{{#pushedProductsPlacement4.length}} {{#each pushedProductsPlacement4}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement4.length}}
{{#pushedProductsPlacement5.length}} {{#each pushedProductsPlacement5}}
{{product.defLight}}
{{product.productLabel}}
{{product.model}}

{{#each product.specData:i}} {{name}}: {{value}} {{#i!=(product.specData.length-1)}}
{{/end}} {{/each}}

{{{product.idpText}}}

{{#if company.requestButtonsVisibility.requestButtonQuestion == "ACTIVE"}}
{{elseif company.requestButtonsVisibility.requestButtonWhereToBuy == "ACTIVE"}}
{{/if}}
{{productPushLabel}}
{{#if product.innovationType}}
{{else}} {{#if product.newProduct}}
{{/if}} {{/if}} {{#if product.hasVideo}}
{{/if}}
{{/each}} {{/pushedProductsPlacement5.length}}
radial piston pump / hydraulic / for industrial applications / high-efficiency
radial piston pump
RKP 250

Pressure: 350 bar

Its a proven to have a robust design with long service life and low noise emission. The combinations of RKP and pumps with standard interfaces such as dual pump arrangement making it adaptable to all types of modification. The whole ...

radial piston pump / hydraulic / for harsh environments / for wind turbines
radial piston pump

Pressure: 280 bar - 420 bar

Moog Wind Turbine Pitch Pumps are radial pumps offering higher output for wind turbine applications. The pumps come with hydraulic pitch pumps as part of its hydraulic power unit. They are all characterized by their low noise and durability ...

centrifugal pump / semi-submersible / for solvents / for acids
centrifugal pump
F 430 TR series

Flow rate: 0 l/min - 240 l/min

The horizontal drum pump is ideal for emptying IBCs and tanks: it is perfect for containers that are not accessible from the top or if there is no space for a vertical pump. The pump can be easily and fast cleaned as is can be disassembled ...

See the other products
FLUX
centrifugal pump / semi-submersible / for acids / for alkalis
centrifugal pump
COMBIFLUX

Flow rate: 12 l/min - 60 l/min

The small drum pump COMBIFLUX with removable motor FBM-B 3100 is particularly suitable for pumping comparatively small quantities from containers such as cans or up to 200 litre drums. The small diameter of the outer tube allows pumping ...

See the other products
FLUX
centrifugal pump / semi-submersible / for acids / for alkalis
centrifugal pump
FES 800

Flow rate: 0 l/min - 165 l/min

Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous ...

See the other products
FLUX
centrifugal pump / semi-submersible / for alkalis / drum
centrifugal pump

Flow rate: 0 l/min - 165 l/min

Pre-assembled pump kit to pump alkalis of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising sealless drum pump F 424 with outer tube in polypropylene, commutator motor FEM 4070, hose, hand nozzle ...

See the other products
FLUX
positive-displacement pump / semi-submersible / for solvents / petroleum
positive-displacement pump
F 550 TR

Flow rate: 0 l/min - 50 l/min

The FLUX eccentric worm-drive pump F 550 TR in horizontal version is perfect for containers that are not accessible from the top. It is used to pump thin to highly viscous, pasty, still flowing media. The positive displacement pump works ...

See the other products
FLUX
diaphragm pump / for fluids / for cooling water / hydraulic
diaphragm pump
Orlita® Evolution 1

Flow rate: 3 m³/h - 355 m³/h
Pressure: 12 bar - 400 bar

Maximum process reliability and flexibility. The Orlita® Evolution hydraulic diaphragm metering pump range of EF1a, EF2a, EF3a and EF4a form an integrated product range with stroke lengths of 15 to 40 mm. This covers the capacity ...

See the other products
ProMinent GmbH
diaphragm pump / for fluids / for cooling water / hydraulic
diaphragm pump
Orlita® Evolution 2

Flow rate: 6 m³/h - 900 m³/h
Pressure: 10 bar - 400 bar

Maximum process reliability and flexibility. The Orlita® Evolution hydraulic diaphragm metering pump range of EF1a, EF2a, EF3a and EF4a form an integrated product range with stroke lengths of 15 to 40 mm. This covers the capacity ...

