|
|
These pumps are suitable for transferring clean liquids containing impurities measuring up to 2-3 mm.
The hydraulic components, namely the impeller, scroll and pump body in PBT. allow the pumps to e used with water, emulsions and oily substances with a maximum viscosity of 3° Engler (21 CST).
The temperature of the liquid must not exceed 70° C.
|
|
The pumps are suitable to transfer liquids containing impurities measuring up to 2-3 mm .The hydraulic components, namely the nylon impellerand scroll and the aluminium pump body allow the pumps to be used with water, emulsions and oily substances in general with a maximum viscosity of 3° Engler (21 CST). The temperature of the liquid must not exceed 90°C.
|
|
JJ Series submersible pumps are designed for installation in wells with guide rails. These pumps are designed specifically for solids handling and incorporate several engineering features that prevent jamming and clogging, the two most common problems in pumping fluids containing solids. These models feature a semi-axial flow impellers that have a large free passage that will handle up to 5.5" diameter spherical solids, depending on pump model. The impeller design has long screw-like vanes for handling long rags and other debris. JJ Series pumps have a cooling jacket and do not require submergence to maintain correct operating temperatures.
Specifications
|
|
|
AFEC Pump develops this grinder pump featuring a grinder mechanism at the suction port to chop foreign matters like kitchen waste, cloth, rubber, plastics, and etc. contained in drainage. The pumps are designed to pump small quantities of water, and large solids are effectively cut into very fine particles that can be pumped through small pipes without risk of blocking. Its extreme high pressure at low flows with only limited motor power makes it the first choice for small-volume transfer of residential, industrial and municipal sewage treatment systems.
|
|
The SludgeMaster submersible, air-powered trash pump handles mud, leaves, twigs, sand, sludge, trash-laden water and soft solids to 1.5" (3.8cm). High capacity - low head. It weighs only 59 pounds (26kg), and can fit through an opening as small as 14" (35cm). Sturdy construction for rough handling and long life. Optional rock screen available.
Pipe Size: 3" / 80mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 300 gal / 1140 ltr
Max. Solids Handling: 1.5" / 38mm
Max. Discharge Pressure: - PSI / - BAR
The PortaPump submersible, battery-powered pump operates using any 12-volt car or truck battery. It comes equipped with cables and battery clips. Extremely portable, the pump weights only 33 pounds (15kg) and can fit through openings as small as 10" (25cm). Electrically safe and whisper quiet.
Pipe Size: 1.5" / 40mm
Displacement Per Stroke: - gal / - ltr
Max. Flow per Minute: 43 gal / 163 ltr
Max. Solids Handling: 1/16" / 1mm
Max. Discharge Pressure: - PSI / - BAR
|
|
Operating Limits:
-Max.Depth: 5m
-Max.fluid temperature: 40°C
-Max.passage of suspended solid body: φ30mm
-Continuous duty
Material:
-Pump body: Cast iron
-Impeller: Cast iron
-Motor shaft: Stainless Steel
-Radial cutter: AISI5140
-Double seal: Mechanical seal ceramic-graphite-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Application:
·Drainage applications
·Sewage grinding
·Wastewater removal or transfer
·Dewatering
·Rcommended for usage in cellars, underground car parks, drains, cesspits etc.
|
|
Operating Limits:
-Max.Depth: 5m
-Max.fluid temperature: 40°C
-Max.passage of suspended solid body: ö35mm
-Min.drainage level from the bottom: 40mm
-Continuous duty
Material:
-Pump body: Cast iron
-Impeller: Cast iron
-Motor shaft: Stainless Steel
-Double seal: Mechanical seal ceramic-graphite-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
Application:
·Drainage and sewage applications
·Wastewater removal or transfer
·Dewatering
·Rcommended for usage in cellars, underground car parks, drains, cesspits etc.
|
|
Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding.
Axial / semi-open impellers
Inflated fluids / slurping
25 ... 2750 l/min
5 ... 115 m
|
|
The pumps are designed for:
- pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding.
- strongly contaminated liquids
- liquids which may also contain solids
- Neutral or aggressive media, such as alcalines, solvants, coolants, lubricants a.s.o
- Surface technique: washing, cleaning, degreasing, phosphating, pickling
- Machine-tool industry
- Environmental technology
- filtration and recycling technology
|
|
Salient Features
* Pump is capable of handling sand laden or brackish or geothermal water with ease.
* Driven through a series of shafts supported by water lubricated rubber bearings, through drive head installed on ground level.
* Can be driven by an electric or Solar Powered Motor or Diesel Engine and provides option for changing pumps speed to match bore well yield.
* Smaller bore diameter reduces drilling costs.
