|
|
|
|
|
|
Parker’s RB01 Ball Valves are used as service valves in split air-conditioning and heat-pump systems or in commercial refrigeration applications. The valves isolate sections of a system for servicing and provide a means for charging refrigerant into a unit.
* Full-flow design provides low-pressure drop for maximum system performance.
* One quarter-turn, low-torque actuation allows the valve to be open or closed providing simple and easy servicing.
* Use of a standard crescent wrench provides simple quarter-turn actuation.
* Copper-sweat connections provide basic ends for brazing and eliminate the need for flux, simplifying the installation process.
* Brass body and copper-connection tubes virtually eliminate corrosion-related problems.
* A unique copper-forming process is used to captivate the valve ball, seals, and spring, eliminating potential leak paths and providing consistent and superior sealing.
* Pad and post-mounting are available to provide additional support to the valve, if necessary.
* Multiple end-configurations are available, along with assemblies, to meet the unique needs of a unit.
|
|
Product Type: Valve, Refrigeration Ball
Size: 3/8
Connection: 3/8
Body Material: Brass
Additional Detail: Full Port
|
|
|
Rotary plug valves suitable to control high flow rates with high rangeability. The triple eccentric seat/plug design guarantees zero leakage and low initial breakaway torques when opening and closing.
|
|
2-Way Brass KZValve (shown with KZCO's EH3 compact, low torque actuator)
VALVE FEATURES:
- 2-way brass ball valve with threaded outlets
- Valve sizes from 1/4" to 2"
- Valve Body: Bronze (C84400)
- Ball and Stem: 316SS
- Seat: Virgin PTFE
- Stem Packing: PTFE
- Threaded ports
- Manual override capabilities
- Max PSI 600 @ 70F
ACTUATOR FEATURES:
- High quality, durable actuator housing rated NEMA 6P for waterproof applications and NEMA 7D for Ignition Protection applications
- 12/24 VDC and 24 VAC operation available
- Tough aluminum gear box with metal gears
- Actuator housing available with "indicator flag" or with "blank" lid
- Waterproof wire plug connectors
- Private labeling available
Consult our Engineering or Sales staff for application assistance.
|
|
Description:
These valves have a maximum operating temperature of 302° F (150° C). Sizes ¼″ - 2″ are pressure rated at 600 psi non-shock and 150 WSP saturated steam. Sizes 2½″ - 4″ are pressure rated at 400 psi non-shock and 150 WSP saturated steam. They meet requirements for a full range of liquids, have plated carbon steel handle with blue vinyl insulator, large, full-size ports, full-port design, NPTF threads, quick 1/4-turn handle and a low operating torque. They are available in 1/4" - 4" sizes.
|
|
CLINCHER®
Series 2000 Ball Valves
A rugged ball valve line designed for a wide range of applications offered in both standard and our FIRE-TITE® fire tested seat versions. Available for both manual and automatic operation.
SIZES 1/4" - 2" (DN6 - 50)
MAX. PRESSURE 800psi (55bar)
MAX. TEMP. 500° F (260° C)
BODY / TRIM MATERIALS Brass Carbon Steel 316SS
|
|
C-FBV-1: 2-Piece, Full Port, Carbon Steel Ball Valves
Description:
Series C-FBV-1 2-Piece, Full Port, Carbon Steel Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features a bottom-loaded blowout-proof stem. The C-FBV-1's full port orifice ensures maximum flow capacity, while reinforced PTFE seats, PTFE stem packing, thrust washer and body seal provide maximum safety and high operating pressure /temperature limits. Pressure Rating: 1000psi WOG (non-shock) and 125psi WSP.
|
|
Features:
*Pipe thread in accordance with ANSI B2.1,
BS 21 1973, DIN 259/2999, ISO 228
*Blow-out proof stem
*Investment casting body and cap
*6000WOG (PN414)
OPTION:
Mounting pad ISO5211
Locking device (Mounting pad type only)
|
|
Series 3000 Ball Valve
Jamesbury brand, Series 3000 ball valves are perfect for applications where positive, long-lasting shutoff is required. Ideal for vent, bypass, sampling and gauge isolation, these valves provide cost-effective shutoff in a wide range of process industry, manufacturing, commercial and OEM services. Seating options permit the handling of steam and applications with wide temperature swings.
