|
|
Features:
- Long -life 24 VDC operation
- For 4" wells or larger
- Quick disconnect with "Watertite-Gland" Design Pat Pend
- Corrosion-proof housing with stainless-steel fasteners
- Runs dry without damage
- 50 mesh stainless steel inlet screen
- State of the art solid diaphragm
The solution to your remote water pumping needs. This pump is rugged, durable and built to last. The 9300 delivers a steady 112 GPH (422 LPH) at its maximum depth of 230 feet (70M) when supplied with 24 VDC. Its unique water-tight power connector stops water wicking and prevents potential condensation problems. Great for livestock watering, irrigation, pond areation, remote homes and cabins.
|
|
* Applications:
Power Generation,Pressure Boosting,Sea Water,Subsea Drives,Water Supply,Water Treatment,Deep Well,Dewatering,General Purpose,Geothermal,Irrigation,Mine Dewatering,Municipal,Offshore,Potable Water
* Industries:
Desalination,Ground Water Development and Irrigation,Miscellaneous Services,Snowmaking,Water Handling and Treatment,Water Supply and Distribution,Water Treatment
* Standards:
* Misc:
Oil Filled Motors with self contained force feed, filtered, cooled oil circulation system to maintain continuous lubrication.
Vacuum Pressure Impregnated (VPI) Epoxy, Class F Insulation System for superior insulation and long service life.
Double-Acting Thrust Bearing System for continuous up or down thrust capability.
Heavy-Duty, High Efficiency Impellers are dynamically balanced to minimize vibration and maximize service life.
|
|
Thermoplastic vertical centrifugal pumps conceived for industrial applications, production lines and ecological facilities where resistance to chemical aggression must be coupled with reliability and easy maintenance.
Their particular construction eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity with the standards in force. The adoption of pumps with these characteristics eliminates, even in case of breaks, hazardous leaks and the need for openings on the bottom of the basins or tanks, allowing the absolutely safe pumping of chemical substances.
|
|
These submersible centrifugal vortex type pumps are made, from top to toe in stainless steel and can handle a pH range of 2 – 14. In other words they are dedicated to handle corrosive media. Designed to work in demanding environments, pumping corrosive liquids and sludge’s as well as larger solids. The risk for clogging is very low due to the vortex technique. Typical applications include: Sewage and wastewater pumping, Industrial effluent handling, Chemical industry, Food processing, Textile industry and Tunnelling.
The performance range up to 57m in head and 60l/s in flow.
The pumps can be permanently installed on discharge with guide bars or as free standing for hose or pipe fitting
|
|
Features
* Multistage
* High speed
* Radial flow / mixed flow
* Low power consumption per stage
* Nitrile rubber bushes suitable for voltage fluctuation 200 V to 440 V
Applications
* Agriculture
* Irrigation – conventional and sprinkler
* Booster application
* Water supply schemes for industries
* Construction
* Cooling and air-conditioning installation
|
|
Construction
- Submersible motor pumps for deep wells of 6" (DN 150 mm) and 8" (DN 200 mm), with external jacket and stages in stainless steel AISI 304 or AISI 316.
- Radial impellers 6SDX 13-18-27
- Mixed flow impellers 6SDX 45-60, 8SDX 78-97
- Connection: Screwed connection ISO 228
- Delivery casing with built-in non-return valve.
Applications
- For water supply.
- For civil and industrial applications.
- For fire fighting applications.
- For irrigation.
|
|
Griswold 4”, 6” and 8” Submersible Turbine Pumps are designed for a wide variety of applications . . . farm, home, fountains, irrigation, industry, municipal and commercial use.
Seven Series of 6” pumps with flow rates up to 550 GPM and two series of 8” pumps up to 1000 GPM.
Discharge, Intermediate Bowls and Motor Brackets: Heavy duty class 30 cast iron for maximum efficiency and abrasion resistance. Reliable long life bronze bearing in every stage.
Impeller: Balanced lead free silicon bronze, enclosed impellers designed for maximum efficiencies with a wide range of hydraulic coverage and corrosion resistance.
10”, 12” & 14” Turbine Submersibles are also available, utilizing our vertical turbine bowls and fabricated brackets. Contact our application engineers for more information.
