Hydraulic pumps

271 companies | 1312 products
Filters
  • What’s new?
    Submit
high-pressure intensifier - max. 413.7 Mpa | Jetpower evo

A new concept of technologically rich, high precision pressure intensifiers able to meet the most...

high-pressure intensifier - Easypump

Very high pressure intensifier: Two parallel, independent...

high-pressure intensifier - max. 6 200 bar | Xstream

High pressure 6.200 bar intensifiers, result of the cooperation...

{{productDetail[11955]}}
hydraulic lifting pump - max. 45 m³/h, max. 170 bar | GP series

Viking GP is an extensive series of fixed displacement
cast iron external gear pumps for fluid power
(hydraulic) applications. With 24 displacements in five
frame sizes to 190 GPM (43 M3/Hr), some models offer
pressures...

{{productDetail[22350]}}
booster pump - max. 135 m³/h | COR MHIExxVR series

Pressure boosting system with 2 to 4 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps with speed-controlled...

booster pump - max. 650 m³/h | COR MVIExxVR series

Pressure boosting system with 2 to 4 parallel-switched, non-self-priming stainless steel high-pressure multistage centrifugal pumps with speed-controlled...

booster pump - max. 100 m³/h | CO-MHIxxER series

Pressure boosting system with 2 to 4 parallel-switched, non-self-priming, horizontal high-pressure multistage centrifugal pumps made of stainless steel

Application:

...

pressure booster pump unit - max. 17 m³/h | COE-2 TWI 5 series

Pressure boosting system with two parallel submersible pumps (suitable for installation outside water), vertical, non-self-priming,...

multi-stage pressure booster pump unit - max. 100 m³/h | FLA-1 series

Pressure boosting system for fire extinguishing systems with indirect connection in accordance with DIN 14462.
With...

{{productDetail[24387]}}
axial piston pump / hydraulic lifting / variable-displacement - max. 16 MPa | AR series

These AR series pumps heve been developed on the basis of the same design...

piston pump / hydraulic lifting - max. 28 MPa | A series

With the well-known low noise level and a new addition of
A70. A90 and A145 pump versions...

axial piston pump / hydraulic lifting / variable-displacement - 31 MPa | AH series

AH series are variable displacement piston pumps of high
pressure, high efficiency,...

rotary vane pump / hydraulic lifting - 40 MPa | PV series

There is a variety of vane pumps from low-noise low-
pulsation, small-capacity models to low-noise high...

{{productDetail[7309]}}
electrically-driven pump / hydraulic lifting - max. 700 bar | DSP-120

The Alfra DSP-120 is an electric pump that has two-stage operation with holding ability...

hydraulic lifting pump / air-driven - max. 700 bar | LHP 700

The LHP 700, a hydraulic pump manufactured by ALFRA, is purposed for utilization with single-acting hydraulic cylinder for pliers, punchers and other...

electrically-driven pump / hydraulic lifting - max. 700 bar | AHP-03-1

The Electro Hydraulic Pump AHP 03-1 comes complete with a total working pressure of 700 bar, a 17-kilogram...

foot-operated pump / hydraulic lifting - Max. 700 bar | AEP-1

The AEP-1 is a hydraulic puncher capable of generating an operating pressure that reaches 700 bar. It has an integrated pressure regulator valve and a tank that has a volume...

hydraulic lifting pump / electrically-driven - max. 700 bar | SC-05 III B

The SC-05 III B model assembled by Alfra, is an electric hydraulic pump that features...

{{productDetail[19772]}}
multi-fluid pump / manual - PP, PVDF, PVC, V2A

OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping...

