degree C
|
|
3340 Series Single Stage End Suction Pumps
Liquid handling requirements are much more involved than they were five years ago. The variety of liquids being handled has increased along with temperatures and pressures. Today’s installations demand quiet, smooth running pumps with long life. Aurora Pump’s 85 years of experience with design, sales and manufacturing of centrifugal pumps has lead to the 3340 Series. These modern pumps with a clean, straightforward design were developed with maximum interchangeability in mind. Aurora’s highly reliable 3340 pumps offer an economical solution to your liquid handling problems.
- Capacities to 4200 G.P.M. (800 M3/HR)
- Heads to 520 Feet (180 Meters)
- Temperatures to 225°F (107°C)
|
|
Construction
- Single-stage end-suction centrifugal pumps, with bearing bracket.
- Nominal duty points and main dimensions in accordance with EN 733.
- Back Pull-Out construction, for simple and quick dismantling and reassembly.
- Rated speed of rotation (50 Hz): N = 2900 1/min. N4 = 1450 1/min.
- B-N, B-N4: bronze version.
Applications
- For clean liquids, without abrasives, which are non-aggressive for the pump materials (contents of solids up to 0.2%).
- For water supply.
- For heating, air conditioning, cooling and circulation plants.
- For civil and industrial applications and for agriculture.
- For fire fighting applications.
- For irrigation.
|
|
Gorman-Rupp 60 Series pumps are standard centrifugal, high pressure, high volume pumps with exceptional efficiencies (up to 85%). Discharge on many models can be placed in any position by turning the pump casing.
Specifications
Size: 3" (75 mm), 4" (100 mm), 5" (125 mm), 6" (150 mm), 8" (200 mm), 10" (250 mm), 12" (300 mm)
Max Capacity: 6,800 GPM (429 lps)
Max Head: 500' (152 m)
Max Solids: 3" (76 mm)
Max Temperature: 160 F (71 C)
Materials of Construction: Cast Iron, Cast Steel, Ductile Iron
|
|
|
|
|
|
Griswold’s E,F&G centrifugal pumps are designed for versatility! With capacities up to 3000 GPM, heads to 310 ft., a broad range of sizes and configuration options and extensive performance features, the E,F&G Series proves ideal for most water pumping applications.
E,F&Gs are equipped with your choice of either close-coupled NEMA electric motors or frame mounted with coupling to electric motors, engines, steam turbines or even belt-driven options. The E,F&G’s 360º mounting capabilities greatly extend installation options. Close-coupled configurations can be mounted vertically when space is at a premium. The E,F&G’s back pull-out design permits removal of the pump assembly for easy maintenance without disturbing pipe connections. All E,F&G models are flanged in accordance with ANSI B 16.1 for 125 PSI applications.
In addition to the wide variety of options and upgrades available to configure the Series for your specific application, all E,F&G pumps are engineered for performance, long life and easy maintenance with standard features such as:
|
|
End Suction Magnetic Drive Seal-less Centrifugal Pumps
Designed for Corrosive Liquid and Chemical Transfer
* Magnetic drive, sealless design for leakproof, trouble-free operation.
* Designed to pump acids, alkalies, caustics, bleaches, sea water, solvents and other harsh liquids.
* Powerful magnets drive the pump to deliver up to 225 GPM/105 FT. TDH.
* Stainless steel exterior hardware.
* Handles temperatures to 220°F (99 C).
* Corrosion resistant, fan cooled motors.
* Twin impeller design for high volume circulation and leakproof operation.
* High strength molded pump body for vibration free operation annd extended pump life.
* Easy maintenance.
* Ideal for OEM applications.
* Made in U.S.A.
|
|
|
|
|
|
SCHMITT-Centrifugal Pumps
U range: Standard suction pumps
The impellers of the pumps in this range are shaft-driven. Internal slide rings provide effective sealing for the shaft passage.
This series can also be equipped with a double-action mechanical seal, (type U-DO). The double-action mechanical seal requires a sealing fluid to be supplied.
These models are available with a choice of electric drive motors: three-phase or single- phase and three-phase explosion protection or flameproof enclosure drives. All drives can be adapted to work off any voltage or frequency.
The characteristic curves of these models have been measured using three-phase double pole 50 Hz motors, with water as a test medium, at a temperature of 20°C.
Advantages:
- Universally adaptable
- Unaffected by contamination of the fluid medium by magnetic particles
- Suitable for the transmission of viscous media
Some uses and applications:
- Salt water applications and aquaria
- Textile industry
- Cleaning processes
- Photographic development
- Electro-chemical industry
|
|
SCHMITT-Centrifugal Pumps
UP range: Standard suction pumps
All parts in contact with the transmitted medium are manufactured from stainless steel (1.4581).
Suitable for the transmission of media at temperatures of up to 150°C.
The impellers of the pumps in this range are shaft-driven. Internal slide rings provide effective sealing for the shaft passage. The mechanical seal in this range can be manufactured from a variety of different materials, depending on the conditions in which the seals are required to operate.