Fabricated assemblies available for in-line booster pumps and other special fabrication requirements.
|
|
Close-coupled submersible pumps
Applications
- Water supply from rain water tanks or reservoirs, 6” wells, basins and watercourses.
- Sprinkler systems.
- Pressure boosting with pump inserted directly in tank or well, to avoid
suction problems and noise.
Specifications
- Delivery: up to 7,5 m3/h.
- Head: up to 80 m.
- Maximum pump overall diameter: 128 mm.
- Maximum immersion depth: 20 m.
- Maximum permissible quantity of suspended sand: 25 g/m3.
- Passage of solids up to 2.5 mm.
- Delivery port: Rp 1”1/4.
- Rated motor power: 0.55 to 1.1 kW.
|
|
|
Multistage submersible water pumps for 6” deep wells (DN 150 mm). Particularly suitable for civil and industrial purposes, for sprinkler and food irrigation plants, in fire intallations and generally speaking for clean water supplying.
|
|
|
The 6 inch canned design motor features a replaceable plug-in motor lead, moisture resistant insulation and a specially formulated patented resin that protects the motor against thermal fluctuation and internal stress. The 8 to 10 inch rewindable water-tight motor has a coil conductor insulation material that is specially developed denatured polypropylene, which offers excellent leak-resistant characteristics. Three barriers are applied to the copper conductors to provide complete insulation against the motor’s cooling fluid. This design is the result of extensive research and is of superior quality. It insures that CentriPro motors will have an extremely long service life.
|
|
SPP submersible pumps are custom engineered for the oil and gas industry. Pumps are of the vertical turbine design and can be provided in either single or multi-stage configuration to suit client's requirements. They are driven by submersible (IP68) motors as an alternative to deck mounted drive units and can be supplied up to 100 meters in overall length.
Typical Applications:
* Main fire pump
* Firewater jockey pump
* Booster pump
* Seawater intake
* Seawater lift
* Cooling water
* Utilities
In pump packages incorporating electro-submersible pumps, the pump and motor are located below sea level in a caisson, while the diesel generator is placed on the platform where space allows. These systems tend to be favoured where platform design or space limitations prevent the use of conventional platform mounted lineshaft pumps.
|
|
|
|
|
|
Slurry removal is an essential part of day-to-day
operations in a wide range of industries, such as
mining, ore dressing, sand contracting, ash handling
and steel milling.
The applications in these industries make heavy
demands on the slurry pumps, particularly in terms of
the costs incurred when it comes to wear and tear,
repairs and maintenance.
In this series of pumps the wet end, indeed all wear
parts, are made of hardened high-chrome cast iron,
which provides complete wear protection. The highchrome
impeller, incorporates a swept-back design for
sustained high efficiency and clog-free performance in
the most severe applications.
The drive unit can be easily detached from the wet
end for fast access to wear parts. And there is no
need to replace the entire wet end because the split
casing design enables the volute lining to be easily
accessed and replaced.
Flygt is the only manufacturer that offers its customers
a total solution for slurry handling. The pumps can be
supplied with an agitator and/or a mixer for a cleaner
sump. Optional internal cooling allows pumping down
to low levels, avoiding sediment build-up – we call it
Clean Sump Technology.
Slurry pumps have capacities of up to 350 l/s and
pump heads up to 100 metres.
|
|
|
|
|
|
PUMPEX new sludge pumps, series SK – is a complete range, from 3" to 6”, of heavy duty, transportable, sludge pumps in cast iron.
PUMPEX sludge pumps SK 65-155 are available in high head and high flow versions with submersible motors from 1.3 to 25 kW.
The SK range is an important extention of Pumpex well known SP sludge pump series.
Product benefits Pumpex SK pumps
Trouble free and safe handling
PUMPEX sludge pump SK is a portable pump and features a sturdy stainless steel handle and a robust ductile iron stand.
Non overloading performance
All SK sludge pumps can operate over the entire performance curve without overloading the motor.
Easy service and maintenance
Modular design through the complete range with interchangeable spare parts makes maintenance and service easier.
Dry running capability
A closed cooling system enables the PUMPEX SK 83-155 to run dry, with no damage to the mechanical seals or the motor.
Solids handling capability
The SK sludge pumps are fitted with free flow vortex impeller and pump housing that provides excellent non clogging performance.
High reliability
PUMPEX SK 83-155 have cartridge seal unit with double mechanical seals for long life even under the most demanding operating conditions.
Environmentally safe
The oil housing on the SK 65-80 is filled with environmentally safe white oil and l friendly protection coatings are used on all the surfaces.
Explosion proof option
All SK sludge pumps are available in explosion proof versions EExd IIB T4 and ATEX.
High flexibility
The pump can operate in any position, vertical or horizontal.
|
|
|
|
|
|
The design process of the Warman SHW made extensive use of finite element stress analysis and state of the art solids modeling to ensure rugged, dependable solids handling capability at the lowest possible cost.
A heavy duty all chrome wet end coupled with a motor designed and built by Weir Minerals for the most demanding applications makes the Warman SHW the most dependable, long lasting submersible pump you can buy.
Features / Benefits
- Temperature sensor - Over-temperature sensors protect the motor by sounding an alarm or shutting down the unit if internal temperatures exceed safe operating limits.
- Moisture detector - A twin electrode system provides double protection by detecting moisture intrusion in either the motor housing or the mechanical seal chamber.
- Mechanical seals - The SHW incorporates Warman's proven balanced double-seal arrangement in which both sets of seal springs are enclosed in the oil reservoir. Silicon Carbide Seal faces are subject to submergence pressure only for greatly extended wear life.
- Heavy-duty water end - Standard high chrome iron construction coupled with heavy section thickness provides the ultimate in protection against abrasive wear in heavy slurries.
- Easy maintenance access - T-bolt construction allows rapid disassembly of the pump end for maintenance access. The heavy-duty impeller is not screwed on, but keyed to the shaft for easy removal and protection against movement during reverse rotation.
- Optional agitator - A robust agitator can be fitted to the suction eye allowing the pump to agitate high concentrations of solids.
|
|
APPLICATIONS
* DECANTATION PIT, SEWAGE PIT AND SLURRY COLLECTION PIT PUMP OUT.
* PUMP OUT OF LAVATORY/FOUL WATER WITH POSSIBLE FLOATING
SOLIDS CONTENTS.
* DOMESTIC AND INDUSTRIAL LAVATORY/BLACK WATER HANDLING
DESIGN ENGINEERING
* DOUBLE CHAMBER ELECTRIC PUMP (MECHANICAL SEAL, MOTOR).
* OIL BATH MOTOR (BIODEGRADABLE AND DIELECTRIC) FOR COOLING AND BEARING LUBRICATION.
* SEALING RING - ENGINE FACE.
* OIL BATH MECHANICAL SEALS.
* DOUBLE MECHANICAL SEALS:
ENGINE FACE: OIL BATH
PUMP FACE: WATER BATH
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS
* CLASS “F” INSULATION
* MAX. PUMPED LIQUID TEMPERATURE:
25°C with PARTIALLY submerged pump.
50°C with TOTALLY submerged pump.
|
|
APPLICATIONS
* DECANTATION PIT, SEWAGE PIT AND SLURRY COLLECTION PIT PUMP OUT.
* PUMP OUT OF LAVATORY/FOUL WATER WITH POSSIBLE FLOATING SOLIDS CONTENTS.
* DOMESTIC AND INDUSTRIAL LAVATORY/BLACK WATER HANDLING SYSTEMS.
DESIGN ENGINEERING
* DUAL CHAMBER ELECTRIC PUMP (MECHANICAL SEAL, MOTOR).
* OIL BATH MOTOR (BIODEGRADABLE AND DIELECTRIC) FOR COOLING AND BEARING
LUBRICATION.
* SEALING RING - ENGINE FACE.
* OIL BATH MECHANICAL SEALS.
* PERMISSIBLE DRAUGHT OF WATER: 5 m
* IP 68 PROTECTION CLASS.
* CLASS “F” INSULATION.
* MAX. PUMPED LIQUID TEMPERATURE:
25°C with partially submerged pump.
50°C with totally submerged pump.
* BY PASS SECTION: 30 mm. - TIGER 70
35 mm. - TIGER 80
50 mm. - TIGER 100 - 150
|
|
Description.