{{productDetail[63760]}}
rotary vane pump / hydraulic lifting / fixed-displacement - 4.7 - 61.5 l/min, 138 - 172 bar | HV10, HV20 series

HV10 / HV20 Series are fixed displacement and balanced type vane pumps. With compact sizes, they are available in single pumps and double pumps for both industrial and mobile application.
The vane design with self compensation for wear and clearances makes volumetric efficiency of pump nearly constant over the service life. (the vanes always...

rotary vane pump / hydraulic lifting / fixed-displacement - 4.7 - 61.5 l/min, 138 - 172 bar | HV2010, HV2020 series

The HV2010 and HV2020 series of double pumps are utilized in both industrial and mobile application. Possessing a vane design that reduces wear and clearances, the volumetric ability of the pump is constant...

rotary vane pump / hydraulic lifting / fixed-displacement - 11.3 - 363.4 l/min, 138 - 206 bar | HV, HVQ series

HVQ/HV Series are vane pumps of balanced type and fixed displacement. They are available for any industrial application with quiet 12-vane design and also for any mobile application (having wider speed range and higher pressure)...

rotary vane pump / hydraulic lifting / high-pressure - max. 280 bar | HT6GC series

The HT6GC range of sole vane pumps can be accompanied by a PTO. Through its...

rotary vane pump / hydraulic lifting / high-pressure / double - max. 280 bar | HT6xC, HT7Ex series

Higher operating pressure and greater flow is offered at the same housing size by these fixed displacement and balanced type double vane pumps. Outlet pressure is applied continuously...

{{productDetail[118227]}}
pressure booster pump unit - max. 1 300 m³/h, max. 12 bar | GEM

Firefighting booster range
Booster Pump Sets - GEM

The GEM series firefighting booster range is available in a modular system that's fully compliant with the EN12845 standard...

pressure booster pump unit - max. 6.60 m³/h, max. 6 bar |SPHERE, BLOCK UNITS series

These units consist of a single-phase automatic one pump pressure set. It's available in the electromechanical version, Sphere Units,...

booster pump - max. 62 m³/h, max. 16 bar | Gxx20 series

Extensive range of 2 pump sets controlled by pressure switches or pressure transmitters, with constant or variable...

variable-speed pressure booster pump unit - max. 750 m³/h, max. 16 bar | GV series

The Lowara GVF series booster sets are fully automatic booster sets for water supply. They are equipped with 2-6 pumps (where one can be a jockey pump), pressure transmitters and control panel with a SD60...

variable-speed pressure booster pump unit - max. 640 m³/h, max. 16 bar | GHV series

The Lowara GHV series booster sets are fully automatic booster sets for water supply. They are equipped with 2-4 variable speed pumps with a Hydrovar pump controller,...

{{productDetail[14009]}}
hydrau-pneumatic pump - 20 - 700 bar | P720 series

The Olmec P720 series of pneumohydraulic pumps is offered in two variants namely, P720 and P720/A. The P720 is controlled through a hand wheel while the P720/A is controlled through...

hydrau-pneumatic pump / compact - 35 - 455 bar, max. 9.5 l/min | P801 series

Occupying a limited workspace, the portable P801 pump runs on compressed air that has a pressure capacity ranging from 2 to 7 bar. It is commonly utilized...

hydrau-pneumatic pump / compact - 250 - 700 bar | P802 series

P802 pneumohydraulic pump is designed with the integration of a three-way directional control valve, which functions through supplying single-acting cylinders tanks. It is...

hydrau-pneumatic pump - 35 - 280 bar, max. 22 l/min | P820 series

High-performance pneumohydraulic pump with double-acting pneumatic motor. Operating on compressed air with pressures from 2 to 7 bar, it allows the construction of circuits requiring high oil delivery rates at medium-low...

hydrau-pneumatic pump / double-action - 110 - 1 855 bar, max. 22 l/min | P825 series

The P825 model, engineered by Olmec, is a pneumohydraulic pump, suitable in high-pressure circuits for pressurization, resistance and material deformation tests. This machine...