* Flow rates unaffected by change in lavel of water table.
|
|
SP4",6" and 8" submersible pumps are made of corrosion and abrasion resistant stainless steel and have been developed in accordance with state-of-the-art technology.The SP series of pumps are manufactured to the highest standards for energy efficiency,high performance,rugged construction and long service life for the most demanding applications.
Operating Limits
50Hz
- Capacity : max. 120m3/h
- Head : max. 432m
60Hz
- Capacity max.150 m3/h
- Head : max. 540m
- Liquid temperature : 0ﾟC to+60ﾟ
- Sand content : Max. 50g/ m3
Applications
- Residential Potable water supply from deep wells
- Municipal and industrial waters supply
- Irrigation and other agricultural applications
- Fire fighting systems
- Pressure boosting in high-rise buildings and other applications
|
|
These rugged, chemical duty pumps are available in CPVC (Corzan®), fiberglass reinforced Polypropylene, and PVDF. Precision molded, dynamically balanced, "enclosed" impellers allow pumping of abrasive solutions and operating against closed discharge valves.
|
|
Pumpex drainage pumps are submersible to 20 m depth and have no suction lift limitations.
This is superior to any self-priming system due to the fact that the pump is installed submerged in the pit. The pump does not need to be moved with varying water levels and it is designed to run dry in case the water level drops too low.
|
|
|
The WQD is a single open impeller centrifugal submersible drainage pump designed to function either parity or totally submerged.
|
|
APPLICATIONS
* RAIN, SEEPAGE, SUMP PIT AND CATCH TANK WATER PUMP OUT
* GARDEN AND VEGETABLE-GARDEN MINI FLOOD IRRIGATION SYSTEM RAINWATER CATCH TANK PUMP DOWN
* WHITE WATER PUMP OVER FROM RESERVOIRS AND VATS.
* PUMPING DIRTY WATER WITH POSSIBLE FLOATING SOLID CONTENTS (ONLY VOX SERIES)
DESIGN ENGINEERING
* SEMI WET MOTOR WATERCOOLED
* SEALING RING -ENGINE FACE OIL BATH MECHANICAL SEALS
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS.
* CLASS “F” INSULATION.
* MAX. PUMPED LIQUID TEMPERATURE: 50°C
* BY PASS SECTION: 10 mm MIZAR 30/S-60/S
20mm MIZAR 60/S VOX.
|
|
Construction
- Submersible drainage pump constructed with composite polymers developed especially for this product.
- These new rustproof materials are resistant to corrosion, indeformable at maximum temperature differentials in the pump and motor and resistant to internal and external strain.
- Shaft of chrome steel AISI 430. Three lip seals in NBR.
- Minimum dimension and high levels of performance, for flow rates up to 200 liters/min.
- With float switch for automatic start/stop.
Applications
- For clean or slightly dirty water.
- For draining flooded rooms or tanks.
- Extraction of water from ponds, flowing water or pits for collection of rain water.
- For irrigation purposes.
- For use outdoor, the power supply cable shall have a length not less than 10 m.
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
The US 75 - 155 series submersible drainage pumps are used for all applications where particularly dirty wastewater with large particle sizes of up to 50 mm need to be pumped. These pumps, with a free passage of 50 mm, pump solids and fibres quickly, reliably and, most importantly, without blockages
- 50 mm free passage
- discharge branch 2"
- Hmax = 13 m
- Qmax = 32 m3/h
|
|
|
|
|
|
FS Series FS-237/337/355/455
Construction Dewatering Pumps
Compact design, high performance and exceptional durability for handling abrasive liquid, widely used on general construction and civil engineering..
Pump Description
Designed for continuous duty with stable operating performance to carry dirty or clean water, for drainage and irrigation purpose. It features an up-discharge and double-casing design and the motor is always cooled by the pumped liquid, which gives it a superior cooling effect and long-lasting running no need to be personally attended on site. The pump is constructed of:
a.fine casting discharge outlet and top cover,
b.rigid stainless steel outer case and strainer,
c.quality stainless steel 410 motor shaft protected by sleeve against
direct wear by the contact parts,
d.double mechanical seals (lower silicon carbide V silicon carbide,
upper carbon/ceramic) in oil chamber,
e.dynamically balanced high chrome steel impeller,
f.lubricated-for-life and maintenance free bearings to support shaft,
g.and standard 10 meters (33 ft) power cord (or longer upon request)
|
|
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. The are mounted on top of the container, the pump extension being immersed in the coolant.
Semi-open impellers
Standard coolant pumps
25 ... 3200 l/min
4 ... 115 m
|
|
The D1 and DD1 are enhanced replacements of the durable SS1 series pump. The 1/8 HP motor with 1/2" diameter extended shaft and (4) precision machined pump mounting pads ensure trouble free performance for the more demanding industrial applications.