We plan and manufacture high quality submersible electro pump, using the best materials available on the market, Such materials are chosen evaluating the characteristics of the fluid: grey lamellar graphite cast iron …INOX AISI 316 Steel, Duplex, Hasteloy and Marine Bronze. Reliability and duration of Faggiolati products are granted by a perfect balance of the shaft and the impeller and by certified vibration and waterproof resistance test under high reliability.
The product range includes electro pumps which runs from 0.5 Kw to 110 Kw with 2-4-6 poles (50 and 60 Hz) Different type of hydraulic are: Single channel – channels – high efficiency vortex type – drainage – grinder.
Uses
The right type of material is chosen taking in consideration the numerous type of hydraulics , it allow the use of our pump, on salty water and different type of treatment plants as: desalination plant, sewage water raising, pumping and draining of aggressive liquids, industrial waste waters
|
|
Gorman-Rupp hydraulic submersible pumps are designed for trash-handling, dewatering applications and for pumping dirty liquids such as mining and paper plant wastes. They are also excellent for pumping sewage from digester and holding tanks as well as sewer bypass. Because they operate without using electricity, they are well suited for applications where electricity is hazardous.
Specifications
Size: 3" (75 mm), 4" (100 mm), 6" (150 mm)
Max Capacity: 1,600 GPM (101 lps)
Max Head: 175' (53 m)
Max Solids: 5" (127 mm)
Max Temperature: 170 F (77 C)
Materials of Construction: Aluminum, Ductile Iron
|
|
ELECTRIC SUBMERSIBLE PUMP SM-VX SERIES
Submersible pumps series SM-VX for professional use, particularly reliable with generous motor specification and hard-faced mechanical seal. The proven VORTEX system allows the clearing of dirty water containing suspended solids
|
|
Operating Limits:
-Max.Depth: 10m
-Max.fluid temperature: 60°C
-Max.ambient temperature: 40°C
-Continuous duty
Material:
-Pump body: Cast iron
-Impeller: Cast iron
-Motor shaft: 45#Steel/Stainless Steel
-Double Mechanical seal: Silicon/Silicon+Ceramic/Graphite
Application:
·Drainage and sewage applications
·Wastewater removal or transfer
·Dewatering
·Rcommended for usage in cellars, underground car parks, drains, cesspits etc.
|
|
FBV Series
Sewage Effluent, Vortex, Non-clog & Cutter Pump
Motor
a.Oil-free motor with thermal and over-current protector.
b.Asynchronous motor 3 phase, 2 pole, 50Hz/2850rpm or
60Hz/3450rpm.
c.Insulation class F=155ßC, Protection Type IP68.
Construction
a.Completely sealed water resistance cable entry.
b.Durable Cast lron casing for superior heat dissipation.
c.Highly wear resistance heat treated 410 stainless steel shaft.
d.Double mechanical seals (lower silicon carbide v silicon carbide,
upper carbon/ceramic) for superior wearing resistance and to ensure
durability.
Pump
a.Rigid ductile iron impeller, abrasion resistant, in various design.
b.Max. liquid temperature: 40ºC (104ºF)
c.Max. submerged depth: 10m (33ft)
d.Cable: 10m (33ft) PVC or HO7RN-F upon request.
e.Guide Rail Fittings are available upon optional request.
|
|
This series of pumps covers an extensive performance range and can be used in a variety of applications: from pumping sewage in treatment plants and municipal applications, handling industrial effluent, process water and raw water, to applications in aqua and agriculture.
The standard version of these pumps is made in cast iron and for more demanding applications the pumps can be supplied in industrial configuration. The pumps are also available in explosion proof versions. An extensive range of hydraulic sections, including the impeller and volute, are available to handle different types of media. The capacities range up to approx. 2,700 l/s. A variety of drive units, with motor ratings up to 780 kW, are also available.
|
|
|
|
|
|
Pumps submarines F range MOVED Technology
Pumps of recirculation RZP range MOVED Technology
BEACH Of USE
Flow: up to 8000 m3/h
HMT: up to 100 mCE
APPLICATIONS
Installation of raising in dry or immersed pit
Raising, evacuation or exhaustion of waste water and charged
Water treatment: at the head post raising of station, bridge desanding pool, post office all water, posts extraction of muds in excess, station of recirculation of muds, recirculation of mixed liquor, raising of muds
digested, raising of the filtrations, raising of greases...