See the other products
ProMinent GmbH
diaphragm pump / for fluids / for cooling water / hydraulic
diaphragm pump
Orlita® Evolution 4

Flow rate: 55 m³/h - 7400 m³/h
Pressure: 10 bar - 400 bar

Maximum process reliability and flexibility. The Orlita® Evolution hydraulic diaphragm metering pump range of EF1a, EF2a, EF3a and EF4a form an integrated product range with stroke lengths of 15 to 40 mm. This covers the capacity ...

See the other products
ProMinent GmbH
diaphragm pump / metering / solenoid-driven
diaphragm pump
Beta®

Flow rate: 0.74 l/h - 32 l/h
Pressure: 2 bar - 25 bar

The solenoid metering pump Beta® is equipped with all setting and control functions for modern water treatment and chemical metering. Compared to its predecessor model, it features pulse step down and step up function which adapts ...

See the other products
ProMinent GmbH
diaphragm pump / metering / solenoid-driven / chemical
diaphragm pump
gamma/ X

Flow rate: 0 l/h - 45 l/h
Pressure: 2 bar - 25 bar

The new solenoid diaphragm metering pump gamma/ X is user-friendly and has an outstandingly long service life, just like its predecessor. An ingenious solenoid control measures the back pressure and protects the system from overload. ...

See the other products
ProMinent GmbH
turbine pump / semi-submersible / slurry / hydraulic
turbine pump
Floway® VTP

Flow rate: 8000 m³/h
Pressure: 0 bar - 103 bar

Floway® VTP is a vertical close coupled, single and multistage turbine pump which is suitable for multiple applications in various markets. Various material combinations available for a wide variety of applications. Includes features ...

See the other products
Weir Minerals
centrifugal pump / submersible / slurry / hydraulic
centrifugal pump
Multiflo® MH

Flow rate: 0 l/s - 200 l/s
Head: 0 m - 90 m

The premium highwall mine dewatering pump from the global dewatering pump specialist. The submersible pump head assembly includes hydraulic-driven wheels to aid highwall ascent and descent, and a heavy duty hydraulic-driven submersible ...

See the other products
Weir Minerals
centrifugal pump / self-priming / slurry / for solids-laden fluids
centrifugal pump
Multiflo® ME

The Multiflo® ME range of electric driven pump units are capable of pumping not only water against high head situations, but also large quantities of solids and slurries encountered with mine dewatering. The Multiflo® ME range can ...

See the other products
Weir Minerals
centrifugal pump / slurry / hydraulic / high-pressure
centrifugal pump
Warman® AHP series

Flow rate: 0 m³/h - 4550 m³/h
Pressure: 0 Pa - 6900000 Pa
Head: 0 m - 73 m

The Warman® AHP/AHPP Fully lined high pressure pump is designed for applications with multiple stages. The AHP/AHPP provides the same advantages and features as that of its basis, the AH series. It can handle identical hydraulics up ...

See the other products
Weir Minerals
piston pump / slurry / hydraulic / high-pressure
piston pump
GEHO® DHC

Flow rate: 0 m³/h - 300 m³/h
Pressure: 1000000 Pa - 300000000 Pa
Power: 2 kW - 1200 kW

The heavy duty GEHO® DHC are WEIR'S valve operated hydraulic piston pump generally designed and developed to handle abrasive/corrosive and high viscosity sludge with large particle sizes and solids content. Built with excellent suction ...

See the other products
Weir Minerals
positive-displacement pump / for grease / lubrication / with DC motor
positive-displacement pump
P203

Pressure: 5000 psi

Quicklub Pumps With RemoteLinc Capability Lincoln has introduced its new P203 RemoteLinc™ pump for fleets using telematics. Designed to communicate with wireless systems, the unit combines the proven Quicklub® 203 pump with two independent ...