Advantages:
- Suitable for the transmission of hot and corrosive media
- Can be easily sterilized
Some uses and applications:
- Petroleum industry
- Paper manufacturing
- Food processing
- Fat extraction baths
- Heat exchangers
|
|
Features :
WIDE RANGE OF APPLICATIONS:
- General Pumping
- Chemicals
- Wash Systems
- Deionized Water
- Process
- OEM
CAPABILITIES:
- Capacities to 240 GPM
- Heads to 160 Feet TDH
- 1750 and 3500 RPM
- Back Pull-Out Construction
- Mechanical Seal
- Semi-Open Impeller
CONSTRUCTION:
- Cast Iron
- Bronze Fitted
- 316 Stainless Steel Fitted
- All 316 Stainless Steel
|
|
|
Cast Iron and Bronze construction in both self priming and standard configurations. Close coupled, frame mounted and SAE engine drive options available. Flows up to 5,000 GPM and 400 feet TDH. Designed to handle a wide range of water and mild chemical applications.
|
|
The pump and driving motor are assembled as a unit on a common shaft. The transformer oil circulates through the windings thus eliminating any shaft seal and avoiding the danger of oil leakage or entry of air. The complete unit is weatherproof and can be arranged for horizontal or vertical mounting with a variety of branch positions on end suction and side outlet.
The end suction design is selected to meet specific customer duty requirements. All pumps supplied are performance tested and statically tested at 5 Bar in hot oil at 60º C for 24 hours to prove joint integrity.
|
|
SPP Pumps have been manufacturing fire pumps for over 100 years and has one of the widest ranges of approvals of any manufacturer in the world. Experience gained from extreme environments such as off-shore oil & gas installations has led to the creation of the SPP Unistream and Eurostream range of end-suction fire pumps, approved for fire protection by the Loss Prevention Certification Board (LPCB), Factory Mutual Approvals
(FM) and Underwriter Laboratories Inc. (UL), all of which are fully compliant to NFPA 20. Other approvals held by SPP include APSAD, CNBOP, ZUS and PSB.
Typical Applications:
Sprinkler systems
Hydrant systems
Deluge systems
Monitor systems
Water curtain
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
|
Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.
|
|
|
These pumps are identical in performance, differing only in flange and discharge size. Optional mounting accessories are available for BSW/CSW pumps. When ordering specify either BSW or CSW flange.
|
|
Goulds Model 5500 is the result of many years of experience designing and building severe duty slurry pumps. It's not only built to stand up to the toughest abrasive slurry services, but also is designed for extreme ease of maintenance and safety. A heavy duty bearing frame and shaft, extra thick wall sections and easily replaceable wear parts add up to many years of service even under the severest operating conditions. Also available as 5500HP.
Specifications:
Capacities to 17000 GPM (3861 m3/h)
Heads to 425 feet (139m)
Temperatures to 250° F (121° C)
Pressures to 500 PSIG (3448 kPa)
Solids to 5 inches (127 mm)
|
|
|
|
|
|
General
The DICKOW-pumps, type NCR, are heavy duty centrifugal pumps for petroleum, petrochemical and natural gas industries. The pumps are designed and manufactured according to API 610, 9th ed. / ISO 13709. This international standard specifies requirements for centrifugal pumps used in the above industries.
The standard does not refer to any outline dimensions of the pumps.
Applications
The performance range of the NCR-pumps is subdivided such that acceptable efficiencies can be achieved for all service conditions.
The maximum capacity goes up to 700 m3/h (3100 USgpm). Differential head up to 145 mLC (480 ft) at 2900 rpm and 220 mLC (660 ft) at 3500 rpm.
With a wide selection of materials and the possibility to install all shaft sealing systems according to API 682, DICKOW-NCR-pumps are suitable to convey nearly all kinds of liquids which are usual in the above mentioned industries. E.g. acids, lyes, chlorinated hydrocarbons, heat transfer media (HTM), all kinds of hydrocarbon fuels, liquid sulphur, melted plastics, bitumen etc.
If the application requires sealless pumps, consider also our magnetic coupled PRM-pumps according to API 685.
|
|
ELEPUMP DIESEL
The Elepump is also available with a diesel engine, offering better fuel efficiency and lower overall operating cost. Based on customer feedback, the Diesel Elepump offers better overall operating efficiency.
Designed for simple maintenance, Elepump requires only periodic oil checks and changes - and worn parts can be replaced quickly and simply without special tools.
* 45 gallons per minute pumping capacity for large drill site operations that demand greater throughput
* Mounted on 4-cylinder Kubota V1305-40M transmission Offers 30 horse power at 3000 rpm
* Newage 40M 4-speed transmission with integral reduction, providing ratios of approximately 13:1, 9:1, 5:1 and 3:1
* Factory-specified completion kits include a 12V starter and charger, radiator-cooler with HD guard, HD dry-type air cleaner, keystart with glowplug assist, Vernier-type throttle control, a battery rack and cables, Racor fuel filter, electric fuel pump and chain-type coupling
* Battery not included
|
|
|
|
Centrifugal pumps