|
|
Temperature Control Valve - Series 36R
Self-Contained Valve/Actuator/Sealed Thermal System in One Compact Unit, Direct-Acting/Reverse-Acting
Control Valve - Series Hi-Flow
Linear Characteristics, 1/2" to 4" Sizes, 2-way or 3-way
Pneumatic Pilot Valve - Series 2V
2-way or 3-way, Ideal for Air/Water/Gas/Steam Service, Bronze Body
|
|
Ball Valve Type 546
Flexible high quality ball valve with many additional features for all applications
Ball Valve Type 375
The perfect ball valve for non critical applications
Ball Valve Type 343
Reliable 3-way ball valve for diverting and mixing-processes. Available in horizontal and vertical direction
Ball Valve Type 323
A professional ball valve for exact dosing of media
Ball Valve Type 322
Easy and safe valve for laboratory applications
Ball Valve Type 353 - 355
The standard ball valve for all water applications
|
|
|
|
|
|
Two Proportional Flow Control Rates with One Valve: Hayward ProFile2 corrosion resistant, proportional control ball valves provide two linear flow curves; one for fast opening and one for slow opening. The percentage of flow through the valves with either flow curve is equal to the degree of opening. As the valves are opened or closed, the flow varies in direct proportion to the valve opening. This permits predictable, accurate control of the downstream flow rate with a 1/4 turn valve.
Unique Design "Characterized" Ball: These valves utilize a unique, patented ball with a special "characterized" opening that results in the linear flow rate change. Valves are shipped with the ball installed so that the smaller opening enters the flow first, creating the slow open rate. To switch to the fast opening rate, simply reverse the ball in the valve. With the larger opening first, the flow starts fast with slower, more controlled changes as the ball is turned to "full open".
Perfect With Positioners: Hayward ProFile2 Proportional Control True Union Ball Valves can be supplied with optional electric or pneumatic actuators with positioners for automated modulating service applications.
Never a Problem with Corrosion: Because of their all plastic construction, Hayward ProFile2 ball valves will never rust or corrode. They can survive corrosive environments and harsh weather conditions without the need for painting or expensive epoxy coatings.
|
|
|
|
|
|
Habonim has extended its range to meet industrial demands for flow control systems that are accurate, flexible, cost efficient and maintenance friendly. Many complex requirements come into play when designing flow process operations, and no other valve design available today offers a more cost effective solution without compromising flow control functionality. Ball valves provide excellent performance, even in the harshest environments, and offer a compact lightweight design solution; step-less characterized control of pressure and flow for fast response times, wide rangeability and bubble-tight shutoff for increased valve longevity even in the most demanding conditions. Critical features include high pressure drop capacity with straight-through flow, high Cv, and large exhaust capacity with added design features for ease of maintenance and zero backlash.
- Size Range:1/4" - 8"
- Application: General Service, Chemical, Petrochemical, Oil and Gas, Refinery, - Energy, Pharmaceutical, Food & Beverage, Cosmetics, Semiconductor
- Service: Water, Gas, Steam, Chemicals, Solvents, Thermal Fluid
- Pressure Range: Vacuum 10-6 torr to 210 bar
- Temperature Range: -40°C to 350°C
- Materials: Carbon Steel, Stainless Steel, Hasteloy-C, Hasteloy-C22, Alloy-20,
- End Connection: Screwed, Socket & Butt weld, Flanged, Clamp, Compression Fitting
|
|
|
|
|
|
In light of the increasing demand for alternative sources of clean energy, Habonim's Cryogenic Ball Valve Division is certain to ensure Habonim's position in the forefront of the dynamic energy market. Under extremely low temperatures and in the harshest of environments, Habonim products consistently exhibit high flow capacity, tight shutoff, energy efficiency and long service-free life. The result is a product unmatched in reliability, stability and most importantly, safety, for use in air separation plants, LNG storage, distribution and transportation, aerospace, petrochemical and medical industries.