Precision molded, dynamically balanced, semi-open impellers with a unique "tandem" design allow for its ability to operate against closed discharge valves.
|
|
APPLICATIONS
Emptying of water traps and collection tanks of:
- Tanks emptying out
- Ground water
- Water discharged from dishwashers, washing machines and domestic appliances in general
- Emergency pumping out of cellars, underpasses and garages
- Pumping of waste waters
- Drainage
- Industry in general
|
|
Semi-Axial Electric Submersible Pumps 4"
APPLICATIONS
Suitable for lifting, pressurising and distribution in civil and industrial installations, autoclave and cistern inlets, fire fighting and washing plants, irrigation systems. Draws from wells, tanks or natural basins.CHARACTERISTICS
The semi-axial hydrodynamic configuration reduces
the diametrical dimensions of the hydraulic elements,
obtaining modest pressures with average flows.COUPLING
The pump is formed by an electric motor type:
4‘’ CL95 4’’ (oil bath motor)The flanging of connection to the motor and the
shaft projection comply with the following standards:
4’’ NEMA 1-18.388
|
|
Nikkiso Cryogenic Pumps, wetted motor type submerged pump, specially suited for cryogenic liquefied gas such as LNG, LPG and LEG.
* Submerged wetted motor configuration eliminates leakage of liquids and make pump construction simple
* Long bearing service life by minimal gearing load design
* Pump test facility with LNG (-162℃) is available
|
|
APPLICATIONS
* FOR SWIMMIG POOLS
* FOR EMPTYING BOAT
MAIN FEATURES
* BODY PUMP: PP30FV
* INSULATION CLASS: F
* PROTECTION CLASS: IP 68
* IMPELLER: Noryl
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
|
Gorman-Rupp Widebase submersible pumps tackle the big jobs. Where large solids are not a problem, these versatile models offer high-head, high-volume operation and stand up to the abuses of the worst conditions. Whatever the application – general construction, strip mining, tunnel work or general purpose – Gorman-Rupp Widebase pumps are built to operate quietly, effectively and safely.
|
|
Head Meters 12 15 18 21 24 27 30
Feet 40 50 60 70 80 90 100
Discharge (LPM) 168 148 132 116 103 79 42
LEEMAC Single Jersey High Speed Circular Knitting Machines are the latest introduction of indigenous machines to Indian markets. These are available in sizes ranging from 14" to 36" and have many unique features in our design. Backed by a team of engineers with long experience in the field, these machines are designed and built to operate trouble free for long service life.
|
|
|
|
|
|
Radial electric submersible pumps for 6” wells made up of a multi-stage pump unit prepared for coupling to submersible electric motors (2 poles - 50 Hz), according to NEMA Standard. The pumping unit is made up of an external casing containing the hydraulic components (diffusers, impellers, spacers and bushings). The complete manufacturing cycles of all the components of the pumping unit are made on the Meccanica industriale S.r.l. premises.
• Impellers and diffusers are made of thermoplastic material reinforced with high wear-resistance fibreglass; they are protected with stainless steel inserts in the points of major stress;
• Suction casing and Delivery casing are made of brass alloy with high level mechanical specifications;
• The insertion of a special sliding block lessens friction where the soil is particularly sandy;
• Pump shaft, external casing, cable guard, suction screen, bushes , coupling , pins and bolts are all made of stainless steel;
• The check valve is fitted into the delivery casing.
6" TYPOLOGIES
6D Maximum Capacity 250 litre/minute
6Z Maximum Capacity 400 litre/minute
6X Maximum Capacity 500 litre/minute
6V Maximum Capacity 800 litre/minute
|
|
Semi-axial submersible electric pumps for 6” wells, made of a multistage pump unit prepared for coupling to submersible electric motors (2 poles - 50 Hz), according to NEMA Standard. The pumping unit is made up of the hydraulic components coupling (diffusers, impellers, spacers and bushings). The complete manufacturing cycles of all the components of the pumping unit are made on the Meccanica industriale S.r.l. premises.
• The impellers are available made of bronze or cast iron alloy;
• The diffusers are made of cast iron;
• Axis made of chrome steel double;
• Suction screen, coupling, cable guard , nuts and bolts are made of stainless steel;
• The check valve is fitted directly inside the delivery casing;
6" SEMI-AXIAL TYPOLOGIES
6C Maximum Capacity 700 l/min
6B Maximum Capacity 900 l/min
6A Maximum Capacity 1200 l/min
6E Maximum Capacity 1500 l/min
|
|
|
|
Submersible pumps