See the other products
Lincoln
oil pump / for lubrication systems / electric
oil pump
P653S

Pressure: 240 bar

System description: The P653S oil pump functions the same as the grease model and is the first Lincoln pump that includes a reservoir, pressure transducer, vent valve, low-level operation and controller in one compact unit. The P653S ...

See the other products
Lincoln
grease pump / hydraulic / lubrication
grease pump
HTL201

Lincoln has introduced its new Model HTL 201US Continuous Hydraulic Lubrication Pump. Developed to minimize friction and wear on small series hydraulic hammers from 650 pounds (295 kg) and heavier, the pump is suitable for additional ...

See the other products
Lincoln
piston pump / semi-submersible / oil / high-volume
piston pump

Horizontal Transfer Pumps These proven horizontal, valved-piston motor designed transfer pumps were created for simplicity and reliability. They are a cost-effective solution for oil distributors who need to supply pumps for customers ...

See the other products
Lincoln
gear pump / oil / lubrication / electric
gear pump
AC

Pressure: 0 psi - 5000 psi

Lincoln offers a range of rotary pump technology, one of which is the AC. The AC model is a lubrication gear pump developed without air or hydraulics. It can be used with a power supplies ranging from 120 to 230 VAC. The unit also ...

See the other products
Lincoln
piston pump / for grease / lubrication / electric
piston pump
HDI series

The HDI Pump Range - suitable for medium to large machine tools, fixed plant in quarries, steel works, coal mines, cement works and large cranes where a choice of lubricant from SAE 90 oil to NLGI grade 2 grease is required. The HDI ...

gear pump / for grease / oil / lubrication
gear pump

Pressure: 5 bar - 25 bar

The gear pumps are ideal for applications where a lot of lubricant is needed. Either for direct lubrication or for cooling bearings, these interlube gear pumps are made for continuous and cyclic automatic lubrication systems. The pumps ...

piston pump / for grease / oil / for centralized lubrication systems
piston pump

Ideally suited for use on applications where no electrical supply is available, and a fast time cycle is required. These Interlube Piston Pumps are designed for pneumatic applications and are suitable for use with oil or fluid grease ...

gear pump unit / single-line
gear pump unit
SKF MonoFlex (KFU)

The gear pump unit consists mainly of a gear pump with relief valve, safety valve, DC motor, transparent lubricant reservoir, filler socket and angle bracket. The DC motor and filler socket are covered by a hood to protect them from ...

gear pump unit / for centralized lubrication systems / single-line
gear pump unit
MFE

The MFE Group offers units designed to deliver the lubricant utilized in frequently operated, single-line centralized lubrication systems. Single-circuit pumps are also available as reservoir units that can be integrated with lubricant ...

centrifugal pump with volute / semi-submersible / for corrosive fluids / discharge
centrifugal pump with volute
GP series

Flow rate: 105 m³/h - 150 m³/h
Head: 16 m - 45 m
Power: 9.2 kW - 18.5 kW

Savino Barbera's production line presents The GP vertical centrifugal pump, it is a high performance device designed with a corrosion resistant thermoplastic technology. It has been designed to be ideally used for scrubber system that ...

See the other products
Barbera Savino
centrifugal pump / self-priming / for fluids / recirculation
centrifugal pump
OMA series

Flow rate: 5 m³/h - 85 m³/h
Head: 8 m - 45 m
Power: 0.25 kW - 11 kW

OMA horizontal centrifugal close coupled pumps allow recirculation, transfer and distribution of vari0ous chemicals held in tanks or process vats. They can be used for loading and unloading trucks and similar operations as well. Their ...

See the other products
Barbera Savino
centrifugal pump / semi-submersible / for flammable fluids / transfer
centrifugal pump
FUS MONO series

Flow rate: 0 l/min - 50 l/min
Head: 0 m - 10 m

The FUS MONO drum pump is a single-stage vertical centrifugal pump equipped with a closed impeller, cantilever shaft and bushings that are greased by the pumped liquid. Measuring 900 mm, this handy tool are ideal for the transport of ...

See the other products
Barbera Savino
centrifugal pump / semi-submersible / for flammable fluids / transfer
centrifugal pump
TR MONO series

Flow rate: 0 l/min - 80 l/min
Head: 0 m - 9 m
Power: 0 W - 500 W

TR Mono drum pumps are vertical centrifugal pumps that are engineered from polypropylene, polyvinylidene fluoride and AISI 316 steel elements, with additional ryton component for the internal parts. They permit discontinuous service, ...

See the other products
Barbera Savino
centrifugal pump / for fluids / suction / magnetic-drive
centrifugal pump
BM series

Flow rate: 3, 6, 12, 21, 30 m³/h
Head: 12, 9, 26, 7, 19 m
Power: 0.12, 1.1, 0.55, 2.2, 0.25 kW

Savino Barbera PP-PVDF BM magnetic pumps can handle maximum viscosity of 200 cSt. Parts coming in contact with the liquid are made of PP/PVDF and EPDM/Viton/Ceramic filled PTFE. The suction and discharge are FPT threaded. Several ...

See the other products
Barbera Savino
piston pump / for fluids / hydraulic
piston pump
16 - 360 cm³ | HP series

centrifugal pump / for potable water / dosing / booster
centrifugal pump
41.008.100

Flow rate: 3.6 l/min
Pressure: 0 mbar - 155 mbar

This magnetic drive pump has been created to allow increased pressure, which will enable a superior flow rate and improved dispensing accuracy. Perfectly suited to operate where low water levels in boilers cause a reduced flow rate due ...

centrifugal pump / semi-submersible / for hot water / metering
centrifugal pump
41.005.300

Flow rate: 0 l/min - 3.6 l/min
Pressure: 10 mbar - 102 mbar

This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water level in the boiler. Varying the voltage supplied ...

centrifugal pump / for hot water / dosing / booster
centrifugal pump
41.008.200

Flow rate: 12 l/min
Pressure: 0 mbar - 430 mbar

This pump with magnetic drive (model 41.008.200), designed to increase pressure so as to enable a higher flow rate and improved dispense accuracy is ideal for applications where a low water level in a boiler causes an insufficient ...

positive-displacement pump / for fluids / hydraulic / manual
positive-displacement pump
50 MPa (7 250 psi) | TMJL 50

Hydraulic pump TMJL 50, 50 MPa - (7,250 psi) is designed for low pressure side of the SKF OK connectors, but it is equally appropriate to use with the pressure requirement of 50 MPa (7,250 psi). A 3,000 mm (118 in) long high pressure ...

See the other products
SKF Maintenance and Lubrication Products
positive-displacement pump / for fluids / hydraulic / manual
positive-displacement pump
100 MPa (14 500 psi) | 729124

Hydraulic pump 729124 100 MPa (14500 psi) can be used with hydraulic nuts equal or smaller than HMV 54E. It can also be used in the applications where mounting and dismounting bearings and components are needed with a maximum pressure ...

See the other products
SKF Maintenance and Lubrication Products
positive-displacement pump / for fluids / hydraulic / extractor
positive-displacement pump
TMJL 100

The SKF TMJL 100 is a Hydraulic pump that is used for mounting and dismounting bearings or components. It is applicable for oil injecting operations that needs up to 100 MPa (14 500 psi) of pressure. The pump is integrated with an ...

See the other products
SKF Maintenance and Lubrication Products
positive-displacement pump / hydraulic / manual / two-stage
positive-displacement pump
150 MPa (21 750 psi) | 728619 E

The 728619E two-stage hydraulic pump is ideal for use with the SKF Supergrip bolts. It is also suitable for mounting and dismounting of components or bearings that require a maximum pressure of 150 MPa or 21,750 psi. It is equipped with ...

See the other products
SKF Maintenance and Lubrication Products
propeller pump / transport / manual / oil pressure
propeller pump
300 - 400 MPa (43 500 - 58 000 psi) | 226400 E series

The 226400 range of oil injectors is designed for a wide range of applications. Specifically, they are used for installing and uninstalling railway wheels, fly wheels, couplings, bearings, gear wheels, ship propellers and the like. An ...

See the other products
SKF Maintenance and Lubrication Products
external-gear pump / for abrasive fluids / hydraulic
external-gear pump
0.1 - 2 600 cc/tr, max. 200 bar | ZPA series

radial piston pump / for abrasive fluids / hydraulic
radial piston pump
0.42 - 10.72 cc/tr, max. 700 bar | TRG series

centrifugal pump / for toxic fluids / process / magnetic-drive
centrifugal pump
60 m³/h | DST NeoMag®

The NeoMag® pump is made by DST (Dauermagnet-SystemTechnik) GmbH. This magnetically-coupled centrifugal pump helps customers save up to 30% in energy when compared to competitor's brands, making it one of the more energy-efficient models ...

diaphragm pump / self-priming / for liquids / aspirating
diaphragm pump
F120 series

Flow rate: 0.26, 0.9 l/min
Power: 24, 22.4 W

The liquid diaphragm pump engineered by Thomas offers an up to 900ml/min operating capacity. Its maximum pressure height is 60mH20 with a maximum suction height (dry) of up to 4mH20. The device is applicable for a variety of operations ...

See the other products
Gardner Denver Thomas
diaphragm pump / self-priming / for liquids / aspirating
diaphragm pump
5002F series

Flow rate: 0.4 l/min - 1.1 l/min
Power: 5 W - 8.1 W

The 5002F is a liquid diaphragm pump usually used in the chemical industry, and in ink jet printers. Other useful applications of this equipment is in industrial operations and certain medical devices. Characterized by its ability ...

See the other products
Gardner Denver Thomas
peristaltic pump / self-priming / for medical applications / aspirating
peristaltic pump
SR 10, 30 series

Flow rate: 0 l/min - 0.06 l/min

SR 10/30 series liquid pump is designed in compact architecture that allows convenient modification of its cassette fitting. It permits automated priming tasks, and obtains protective mechanisms through the secured run dry feature. This ...

See the other products
Gardner Denver Thomas
peristaltic pump / self-priming / for liquids / for medical applications
peristaltic pump
SR 10, 50 series

Flow rate: 0.1 l/min - 0.22 l/min

SR 10/50 Series features a peristaltic liquid pump built in a compact design suitable for various applications. It operates through DC or AC with an 8 mH20 maximum pressure and suction height, and 75 to 220 ml/min volume capacity. ...

See the other products
Gardner Denver Thomas
peristaltic pump / self-priming / for liquids / for medical applications
peristaltic pump
SR 25 series

Flow rate: 0 m³/h - 0.69 m³/h

The SR 25 Series are liquid peristaltic pumps engineered by Thomas. They feature a light-weight structure with a fast tubing adjustment. Along with a self-priming, secured dry-running, and maintenance free production. These devices have ...

See the other products
Gardner Denver Thomas
plunger pump / water / for water-jet cutting machines / cleaning
plunger pump
IP55-280DS

Flow rate: 16 l/min
Pressure: 4100 bar

The Jet Edge IP55-280DS water jet intensifier pump is fueled by a 280HP Cummins turbo diesel motor that meets Tier 3 discharges norms. It is perfect for utilization in remote and/or portable areas where power is rare. Moreover, it is ...

centrifugal pump / semi-submersible / for acids / for bases
centrifugal pump
max. 200 l/min | B50 series

Flow rate: 0 m³/h - 12 m³/h
Head: 0 m - 22 m
Power: 0.55 kW - 0.75 kW

These pumps can be used to empty basins and containers of their contents. Also applicable in chemical processes to recirculate chemical materials. These high capacity pumps are easy to assemble, smooth and compact. They are perfect ...

See the other products
Lutz Pumpen GmbH
centrifugal pump / semi-submersible / for acids / for bases
centrifugal pump
B6 series

Flow rate: 21 m³/h - 56 m³/h
Head: 9 m - 15 m
Power: 1.5 kW - 4 kW

The Series B6 is an immersion centrifugal pump that is ideally used for in feeding and recirculating chemicals and solutions in the chemical industry, surface treatment and in the decontamination of water. It transports corrosive and ...

See the other products
Lutz Pumpen GmbH
centrifugal pump / semi-submersible / for acids / for bases
centrifugal pump
B80 HME series

Flow rate: 7 m³/h - 50 m³/h
Head: 11 m - 40 m
Power: 0.37 kW - 7.5 kW

The B80 HME series is a vertical centrifugal pump that possesses installation lengths ranging from 275 mm or 450 mm. It is equipped with a static-dynamic vapour sealing system. This pump can be operated near the container in a dry-well ...

See the other products
Lutz Pumpen GmbH
centrifugal pump / semi-submersible / for acids / for bases
centrifugal pump
B80 KME series

Flow rate: 7 m³/h - 50 m³/h
Head: 11 m - 40 m
Power: 0.37 kW - 7.5 kW

The B80 KME series features immersion centrifugal pumps built in a compact design for low- to medium-performance segment. These are economical pumps designed with a plain bearing, and directly-coupled IEC standard motor. For protection ...

See the other products
Lutz Pumpen GmbH
centrifugal pump / semi-submersible / for acids / for bases
centrifugal pump
B80 KGK G1/G2 series

Flow rate: 18 m³/h - 80 m³/h
Head: 13 m - 41 m
Power: 0.25 kW - 15 kW

The powerful and forceful involvement centrifugal pump is designed with plain comportment and mounted stand on the rolling bearings according to the IEC standard. The KGK G1/G2 series features medium to high pump capacities under nonstop ...

See the other products
Lutz Pumpen GmbH
centrifugal pump / washing / electric / for automotive applications
centrifugal pump
26-34 series

Flow rate: 2 l/min - 2.6 l/min
Pressure: 2.2 bar - 8.8 bar

Designed and engineered by Johnson Electric, this range of windshield and head lamp washer pump utilizes company developed engine with electromagnetic compatibility (or EMC) suppression and high hydraulic performance capacity. These ...

gear pump / for fluids / electric
gear pump
GP series

Flow rate: 0.56 l/min - 3 l/min
Pressure: 3 bar - 7 bar

The Johnson Electric Impeller Pumps are designed to produce high-productive, high-capacity, and low turbulence capacity during operations. These impeller pumps are available in standard modules to ensure quick and easy track progress ...

impeller pump / for fluids / electric
impeller pump

Flow rate: 20 l/min - 83 l/min
Pressure: 0.18 bar - 0.6 bar

The Johnson Electric Impeller Pumps provide to produce high-productive, high-capacity, and low turbulence operations. These impeller pumps are available in standard modules to ensure quick track progress on projects. In addition, these ...

diaphragm pump / for fluids / metering / solenoid-driven
diaphragm pump
LPV series

Pressure: 15 psi - 95 psi

The miniature, chemically-inert fixed displacement pumps manufactured by the Lee Company provide consistent performance, along with significant size and weight savings over conventional peristaltic pumps and syringe. The pumps are ideal ...

centrifugal pump / water / circulation / brushless
centrifugal pump
10 - 26 GPM

Flow rate: 2274 l/h - 5904 l/h

Our Seal-less Brush and Brushless Water Circulating Pumps offers four basic pump/motor designs from 10 GPM (37.9 L/min) to 26 GPM (98.4 L/min) in either 12 VDC or 24 VDC motor designs. Variable speed is available upon request for the ...

centrifugal pump / water / with brushless DC motor
centrifugal pump
12 - 24 VDC

Flow rate: 2.27 m³/h - 5.9 m³/h

AMETEK's range of seal-less water circulating pumps are offered in either brush and brushless motor options. These models have operating rates of 10 GPM (37.9 L/min) to 26 GPM (98.4 L/min), and come in 12 VDC or 24 VDC motor capacities. ...

plunger pump / piston / positive-displacement / paint
plunger pump
64B

Flow rate: 0.95 l/min - 7.57 l/min
Pressure: 103, 207 Pa

64B Nordson® pump are comprehensively designed to accommodate multiple guns with an average volume capacity, or a single gun with high-volume viscosity elements. It operates with positive displacement at minimal cycle ratio, and is engineered ...

See the other products
Nordson Industrial Coating Systems
plunger pump / for abrasive fluids / hydraulic / stainless steel
plunger pump
PermaFlo® series

PermaFlo® Series Pumps with its strong construction and intelligent design can handle the rigors of pumping abrasive, higher solids coatings. It can also accept a varied range of pressure and volume, thanks to its modular construction ...

See the other products
Nordson Industrial Coating Systems
2-piston pump / for fluids / hydraulic / air-driven
2-piston pump
CP

Flow rate: 228 l/h
Pressure: 10400000 Pa

Air-powered dual piston CP Pump is renowned for delivering the exact volume of material to spray guns, by maintaining consistent pressure. Air-driven Nordson® CP pumps can apply coatings in heated and unheated delivery systems. Superior ...

See the other products
Nordson Industrial Coating Systems
positive-displacement pump / piston / airless / paint
positive-displacement pump
25B

Flow rate: 0.45 l/min - 22.7 l/min
Pressure: 40 psi - 2500 psi

The Nordson® 25B is a positive displacement, demand-type, air-operated, hydraulic pump that represents a highly flexible solution for heated or unheated spray systems as well as a variety of high-pressure, airless and low-pressure, higher-volume ...

See the other products
Nordson Industrial Coating Systems
2-piston pump / for fluids / hydraulic / air-driven
2-piston pump
DR

Flow rate: 456 l/h
Pressure: 8300000 Pa

The Nordson Model air- powered dual piston DR pump are developed specifically for the container industry usage in coating materials such as applications in waterborne container, used in both heater and unheated delivery system. Its improved ...

See the other products
Nordson Industrial Coating Systems
bellows pump / paint / booster / stainless steel
bellows pump
26.4 l/min, max. 24 bar | 04.220F FLOWMAX®

Flow rate: 1584 l/h
Pressure: max 24.0 bar

The 04.220F FLOWMAX pump from Sames is a bellow pump that features high output production and does not require cartridge for circulating. This machine is designed for convenient fluid passages for smooth fluid discharge. Furthermore, ...

bellows pump / for fluids / medium-pressure / booster
bellows pump
8:1, 26.4 L/min, max. 48 bar | 08.220FT FLOWMAX®

Flow rate: 1584 l/h
Pressure: max 48.0 bar

High output ,cartridge free bellow pump for circulating and automatic machines. Features Sealing done by one large stroke bellow Ergonomic design of fluid passages Stainless steel design Balanced fluid section Mobile piston seal Benefits High ...

bellows pump / for fluids / medium-pressure / booster
bellows pump
16:1, 14.4 L/min, max. 96 bar | 16.120F FLOWMAX®

Flow rate: 864 l/h
Pressure: max 96.0 bar

For circulating and large production. The Turbo air motor is recommended for continued use. Features Sealing done by one large stroke bellow Ergonomic design of fluid passages Stainless steel design Balanced fluid section Mobile piston ...

piston pump / paint / booster / stainless steel
piston pump
17:1, 3.6 l/min, 100 bar | 17.A2 FLOWMAX® AIRMIX®

Flow rate: 216 l/h
Pressure: max 100.0 bar

The 17.A2 FLOWMAX® pump is equipped with an easy-to-maintain valve assembly sealed with Superlife™ bellow seal ensuring no leakages. Large passages for fluid discharge are all encased in a stainless steel housing that is made compatible ...

piston pump / bellows / for fluids / booster
piston pump
20:1, 26.4 L/min, max. 120 bar | 20.220F FLOWMAX®

Flow rate: 1584 l/h
Pressure: max 120.0 bar

High output, cartridge free bellow pump for circulating and automatic machines. Features Sealing done by one large stroke bellow Ergonomic design of fluid passages Stainless steel design Balanced fluid section Mobile piston seal Benefits High ...