TECHNICAL SUMMARY:
- Size Range: 1/4" - 21/2" (DN6 - DN65)
- Application: Speciality Gas, Food Processing, Metallurgy, Rubber & Plastic, Transportation, Automative, Chemical, Dry Cleaning, Electronic & Space
- Cryogens: Nitrogen, Oxygen, Hydrogen, Helium, Argon, Fluorine, Methane
- Pressure Range: Vacuum to 100 bar
- Temperature Range: -250°C to 100°C
- Materials: Stainless Steel, Brass, Monel
- End Connections: Screwed, Socket & Butt weld, Flanged
- Operation: Hand or Gear operated, Pneumatic or Electric Actuated
|
|
CONSTRUCTION
Full bore, one piece "Top Entry" body, double "block & bleed" trunnion mounted ball, relief seats, anti-static device, fire safe, blow-out proof stem.
CHARACTERISTICS
Internal wetted parts are in acc. to NACE Standard MR0175.
Effective tight seal event at low differencial pressures.
Easy operation at high pressures.
Maintenance in line.
|
|
CRYOGENIC VALVE
TYPE GATE, GLOBE
SIZE RANGE 1/4” TO 24”
BONNET TYPE BOLTED, WELDED
MATERIAL F304, F304L, F316, F316L, CF8, CF3, CF8M, CF3M
PRESSURE RANGE CL 150 TO 1500
ENDS SCREW, SOCKET WELD, BUTT WELD
FLANGE: ANSI, JIS, DIN
OPERATOR HANDWHEEL, CHAINWHEEL, BEVEL GEAR, PNEUMATIC, HYDRAULIC, MOTORIZE
|
|
|
|
|
|
Ball Valves
Size range : DN15 - DN80 1/4" - 3"
Pressure rating : DN15-50 PN50 DN65 & 80 34 BAR
End connections : Screwed, Socket weld / butt weld
Configurations : 3-piece bodied as standard up to DN80/3". DN65/80 (2 1/2" / 3") wafer type aslo. RB as standard, FB & penumatic actuator on request. Fire block/emergency shut off
Materials : Bronze, gunmetal, austenitic stainless steel
Bestobell three-piece ball valves are designed specifically for cryogenic applications. The valves have many features which make it well suited to this task including:
* Spring loaded gland seal giving low torque levels under both ambient and cryogenic conditions
* One piece design, anti-blowout stem
* Relief hole to prevent trapping of liquefied gases
* Designed to prevent incorrect re-assembly after maintenance
* Removable centre assemble to allow inter-changeability in existing installations
* Suitable for retrofitting of electric or pneumatic actuators.
Extended spindle valves are available for liquid service, along with standard spindle lengths for use on ambient gas requirements. All materials used are selected for their suitability to function at cryogenic temperatures. All valves are degreased for oxygen duty.
|
|
|
MCF Valves center sections are the heart of and first choice in selecting the type of valve to suit your application. The starting point for MCF design engineers is the concept that all valve components share a geometric simple and eloquent design. Transferring this concept to manufacturing of components produces valves to the highest repeatable manufacturing tolerances in the industry. MCF Valves delivers to you an assembled and tested valve that is leak free, easy to install, easy to use, easy to maintain and built to last.
|
|
|
|
|
|
Whatever you want from a Bulk Materials cut-off valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’
|
|
Ramen spherical sector valves can be used for
most arduous applications, especially
for shutting off and regulating granular and/or
paste-like media. Due to the spherical
cutout sectors, they are self-cleaning and
offer precise control.
|
|
|
|
|
|
The SOMAS ball segment valves can be used for a wide range of applications. By superior design, combined with materials used SOMAS can solve most of the control and shut-off applications within the process industry. With segment and shaft made in one piece the actuating torque is transmitted without backlash. In combination with SOMAS actuators and positioners they are perfect control valves for long maintenance-free operation. Using our basic design, which incorporates a high degree of flexibility, we can offer solutions for most applications.
The ball segment valves are basically used as a control valve combined with tight shut-off. The characteristic is between linear and equal percentage (logarithmic). Therefore the valve can be used in most installations. When combined with a SOMAS pneumatic actuator and positioner the result will be a valve package with a wide control range. SOMAS ball segment valves with a variety of trim options, body styles and materials can be used to satisfy most control applications.
With sizes from DN25/2 up to DN700 SOMAS can solve most of the control and shut-off applications within the process industry.
|
|
The ISIS ball valve, with full bore, is a product particulary suitable for ensuring a high working reliability at medium pressure in water installations. It is certified by BRITISH GAS and by WATER RESEARCH CENTRE.Blow-out proof system, with perfect air bubble sealing, does not need any maintenance, is equipped with wrapping seats ensuring long life cycles.
An antifriction ring forms the first automatic sealing at high pressure.
Two self-adjusting cone-shaped seals, with PTFE-PTFE sliding, therefore without wear, form the second sealing at low pressue.
1 O-Ring in NBR for sealing at low pressure and vacuum.
All valves are tested at 25 bar pressure, for a period longer than 48 hours.
|
|
- BALL VALVES :
- BRASS VALVES
- CAST IRON VALVES
- STAINLESS STEEL VALVES
- CARBON STEEL VALVES
- PVC VALVES
|
|
ART. 424
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS, BUTT WELD OR T-CLAMP
ART. 429
2-WAY FULL-BORE THREE PIECE CASTED STAINLESS STEEL BALL VALVE, THREADED-ENDS OR BUTT WELD
ART. 434
2-WAY FULL-BORE STAINLESS STEEL BALL VALVE, DIN 11851 FEMALE THREADED-ENDS
ART. 445
3-WAY FLAT BODY FLANGED STAINLESS STEEL BALL VALVE, “L” PORT
ART. 448
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “L” PORT
ART. 450-451
3-WAY FULL-BORE THREADED-ENDS STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 460-461
3-WAY FULL-BORE FLANGED STAINLESS STEEL BALL VALVE, “T” OR “L” PORT
ART. 464-465
3-WAY FULL-BORE STAINLESS STEEL BALL VALVE, “T” OR “L” PORT, DIN 11851 FEMALE THREADED-ENDS
|
|
TORK Electric actuated valves are two series
1. Electric actuated ball valve
2. Electric actuated butterfly valve
TORK Electric actuated ball valve,T-EAV900Serie, are two main parts, a quater turn,90 degree turn electric actuator and ball valve. Out put torque value of electric actuator (Nm) , must be more 25%
than out put torque value of ball valve (Nm).
application: ball valves,butterfly valves,dampers,plug valves , on-off or proportional control
|
|
|
The AF series, Anti Static Fire Safe valves are designed and tested to the requirements of API 607 4th Edition and to BS 6755 Part 2 specifications. The valves contain soft seat rings. In the event of fire, a secondary metallic machined fire lip on the end connector comes in contact with the ball and prevents leakage through the valve port. The anti static fire safe stem incorporates a machined fire lip, which will prevent leakage once the thrust seal is burned off. All AF valves are fitted with expanded graphite body seals and stem packing. All AF valves have 8 body bolts threaded to the body
|
|
Split body floating ball valve
ND (nominal diameter): 4-200
other diameters or pressures under request
NP (nominal pressure): 6-160
MAIN TECHNICALS SPECIFICATIONS
Execution : A105, AISI 316, ISO, ANSI 515.
Can have risen with any types of actuators
Connection of actuators following one ISO 5211
Anti-statique
Management of the fluid in both senses
Technology: Forged
Principle: 2 pièces
|
|
CONSTRUCTION
Full bore, fully welded body, floating ball, high performance low emission double stuffing box, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance low emission double stuffing box.
Internal wetted parts are acc. NACE Standard MR0175.
OPTIONS
API 6D
GN - PE EM-D20-E (Gas Natural S.d.G.)
|
|
CONSTRUCTION
Full bore in L, T, or X, floating ball, supported by four seats, high performance low emission double stuffing box, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance low emission double stuffing box.
Internal wetted parts are in acc. to NACE Standard MR0175
|
|
CONSTRUCTION
Full bore, fully welded body, floating ball, high performance low emission double stuffing box, relief seats, anti-static device, fire safe, pressure balance hole in ball, blow-out proof stem.
CHARACTERISTICS
High performance low emission double stuffing box.
Internal wetted parts are in acc. to NACE Standard MR0175.
|
|
|
|
Ball valves, Plug valves
