|
|
| Products 121 to 150 of 172 |
|
|
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’
|
|
|
Industry imposes numerous constraints of operations. That is why FG Inox proposes you a range of valves with electrical or pneumatical actuators simple or double effects, 2 or 3 ways (L or T) from ND 15mm to 50mm.
|
|
|
Top-Flo® sample valves are specially engineered to be the finest in the industry and incorporate many features and benefits not found on other sampling valves. Top-Floreg; sampling valves come standard with minimal internal deadleg area designed into each valve, keeping hold up volume to a minimum for accurate samples every time. Right Angle or In-Line models can be supplied as main components (special bored cap and main body) to allow the user to fabricate their own size configurations on an as needed basis. Right Angle or In-Line models available from stock in sizes 1/2" to 4" clamp end x hose barb.
|
|
1. Made only from rust proof and acid resistant stainless steel.
2. For a wide range of applications in all industries.
3. No pressure drop due to full flow bore.
4. Easy operation, even under high pressure.
5. Long life due to exchange seals.
6. Individually works tested.
|
|
Series 020 - DN04 to DN50
Body, ball, stem : stainless steel. SS316Ti
Fields of application:
chemical and petrochemical industry, environmental installations, off-shore, water, high pressure cleaning systems (Seats and seals adapted to application)
|
|
1-Piece, Instrumentation, 40 Series Ball Valves
1-Piece, Instrumentation, 40G Series Ball Valves
2-Piece, Instrumentation 33 Series Ball Valves
3-Piece, Alternative Fuel Service, High Pressure (up to 6000 psig [413 bar])
3-Piece, Instrumentation, High-Pressure (up to 10 000 psig [689 bar]), 83 Series Ball Valves
3-Piece, Multipurpose SK Series Ball Valves
3-Piece, Process / Instrumentation, 60 Series Ball Valves
|
|
Ultra Purity
Product standards:
Technical indicators:
Working pressure: 10kg/ c
Durability test: 5000 cycles
Inboard leaking rate: 1x 10-9 atm cc/sec
Internal leaking rate: 1x 10-9 atm cc/sec
Outboard leaking rate: 1x 10-9 atm cc/sec
Performance demand:
The leaking rate meets the SEMI F1 standards
under the technical indicators circumstances
mentioned above.
|
|
|
|
|
|
Any leakage of gas or liquid has to be avoided at all cost. SOMAS ball valve is designed to take care of this issue. The valve is a full bore, flanged ball valve with cylindrical bore made in dimensions from DN 25 to DN 400. The valve is made from stainless steel with spring loaded seats for good tightness, even at low differential pressure.
The valve ball is hardchromed as standard, but can also be supplied with Hi-Co coating. The valve can be supplied with actuator and accessories for manual operation, on/off or control applications.
Ball valves also in 3-piece form
SOMAS 3-piece full-bore ball valves are mainly intended for use as manually operated valves or remotely actuated on/off valves. The ball valve meets ISO standards.
The valve is available with threaded ends, welding ends or flanges. It is also possible to combine different types of ends.
SOMAS 3-piece full-bore ball valves are equipped with seats of two materials. Fibreglass-reinfoced PTFE as standard, or carbon-filled PTFE adapted for steam.
|
|
Overview
An economical way to shut-off air lines. Nut bottom available for pressures to 200 psig with 1/8" port. Many handle configurations. Spring bottom with 5/32" port standard.
Features
- Spring bottom cocks tested at 80 psig air
- Available in satin or polished brass or satin chrome
- Maximum temperature is 500°F Satin Brass
Standard -01
Nut Bottom-04
|
|
BuTech Pressure Systems offers an extensive line of check valves, needle valves, 2-, 3-, 4- and 5-way ball valves with 3/16" to 1" ports (4.7mm to 25.4mm), as well as fittings, tubing and related equipment for petroleum production.
Our sub-sea valves are custom designed for instrumentation, process control and chemical injection applications in the harshest environments. Designed for Remote Operated Vehicle (ROV) operation, these valves provide rugged protection, safety and reliability in template control panels, sub-sea wellheads and christmas trees.
Manufactured to meet the requirements of NACE MR-01-75, API spec. 6A and 17D, and numerous other specifications, BuTech sub-sea valves ensure trouble-free operation in hydrogen sulfides, corrosion inhibitors, paraffin thinners, hydraulic fluids and many other chemicals.
|
|
|
|
|
|
HILCO Transfer Valves assure positive sealing for uninterrupted flow and a low pressure drop. They feature an innovative spring loaded pad and shaft design with large cross-section O-ring seals. Top and bottom covers with centering pilots provide support to the body to resist deformation from pipe strain. The turning mechanism features a choice of handle, wormgear or actuator designs to meet your requirements.
Built to Hilliard's exacting standards, these transfer valves allow for replacement of the pads without replacement of the entire valve. Six standard sizes are available (1-1/2" to 8"), as well as a split transfer valve model designed for duplex coolers.
Continuous flow transfer valves are available in carbon steel, 304, and 316 stainless steel. “B” design, and “D” (zero leakage) design valves are available in polymer-coated stainless steel.
HILCO also manufactures 3-way valves coupled together with a common actuator and handle for duplex cooler applications. This helps to minimize extensive piping runs previously required while at the same time, reducing overall costs.
|
|
Trunnion ball valve
ND (nominal diameter): 25-800
other diameters or pressures under request
NP (nominal pressure): 6-420
MAIN TECHNICALS SPECIFICATIONS
Execution : A105 or 316L
Double floating seats
Sets of table linen anti-blow of ram and replaceable
Three gaskets
Anti-statique
Anti-feu according to standard API 6 FA / API 607 / BS6755
Traffic of the fluid in both senses
Technology: Molded or Forged
Principle: Sphère arbrée
|
|
For operating under full pressure!
For use at extremely high pressure (ex. high pressure water jet-technology) Rötelmann offers ball valves made of high-tensile chrome molybdenum steel with a nominal pressure of PN 2.500 (nominal size DN 10).
|
|
OEM & ODM BALL
Made by: Investment Casting, Sand Casting, Bar Stock,
Centrifugal Casting, and Forged Casting.
Materials: Kinds of Stainless Steel & Carbon Steel.
Outside Diameter: 10mm ~ 350mm.
100% according to your specification!
|
|
| ... products without technical information |
| |
|
Ball valves are durable and usually achieve perfect shutoff, even after years of use. They are an excellent choice for shutoff applications and preferred to globe valves and gate valves for this purpose.
|
|
|
|
Ball valves, Plug valves