{{productDetail[16249]}}
circulation pump / oil - LB series

The OSIP LB 100 is a peripheral granulated impurity. This device is made up of brass and is designed with a self-priming...

circulation pump / oil - PBC series

The PBC series is a brass oil circulation pump that is specifically designed to develop...

circulation pump / oil - PBI series

The PBI series engineered by Osip, is an oil circulation pump that features a brass composition....

circulation pump / oil - PB series

The PB series engineered by Osip, is an oil circulation pump that features a brass composition....

{{productDetail[69614]}}
centrifugal pumping unit / aspirating / slurry / pump - EHM-14TU Capacity: 1368-3060 m3/h Head: 11-63 m

EHM-14TU is cantilevered, double-casing horizontal slurry pump with interchangeable anti-corrosive wet parts. It is widely...

{{productDetail[39039]}}
hydrau-pneumatic pump - max. 700 bar | PHP series

Hydraulic pressure proportional to air pressure
Working cycle : advance / hold / return
External...

{{productDetail[57218]}}
fuel oil pumping station - max. 180 l/min, max. 16 bar | PDP series

From the PDP series, this device has a driving rate of 1,000 to 3,600 rpm. Its flow of delivery reaches up to 180...

{{productDetail[27233]}}
hydraulic lifting pump / manual - max. 200 - 700 bar | HFP series

The BELL engineered HFP pump (Hydraulic Foot Pump) is less expensive than other pumps in the same category even though it is manufactured from steel. It can be used alone or...

hydraulic lifting pump / high-pressure / manual - max. 420 bar | EHP series

The Emergency Hand Pump by BELL is extremely performing despite it's very small, compact and light!

This kind of pump can reach high working pressures up to 420bars which can be set thanks to an adjustable relief valve.

The size of the tanks can vary bacically on the oil volume required, respectively 440 and 580cm3.

The oil flow per stroke is...

hydrau-pneumatic pump - 2.7 l/min, max. 700 bar | UPF

The Ultra air Pump model, assembled by BELL, is an air-hydraulic ultra speed pump that is operated via pedal. Its pedal features a 3 position consisting...

hydrau-pneumatic pump - 2.7 l/min, max. 700 bar | UPC

The Ultra air Pump Cetop model engineered by BELL, is an Air-hydraulic Ultra Speed pump that features a CETOP 3 connection. This device...

hydrau-pneumatic pump - 2.7 l/min, max. 700 bar | UPM

The BELL engineered UPM pump gives continuous or intermittent operation with single- and dual-acting cylinders. To keep the circuit pressure-fed even in standby mode,...

{{productDetail[17502]}}
circulation pump / oil - max. 10 L/min, max. 2 000 cST

The Viscomat - DC is a new range of transfer pumps and are utilized for those provisions where it is important to exchange the oil from stem or tanks and where it is not display for the...

circulation pump / oil - max. 50 L/min, max. 500 cST

The NUMAK Viscomat Vane is a type of pump and puddle. This device is used for the exigences for...

{{productDetail[86849]}}
hydraulic lifting pump / manual - 0.7 l | HP series

The HP pump is a single acting, hydraulic pump which is made out of stainless steel. It may be used with stainless hydraulic cylinders on work platforms and lifting tables,...

hydraulic lifting pump / stainless steel / manual - 1.5 l | HP-10 series

The stainless steel W.St.1.4301-make HP pump is a hand-operated pump that finds us in the food industry and areas that are environmentally sensitive. It has been designed for oil and...

hydraulic lifting pump / stainless steel / manual - HP-34

The HP-34 is specifically constructed to be one of the major solutions in several applications. It is a hand pump apparatus which...

{{productDetail[36877]}}
{{productDetail[22910]}}
hydrau-pneumatic pump / torque wrench - max. 2 500 bar, max. 1.1 l/min | MPS

The Resato lightweight mini pump unit type MPS can be utilized for the purpose of regulating bolt tensions and pressure testing. It can also be carried...

high-pressure pump / manual - max. 2 800 bar

The unit is manufactured by Resato and is a hand pump that is ideal for use...

{{productDetail[24985]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation