|
|
Features and Applications
The EZG(S) series Slurry Pump is a type of large capacity, high head slurry pump which is ideally suited to remove ash & sludge and to deliver liquid-solids mixture. It can be installed in multistage series. It has wide passage, non-clogging and good performance of NPSH. Expeller seal combined with packing seal or mechanical seal is adopted to guarantee the low leakage of slurry. This series has ideal structure, high efficiency, long service life, high reliability, easy maintenance, and low cost of running.
The pump can be used for seawater ash-removing to prevent it from corrosion of seawater, salt and mist, and electrochemical corrosion. It is widely used for handling abrasive and corrosive slurry in electric power, metallurgy, mine, coal, construction material and chemical industry departments, especially for removing ash and sludge in electric power station.
Notation
EZG(S)-65
E:Excellence
Z:Slurry
G:High head
S:Run in series
65:Discharge size (mm)
|
|
Hypro centrifugal pumps handle big, high-capacity spraying jobs with ease. Use them for spraying liquid fertilizers and other chemicals, including wettable powder slurries for weed control. Make short work of other jobs - filling nurse tanks, watering seed beds, and transferring liquids.
Performance Information
- Max. flow rate: 150 gpm/568 lpm (free flow)
- Max. pressure: 140 psi/9.7 bar (Shut off)
- Max. fluid temperature: 140°F/60°C
|
|
Hypro self-priming centrifugal pumps handle big, high capacity, liquid transfer jobs with ease. Use them for transferring water, liquid fertilizers, and other chemicals compatible with pump materials.
Make short work of other jobs: filling nurse tanks, watering seedbeds, and transferring liquids.
|
|
Engine Driven Pumps
Hale offers a variety of engine driven pumps ranging from skid units to easy to use portable pumps.
Skid units come in several configurations such as:
Open Cross Mount units - ideal for installation on fire apparatus for wildland, ARFF or pump and roll applications.
Trailer units - Ideal for stand by fire protection where mobility is crucial.
Skids without manifolds - Ideal for permanently installed and stand-by fire protection.
Skids with Manifolds - Idea for permanently installed and stand-by fire protection.
Our portable units are available in floating, HP, and diesel configurations to fit every firefighting need.
|
|
Characteristics
- Single stage horizontal centrifugal pump.
- Horizontally split case.
- Flanged connections.
- Enclosed impellers, double suction provides hydraulic balance reducing axial thrust.
- Clockwise or counter clockwise rotation viewed from coupling side are available.
- Grease lubricated bearings.
Approvals
- Ruhrpumpen's Fire Pumps are listed by Underwriter's Laboratories Inc., and approved by Factory Mutual.
Operation Limits
- Capacity to 568 m3/hr (2,500 U.S. gpm).
- Head to 139 m (455 ft).
- Pressure to 14 kg/cm2 (197 psi).
- Temperature 10°C to 104°C (50°F to 220°F).
|
|
XBD-W horizontal type single stage and single absorbs fire pump
|
|
FIRE-FIGHTING UNIT MGA-DJ SERIES
Fire-fighting unit with diesel motor pump and a jockey electric pump.
|
|
|
|
|
|
Introduction:
With the development of the technology, our company has introduced the series EZJ slurry pump under the theory of modern fluid mechanics and mechanical, based on the software design and practical experiences.
The EZJ series slurry pumps are designed as single-stage, single-suction centrifugal pumps.They are classified into the horizontal version (EZJ type) and vertical version (EZJL type) according to mode of construction and the discharge diameters of horizontal pumps vary from 300mm to 200mm 150mm, 100mm, 80mm, 65mm, 50mm, 40mm, etc.And the discharge diameters of vertical pumps vary from 150mm to 100mm 80mm 65mm 50mm, etc.
The pumps are innovative in both hydraulic and structural designs.The wet parts are made from self-developed high-chrome alloy cast iron with high wear-resistance.They are of energy- saving, high efficiency, little vibration, low noise, long service, lightweight, reliable operation and easy maintenance.
Application:
The EZJ series slurry pumps are widely used in power, metallurgical, mining, coal and building materials, which are suitable for handling abrasive and corrosive solids-bearing slurries with maximum concentrations of wt.45% (ash) and wt.60% (ore) such as handling the fine ore and tailings in mining, removing ash and dredges in power plant and delivering coal tailings.The pumps can be operated in series according to special requirements.
Notation:
80EZJ(V)-A42
E:Excellence
ZJ:Slurry
V:Vertical type
80: Discharge size (inch)
A:5 B:4 C:3 (the number of the vanes of the impeller)
|
|
The IC ISO Chemical Process Pump Is Designed In Accordance with ISO 5199EN25199 and Dimensionally Complies with ISO 2858EN22858 and DIN 24256.
Specifications:
Capacities to 340 m3/h (1490 USgpm) at 2900 rpm & 400 m3/h (1760 USgpm) at 3500 rpm
Heads to 160 m (525 feet) at 2900 rpm & 210 m (685 feet) at 3500 rpm
Temperature Range -40° C to 180° C (-40° F to 360° F), optional as ICP up to 280°C (530°F)
Pressures to 16 Bar (235 PSIG), optionally 25 bar (360 psi); sizes 65-40-315 and 80-50-315: 25 bar (360 psi) standard
Materials - Ductile Iron, 316 Stainless Steel, Duplex SS, Alloy 20, Hastelloy, Titanium
|
|
|
|
|
|
Standardized centrifugal pumps NOS/NOLH, INTO 733 - ISO 5199
BEACHES Of USE
Flow: up to 1800 m3/h
HMT: up to 140 mCE
Operating pressure max: 10/16 bar following hydraulics
Beach of temperature: -40 to 170 °C
DN32 with 300
Viscosity max: 150 cST
APPLICATIONS
Effluents: Slightly charged clear fluids and, fluid corrodents, acids, solvents...
Transfer of fluids for the following applications:
- Industrial Applications
- Water supply industrial
- Industrial Water supply
- Périprocess (circuits coolant, buckles heating...)
- Systems of filtration
- Systems of cleaning, washing in industry
- Protection fire (Sprinklers) for certain models
ADVANTAGES
- Hydraulic High efficiencies
- Simple Maintenance, interchangeability with all pumps in conformity with the standard IN 733 (NFE 44111)
- Tree and stages reinforced in accordance with standard ISO 5199
- For the drinkable water supply, a certified version ACS is available on request
In option: Spacer, wheel bronze, hydraulic stainless, version ATEX
|
|
THE PROCESS PUMPS
They are generally used in air separation or industries which need large quanties of liquefied gases.
Wide range of pumps up to 10'000 L/min.
Single or multiplestage pumps: differential head up to 1'000 m.
Large scale of feature with numerous options.
Available for all cryogenic gases except LNG for safety reasons
|
|
|
Liquiflo's Centry® Series are Sealed and Magnetically-Coupled (MC) Centrifugal pumps engineered and manufactured for the user with increased needs for equipment reliability. These pumps are specifically designed to handle the lower flow applications that create maintenance problems for standard ANSI pumps operating at less than BEP. The Centry Series pumps can handle flows up to 160 GPM and heads up to 100 ft. They are available in 316 Stainless Steel or Alloy-C constructions, and with threaded or flanged port configurations.
|
|
The APV PUMA+ Centrifugal Pump
The prime choice for standard duty operations
The APV PUMA is a single-stage, centrifugal pump designed specifically for standard duty applications in the food, dairy, brewery and beverage industries. Widely recognized for its low installation costs, problem-free operation, stringent hygiene standards and flexibility, the APV PUMA range comprises 3 basic pump configurations offering heads up to 7.8 bar, flow rates up to 135 m3/h, and system pressure up to 16 bar.
* Flexible Installation
* Easy Maintenance
* Reliable Components
* CIP/SIP Compatible
* All product contact parts Stainless Steel 1.4404 (AISI 316L)
* FDA Approved Elastomers
* EHEDG Approved
|
|
Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed.
All pumps are equipped with a single mechanical seal.
These pumps are for horizontal installations next to or underneath a tank and they are designed to handle water-soluble coolants as well as cutting oils.
25 .... 2200 l/min
5 .... 60 m
|
|
The C5, C7 and C8 Series pumps are designed specifically for continuous chemical duty service. They are rugged, precision molded, and feature dynamically balanced, enclosed impellers. Units are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF (Solef® ) with ratings of 1/3, 1, and 1-1/2 horsepower. The standard mechanical seal is a John Crane Type 21 single seal, carbon/ceramic. Other seal materials are available depending on the process fluid. And, water-wash seals are available for especially aggressive or "crystallizing" liquids. Pump models are also available with a rugged cast iron bearing frame for belt-drive or other coupled drivers.
|
|
The new standard in dewatering pump technology is here: the 2600 series from Flygt. Designed to meet the increasingly stringent performance and economy demands of today’s industry, these pumps deliver unmatched wear resistance and consistent performance over time. Backed by Flygt’s outstanding support and worldwide presence, the 2600 series keeps your operations moving.
The six pumps in the range cover almost any application for work sites of every size, including construction sites, mines, and other tough environments. Output ranges from 0.75-18 kW/1.2 – 27 hp. All models feature cutting-edge design with new materials, and the patented Dura-Spin hydraulic system
|
|
Industrial pumping technology is one of the areas in which LEROY-SOMER has excelled for over 70 years.
By having control over both design and manufacture of hydraulic components, motors and control electronics, LEROY-SOMER guarantees the best performance and optimum reliability of its industrial pumping systems.
|
|
|
|
|
|
UREA DISPENSER
The new EURO 4/5 Directive, concerning the reduction of emission in the atmosphere, can be met with the installation of an SCR system in the truck. The system requires a special liquid (a water/urea mixture). Each truck will be fitted with an additional tank containing this liquid.
As a result of a through analysis of the problems to do with transferring this liquid, PIUSI has developed a reliable dispensing group using highly compatible components.
The complete group has been designed to be moved and connected to a new full container.
An accurate meter will visualize the quantity dispensed for a correct refilling of the truck.
The group is completed with an automatic nozzle, and a flexible delivery hose, for easy dispensing operations.
At the suction side we have two accessories available: suction hose with foot valve and filter or CDS quick connector.
Performances:
• Flow-rate 40 l/min
• Max delivery pressure 5 bar
• Self priming height up to 2 meters
• Meter accuracy +/- 1%
|
|
Applications: Typical applications serviced by the Advance Pump include
laser coolers, filtration systems, deionized water transfer, waste water reclamation,
pressure spray systems, fountains, plating chemical transfer and
recirculation, fume scrubbers, pollution control equipment, and transfer of
chemical process fluids.
Design: The Advance Pump is molded out of high-quality glass-filled Noryl®,
which gives it many advantages. It has good resistance to most acids, alkalis
and inorganics. Noryl® has excellent tensile strength, very low water absorption,
and a continuous temperature rating of 194° F.
We also offer the Advance Pump line in polypropylene. The design of the
pump, coupled with the chosen resins, produces a strong, durable, versatile
unit. When used with the patented Impenatra® seal, the fluid pumped does
not contact any metal parts. This allows it to properly handle many applications
at a fraction of the cost of exotic alloys.
|
|
|
Monostage centrifugal pumps with closed impeller or vortex open impeller, according to ISO 2858 & 5199 (series TCH).
|
|
Advantages
• Optimum performance
• Low power requirement
• Quiet operation
• Small space requirements compared to standard pumps
• Materials resistant to abrasion
• Individually adapted to the performance curves
• Individual designs trough mechanical assembly technique
• Easy accessibility for maintenance and service
• High safety and reliability
• Special versions with dry run protection, sealing liquid chamber and for delivery of hot media
|
|
Single-stage volute and double volute casing punps with dimensions to EN 733/DIN 24255 + meet the technical requirements of ISO 9908 and ISO 5199/EN 25199. In additions some designs meet EN22858/DIN 24256.
PERFORMANCE
• Capacity - max. 1800 m3/h
• Head - max.140m
• Speed - max. 3600 rpm
• Casing pressures - max. 40 bar
• Temperatures - max. + 400 °C
• Temperatures - min. - 40 °C
50 hydraulic sizes with closed impellers up to a transnorm size of 300 - 500.
• General Purpose Pumps
• Hot Water Pumps
• Thermal Oil Pumps
FEATURES
• Modular design
• Shaft deflection complies with ISO 5199
• High efficiency
• Low NPSH
• Interchangeable components
• Global service network
• SuperNova family
• Complies with "ATEX" legislation
|
|
TOP-FLO® C-Series pump dolly or cart has an emphasis on your convenience. It's mobility will allow you to find many functions in your manufacturing process.
Standard features are as follows:
Universal dolly for C100, C114, C216, C218 & C328 pumps with motors through 10 horsepower
Full 304 stainless steel construction with 2 fixed wheels
Bead blast finish
8.0" semi-pneumatic wheels
Adjustable pivot point axle
Handle mounted cord wrap
Optional features are as follows:
Finishes- mechanical polish, electropolish
Full range of control options- VFD, start/stop controls, network controls
Wheels-4 wheels, non-marking white wheels, full pneumatic, solid
Special customer design requirements
Designed for your convenience
Can be designed & manufactured to your specifications
Convenient roll-away design
Mobililty allows you to find many functions in your manufacturing process
Durable (full 304 stainless steel construction)
|
|
Wilfley's Model HD pump is designed for severe-duty applications including high concentrations of solids.
The HD pump offers large diameter impellers for low speed operation and heavy section thicknesses of hydraulic components for long wear life.
The dynamic seal feature provides for leak-free reliable operation without the requirement of seal water such as required by packing glands or mechanical seals. This means there is no product dilution and, without rubbing contact in the seal area, the Model HD pump can be run dry.
The Model HD pump offers easy inspection and change-out of key hydraulic components without disturbing the suction and discharge pipes.
This model is a proven performer in difficult applications containing solids and applications with upset conditions such as cavitation and momentary dry running, which are commonly found in loading/off loading applications.
|
|
All Fristam FP pumps are equipped with open impellers, which is an ideal design for sanitary applications. Specially selected stainless steel alloying that lives up to all requirements and solid components with a minimum wall thickness of 6 mm provide for problem-free operation for product viscosities of up to 1,200 cps.
# 14 sizes
# system pressures up to 25 bar or up to 80 bar with special pump models
# discharge pressures up to 15 bar
# flow rates up to 500 m3/h
|
|
Griswold’s 811CC Close Coupled centrifugal pumps match the features, flexibility and performance of our standard 811 ANSIs, but in a compact, space-saving design. With a smaller electrical motor replacing the traditional power frame, the 811CC offers significant benefits including:
* Direct Replacement. Like our entire 811 range, the 811CC pump is ANSI-dimensional, so it “drops” right in line using existing piping, providing an easy and economical replacement for most ANSI installations. If desired, you can even keep your existing ANSI casing and simply replace a defective or oversized power end with the 811CC's back pullout assembly—quickly and seamlessly.
|
|
Hoffman Centriflo® Series C35® Centrifugal Pumps are designed for use on condensate and boiler feed units.
They can also be used with our Adapter Flange Kit to replace pumps on other manufacturer's condensate units.
|
|
For today's machinery and tomorrow's demands, Hypro centrifugal pumps lead the industry! Pump capabilities range up to 358 gpm and 190 psi. With the largest selection of models, Hypro allows you to match the right pump to your equipment and task. Use Hypro centrifugal pumps for chemical spraying and transfer applications.
The broad, versatile line includes models with rugged housings of cast iron, stainless steel and polypropylene that stand up to strong chemical herbicides. Stainless steel pumps are ideal for use with Roundup® or other acid applications. Polypropylene pumps are lightweight and provide excellent resistance to corrosive chemicals.
Choose from gear, belt, DC clutch, and hydraulic motor drives, as well as models that are closed coupled to gasoline engines.
|
|
Corken Coro-Flo® pumps are a regenerative turbine design. They produce a maximum differential pressure of 150 psig (10.3bar g). Corken manufactures six sizes of Coro-Flo pumps, ranging from 2 to 35 gpm (7.5 - 132 L/min). These pumps can handle discharge pressures up to 400 psig (27.6 bar). These pumps are designed for continuous duty on light liquids.
Product Features
* Excellent for low flows and relatively high head pressures
* Linear performance curve
* Floating Impeller design - No metal to metal contact
* Impeller is the only moving part - minimal wear parts
* Extremely quiet and free of vibration
* Smooth continuous flow
* Years of service
|
|
|
Centrifugal pumps are used to deliver pulseless flows at flow rates higher than are typically achievable with positive displacement pumps. Liquiflo manufactures two separate families of centrifugal pumps to cover a wide range of chemical applications: The Centry® Series and the Endura® Series.
|
|
|
|
Centrifugal pumps