Basins of storm, rain water stations, hydrocarbon surface waters charged...
ADVANTAGES
Broad choice of wheels: vortex, channel, dilacératrice or with propeller
Double trimmings or with cartouches offering a great facility of maintenance
Possibility of cooling of the engines by oil bath for operation pumped out uninterrupted
Exit attaches standardized for adaptation on existing foot of base
Pump housing out of cast iron high-quality, high-output wheels
Tight entry of cable, assembled with a cable resistant to heavy loads
Room on terminals isolated against the pressure and the entries from water in winding
Ring hard material wear, it protects the pump housing and the wheel from the first aggressions
OPTIONS
Engine ATEX on request
Coating CERAM patented C0 MOVED Technology against abrasion and corrosion (ceramic coating without solvent, thickness 400µm with 3mm, adhesion 15N/mm ²)
Mechanical Ganiture in cartridge
Head of emulsion in Abrasit for the sand effluents charged
|
|
Features
* Non-clog two vane or single vane enclosed impeller
* Permissible solid size up to 85 mm
* Gland packed / Mechanical seal
* 50 HZ / 60 HZ availability
Applications
* Effluents
* Waste water
* Storm water
* Raw sewage
Range
* Delivery size up to 200 mm
* Capacity up to 750 m³ /hr
* Head up to 48 metres
* Temperature (-) 10 degree C to 90 degree C
|
|
The CP 10 and CP 20 submersible pumps are designed with the performance and durability which make them ideal for removing water from trenches, ditches, manholes, industrial sumps and excavations. Will pump down to within 7/8' (22 mm) from base.
* Single-stage centrifugal units driven by powerful vane motors
* Double seals protect bearings and motor from water and mud
* Integral oiler provides continuous lubrication
* Integral strainer, air inlet valve
* Bronze impeller
* Cast-iron housing
|
|
One of the main characteristics of FAGGIOLATI PUMPS is the high flexible production, that allows the realization of customised machines made according to customer’s requirements.
Nearby the standard production – our General Catalogue boasts more than 200 standard products – we realize special machines to meet the particular requirements of customers regarding hydraulic, metallurgy and power supply.
|
|
MultiCut Pumps with external adjustable cutting system
MultiCut submersible pumps are ideally suited for sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects. These pumps are ideal for mounting in remote situations, such as motorway service stations and rural communities/farms etc.
For sewage and waste disposal in residential areas, such as housing estates, holiday parks or individual housing projects.
- Discharge branch DN 32
- Hmax = 17 m
- Qmax = 16 m3/h
|
|
Submersible Pumps for dirty water
Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Head up to 20 metres, delivery up to 425 l/min (25,2 m3/h). Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power. Motor cooled by pumped liquid diffuser plate coated with Polyurethane for maximum resistance to abrasion compact and lightweight
Applications
- Draining of cellars, garages, basements.
- Draining of construction sites.
- Emptying of tanks and reservoirs.
- Lawn and garden irrigation.
- Fountains.
- Pumping of domestic wastewater (washing machines, showers, Sinks).
- Emptying of tanks in industrial and ecological Applications.
Specifications
- Liquid temperature up to 50°C.
- Open impeller.
- Minimum level of pumped liquid: 25 mm.
- Suspended solids handled up to 8 mm.
- Maximum immersion depth: 7m.
- 10 meters of HO7RN-F type neoprene power cord.
- Dry motor (class F insulation).
- IP 68 protection.
|
|
Characteristics
- Vertical.
- Single Suction.
- Single Stage.
- Submersible Motor.
Applications
- Water.
- Rain Water.
- Combined Sewage.
- Sea Water.
- Cooling Water.
- Sludge.
|
|
ELECTRIC SUBMERSIBLE PUMP SM-VXC SERIES
Submersible pumps SM-VXC series in cast iron, particularly robust and reliable, intended for continuous heavy duty use in fixed installations, in building services and industry, recommended for sewage and waste water of all types with solid impurities
|
|
|
|
Submersible pumps
